|
04-25-2017, 05:45 PM | #1 |
Mach & Cheese
Join Date: Mar 2014
Location: Richmond VA
Posts: 797
|
Injector and MAF question
I have a set of stock Mach 1 injectors that I may install on my 99 GT after I put a 70-75mm TB, upper plenum, cold air intake, and 4:10 gears. My questions are: would it even be worth the effort with those mild mods, and even if it is worth it or not. Let's say I did install the injectors, could I install a stock Mach 1 MAF with the injectors as a plug and play setup or would I still need to retune?
Thanks for any help you may have. |
04-25-2017, 06:36 PM | #2 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Injector and MAF question
The maf on these cars isn't calibrated to a set of injectors or anything. Change the injectors and the une needs updating. Change the maf and the tune needs updating
Changing the injectors won't gain you a thing unless the others are maxed out
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|