2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Body, Chassis & Interior

Body, Chassis & Interior Body, Chassis and Interior mods/discussions

Reply
 
Thread Tools Display Modes
Old 01-20-2005, 06:54 PM   #1
rsdunphy
Registered User
 
rsdunphy's Avatar
 
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
In Dash Rattle

Need help from all you Guys and Gals out there. I have had my Mach at the dealership for that dreaded in dash rattle. It sounds like a washer in a tin can when accelerating or just cruising along on the right road surface. I tried calling Ford to no avail. I am unable to get to the TSB database. Any help out there in Mach Land would be greatly appreciated. I have read all the threads about it and am not sure if it is coming from the shaker. I have raised the shaker and the sound is the same as when it was new.
__________________
Ex Owner:

2004 Azure Blue Mach 1
5 Speed
K&N Aircharger
Roush Stage 3 Suspension
Steeda Race Wing
Goodyear Eagle F1's, 255's Front, 315's Rear
MRT 10.5" Rear Bullits,9" Front Bullits
ROTORPRO's Slotted Rotors
Raised Shaker Hood 1/4 Inch
Build date 02/23/2004
rsdunphy is offline   Reply With Quote
Old 01-20-2005, 07:05 PM   #2
shake this
Registered User
 
shake this's Avatar
 
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
Re: In Dash Rattle

Is it from the dash or outside the car?

If it's from the dash, do you know what side? Driver side, center, or passenger side?

I had a bad rattle/squeak from the center trim ring around the a/c , radio. Took it off, added some 3M molding tape (any bodyshop will have it) put it all back on and now all is quiet.
__________________
Steeda tri axe shifter
MRT H pipe w/Magnaflow cat back exhaust
JLT air intake
PHP intake spacer
Aluminum Driveshaft
SLP line-lock
4.10 gears
Moser axles
welded axle tubes
ET Radials
Dyno 300whp 318wtq n/a

415whp 515wtq NX 125 shot
Someone needs to slap the stupid outa you
shake this is offline   Reply With Quote
Old 02-18-2005, 06:53 AM   #3
topkat
Registered User
 
topkat's Avatar
 
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
Re: In Dash Rattle

Quote:
Originally Posted by shake this
Is it from the dash or outside the car?

If it's from the dash, do you know what side? Driver side, center, or passenger side?

I had a bad rattle/squeak from the center trim ring around the a/c , radio. Took it off, added some 3M molding tape (any bodyshop will have it) put it all back on and now all is quiet.

In my best Guinness guys voice ... "BRILLIANT!!!!!!!!"

I did this 2 days ago and the squeek is gone. I called my dealership (which has had the car 5 times for the squeek) and told them the fix and implied that maybe they should have thought of that. MORONS!!!!!! More like "DON'TGIVEADAMNS".

Shake This proceed to the nearest watering hole and order up a tall frosty one and send me the bill. 6 months of torment ended by a 5 dollar roll of tape and 10 minutes work.
__________________
2004 Mach 1 Black
5 speed with IUP

MRT Catted H
MRT Max Flow V cat back
PHP intake spacer
MRT StreetSmart intake
MGW Chrome Interior Pieces (Everything but coathooks).
MGW Short Throw Shifter (Blue Handle)
Silver stripes on the side removed hood stripe
B&M hammerhead T handle shift knob

Coming someday:
Polished shaker
topkat is offline   Reply With Quote
Old 02-18-2005, 07:54 AM   #4
azureT03
Formerly Comporangemach1
 
azureT03's Avatar
 
Join Date: Apr 2004
Location: Prospect, CT
Posts: 1,794
Lightbulb Re: In Dash Rattle

I have the dash rattle too. But mine rattles sometimes then the other times it makes a creaking sound like around the ac vents in the middles, and only does it at highway speed.
Cdover- I have noticed the same thing.

I got a shifter gasket set from cobrabob that is a thin piece of rubber that goes on the base and where the handle goes on. I really want to put it on so it would stop that noise.
__________________
2003 Azure Blue Mach1
5 Speed IUP
Built- April 11,2003
Bought- July 7,2006
Died- March 3,2007
17x8 Bullitt Rims
Cooper Zeon 2XS Rubber
Retro Trim Rings
MGW Shifter
Pauls High Performance Airbox w/ Resonator Plug
279.1rwhp
295.9rwtq
azureT03 is offline   Reply With Quote
Old 01-20-2005, 07:08 PM   #5
rsdunphy
Registered User
 
rsdunphy's Avatar
 
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
Re: In Dash Rattle

Definitely inside the car, center/left in dash. The dealer has put extra molding tape around the inside dash trim parts.
__________________
Ex Owner:

2004 Azure Blue Mach 1
5 Speed
K&N Aircharger
Roush Stage 3 Suspension
Steeda Race Wing
Goodyear Eagle F1's, 255's Front, 315's Rear
MRT 10.5" Rear Bullits,9" Front Bullits
ROTORPRO's Slotted Rotors
Raised Shaker Hood 1/4 Inch
Build date 02/23/2004
rsdunphy is offline   Reply With Quote
Old 01-20-2005, 08:29 PM   #6
topkat
Registered User
 
topkat's Avatar
 
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
Re: In Dash Rattle

Have you VERIFIED that they did??? Mine said they did, I got so pissed when the rattle was still there, I decided to have a lookie poo myself and guess what ... NOT A DANG THING between the trim and the console. Just my experience, hope yours is different.
__________________
2004 Mach 1 Black
5 speed with IUP

MRT Catted H
MRT Max Flow V cat back
PHP intake spacer
MRT StreetSmart intake
MGW Chrome Interior Pieces (Everything but coathooks).
MGW Short Throw Shifter (Blue Handle)
Silver stripes on the side removed hood stripe
B&M hammerhead T handle shift knob

Coming someday:
Polished shaker
topkat is offline   Reply With Quote
Old 01-21-2005, 10:10 AM   #7
Drenath
Registered User
 
Drenath's Avatar
 
Join Date: Feb 2004
Location: Arlington Heights, IL
Posts: 641
Re: In Dash Rattle

Hah, my rattle ended up being the seatbelt buckle against the side interior wall
__________________
Azure 2003 Mach 1 - 5spd
First Eaton swap - 446 rwhp
Drenath is offline   Reply With Quote
Old 01-22-2005, 10:03 AM   #8
cdover73
Guest
 
cdover73's Avatar
 
Join Date: Nov 2004
Location: Greensburg, LA
Posts: 131
Re: In Dash Rattle

What shift handle do you have? I just found out this morning that the noise I thought was coming from the center dash turned out to be the Pro 5.0 shifter I put in. The noise was resonating through the handle due to the lack of the rubber between the shifter and the base stick. I found it when I put my hand on it and it stopped. If I hadn't done that I would have sworn the noise was from the trim in the dash. These things always amaze me!
cdover73 is offline   Reply With Quote
Old 01-23-2006, 10:50 AM   #9
XCELR8
Registered User
 
Join Date: Sep 2004
Location: Virginia
Posts: 328
Re: In Dash Rattle

Quote:
Originally Posted by cdover73
What shift handle do you have? I just found out this morning that the noise I thought was coming from the center dash turned out to be the Pro 5.0 shifter I put in. The noise was resonating through the handle due to the lack of the rubber between the shifter and the base stick. I found it when I put my hand on it and it stopped. If I hadn't done that I would have sworn the noise was from the trim in the dash. These things always amaze me!

yup! my shifter does that to! No biggy though.
XCELR8 is offline   Reply With Quote
Old 02-26-2012, 10:13 AM   #10
768MPH
Registered User
 
Join Date: Dec 2011
Location: Fort Riley, Kansas
Posts: 250
Re: In Dash Rattle

Quote:
Originally Posted by Drenath View Post
Hah, my rattle ended up being the seatbelt buckle against the side interior wall
LOL, that got me too. I was tearing my car apart for weeks and it hit me one day. I was like WTF! Oh well. It's done.

Now I have a rear deck lid rattle
__________________
2009 G8 GT
Rotofab CAI
ARH 1 7/8" LTs -3" catted X
Hooker Maxflows - SLP Tips
Pat G Tune

366rwhp/375rwtq

2003 MACH 1- SOLD

"The Infantry doesn't change, we're the only arm of the military where the weapon is the man himself"
-C.T. Shortis
768MPH is offline   Reply With Quote
Old 05-05-2005, 05:26 PM   #11
SpringTown Mach
Registered User
 
SpringTown Mach's Avatar
 
Join Date: Sep 2004
Location: Spring, Texas
Posts: 47
Re: In Dash Rattle

Ford has supposedly done the fix on my trim ring and a/c vents, but the darn thing still rattles like crazy, can someone tell me how to get the trim ring off so that I can fix it myself?

Thanks

Wes
__________________
I Feel The Need....
SpringTown Mach is offline   Reply With Quote
Old 01-22-2005, 10:34 AM   #12
topkat
Registered User
 
topkat's Avatar
 
Join Date: Aug 2004
Location: Dacula, GA
Posts: 271
Re: In Dash Rattle

mine has had it since day 1. I have put in an MGW handle, and the A/C knobs and nothing changed so I don't think it was my shifter or something on the dash. It sounds like it is coming DIRECTLY from the A/C vents in the center. Maybe I'll tear those apart next.
__________________
2004 Mach 1 Black
5 speed with IUP

MRT Catted H
MRT Max Flow V cat back
PHP intake spacer
MRT StreetSmart intake
MGW Chrome Interior Pieces (Everything but coathooks).
MGW Short Throw Shifter (Blue Handle)
Silver stripes on the side removed hood stripe
B&M hammerhead T handle shift knob

Coming someday:
Polished shaker
topkat is offline   Reply With Quote
Old 02-18-2005, 09:24 AM   #13
shake this
Registered User
 
shake this's Avatar
 
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
Re: In Dash Rattle

topcat, always happy to help.
__________________
Steeda tri axe shifter
MRT H pipe w/Magnaflow cat back exhaust
JLT air intake
PHP intake spacer
Aluminum Driveshaft
SLP line-lock
4.10 gears
Moser axles
welded axle tubes
ET Radials
Dyno 300whp 318wtq n/a

415whp 515wtq NX 125 shot
Someone needs to slap the stupid outa you
shake this is offline   Reply With Quote
Old 02-18-2005, 12:05 PM   #14
rcode99
Registered User
 
rcode99's Avatar
 
Join Date: Sep 2003
Location: Northeast Illinois
Posts: 2,235
Re: In Dash Rattle

I had Ford fix my vent rattle under the TSB. But I have another that I need to fix. How do you get the upper portion of the trim that is just above the one you take out when switching shifter kits. I have a squeak/rattle there that I know will be fized with some double faced tape.
__________________
RCode99
U.S.A.F (Ret'd)

"Never slap a man who has a mouthful of chewing tobacco." Will Rogers said that.
rcode99 is offline   Reply With Quote
Old 02-18-2005, 12:37 PM   #15
shake this
Registered User
 
shake this's Avatar
 
Join Date: Oct 2004
Location: Lubbock, TX
Posts: 1,559
Re: In Dash Rattle

Are you talking about the one that goes around the radio and a/c unit?
__________________
Steeda tri axe shifter
MRT H pipe w/Magnaflow cat back exhaust
JLT air intake
PHP intake spacer
Aluminum Driveshaft
SLP line-lock
4.10 gears
Moser axles
welded axle tubes
ET Radials
Dyno 300whp 318wtq n/a

415whp 515wtq NX 125 shot
Someone needs to slap the stupid outa you
shake this is offline   Reply With Quote
Old 02-18-2005, 05:28 PM   #16
rsdunphy
Registered User
 
rsdunphy's Avatar
 
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
Re: In Dash Rattle

I FOUND IT! I FOUND IT! I FOUND IT!
It was the parking break handle's button and/or the spring inside. My Ford dealer said he will replace it when I get back. (In the navy and away now)
__________________
Ex Owner:

2004 Azure Blue Mach 1
5 Speed
K&N Aircharger
Roush Stage 3 Suspension
Steeda Race Wing
Goodyear Eagle F1's, 255's Front, 315's Rear
MRT 10.5" Rear Bullits,9" Front Bullits
ROTORPRO's Slotted Rotors
Raised Shaker Hood 1/4 Inch
Build date 02/23/2004
rsdunphy is offline   Reply With Quote
Old 02-18-2005, 07:37 PM   #17
substanger
MachJunkie
 
substanger's Avatar
 
Join Date: Oct 2002
Location: KC area
Posts: 2,251
Re: In Dash Rattle

Welcome To Mustang Ownership. Only Going To Get Worse!
__________________
Past Mustang Ownership...'03 Mach 1 (Sold 11/07/06), '84 GT-5 speed-my first 'stang; '91 GT-5 speed; '70 M-code(351C) Mach 1; '95 Supercharged GT-S, 5 speed, totalled; '95 GT-S, 5 speed-replacement for totalled GT-S; '90 LX 5.0 5 speed; '89 LX 5.0 convertible 5 speed; '69 M-code(351W) Mach 1, 4 speed, A/C, fold down, slats, both spoilers; '90 LX 5.0 convertible.
substanger is offline   Reply With Quote
Old 04-06-2005, 02:16 AM   #18
Mach32v
L5 Mach
 
Mach32v's Avatar
 
Join Date: Mar 2005
Location: Westmont ,IL
Posts: 108
Re: In Dash Rattle

Quote:
Originally Posted by substanger
Welcome To Mustang Ownership. Only Going To Get Worse!
I'm with this dude. I love my Mach 1 but I swear sometimes Ford had their heads way up their azzes when they put some of these cars together. To make matters worse I cringe at almost any service experience I have with their azz hole techs. My friend has an 01 GT and he's had both heads replaced because of the spark plug blowout. If I wasn't such a mustang lover I would tell Ford to lick my sack! Just my feelings on the topic.

Last edited by Mach32v; 04-08-2005 at 12:17 AM.
Mach32v is offline   Reply With Quote
Old 04-28-2005, 09:49 PM   #19
JohnnyMustang
Registered User
 
JohnnyMustang's Avatar
 
Join Date: Mar 2005
Location: greensburg, pa
Posts: 53
Re: In Dash Rattle

got the rattle middle of dash by ac , its weird tho if i push on it while its making the noise it goes away but when i quit pushing on it it starts again, im trying the tape...nothing major just annoying i guess
JohnnyMustang is offline   Reply With Quote
Old 05-04-2005, 12:54 PM   #20
Big Ron
Original 03 TR Owner
 
Big Ron's Avatar
 
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
Re: In Dash Rattle

TTT

just got back from the dealer for the third time.......I now have the A/C-radio trim ring, the auto shifter bezel, and the guage lens covering off and out of the car.......still have a rattle in the left center of the dash. Sounds like it's coming from the trip odometer area. I've cleaned out the glove box, cup holder and the center console. I took the shop foreman out today and guess what? No rattle. It rattles everyday but today.

I hear a rattle (clicking noise) when I start the car and put it in gear.....it will stop when I put it in neutral or reverse. When I accelerate I can hear the noise, when I take my foot off the accelerator it stops. At least when I'm by myself it does. I have an automatic so it's not the shifter knob. I can hold or press the emergency brake release button and I still have the noise.

I've read and searched every post on this board, the SVT board, and the Bullitt board. All seem to say that they have the "infamous" dash rattle, but I've never quite determined the cure nor read about one other than the two above. I had a V-6 and didn't have it. Must be a V-8 symptom.

Guess I'll just have to do what some have suggested......just turn up the radio or get louder exhaust.......I love George Thorogood's "Bad To The Bone" at about the 10 marker on the volume while cruising 85 - 90 mph.

Any serious suggestions will be appreciated.

Big Ron
Big Ron is offline   Reply With Quote
Old 03-21-2006, 02:31 AM   #21
darkshadow mach
one lucky guy
 
darkshadow mach's Avatar
 
Join Date: Apr 2005
Location: Sugar Land, TX
Posts: 477
Re: In Dash Rattle

Quote:
Originally Posted by JohnnyMustang
got the rattle middle of dash by ac , its weird tho if i push on it while its making the noise it goes away but when i quit pushing on it it starts again, im trying the tape...nothing major just annoying i guess
That's what I have! Did the tape work? It always stops when I push on the center console just below the a/c vents but starts back up when I let off. I guess I can live with it. I'll just turn up the music louder!
darkshadow mach is offline   Reply With Quote
Old 03-21-2006, 01:29 PM   #22
Big Ron
Original 03 TR Owner
 
Big Ron's Avatar
 
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
Re: In Dash Rattle

Quote:
Originally Posted by darkshadow mach
That's what I have! Did the tape work? It always stops when I push on the center console just below the a/c vents but starts back up when I let off. I guess I can live with it. I'll just turn up the music louder!
I turned off my radio the other day......AC/DC rocks.......my dash rattle has disappeared......car will be three years old on April 7th

Big Ron
Big Ron is offline   Reply With Quote
Old 05-20-2007, 10:04 PM   #23
Bigal1067
Registered User
 
Bigal1067's Avatar
 
Join Date: Feb 2007
Location: Miami, Fl
Posts: 293
Re: In Dash Rattle

Quote:
Originally Posted by JohnnyMustang View Post
got the rattle middle of dash by ac , its weird tho if i push on it while its making the noise it goes away but when i quit pushing on it it starts again, im trying the tape...nothing major just annoying i guess
My 04 had the exact same rattle and the same thing... Just push on the center dash area it and it would go away. I used the tape and it worked like a charm.
Bigal1067 is offline   Reply With Quote
Old 02-18-2005, 08:52 PM   #24
rsdunphy
Registered User
 
rsdunphy's Avatar
 
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
Re: In Dash Rattle

nice attitude.... why did you buy one ...
__________________
Ex Owner:

2004 Azure Blue Mach 1
5 Speed
K&N Aircharger
Roush Stage 3 Suspension
Steeda Race Wing
Goodyear Eagle F1's, 255's Front, 315's Rear
MRT 10.5" Rear Bullits,9" Front Bullits
ROTORPRO's Slotted Rotors
Raised Shaker Hood 1/4 Inch
Build date 02/23/2004
rsdunphy is offline   Reply With Quote
Old 02-19-2005, 12:05 AM   #25
substanger
MachJunkie
 
substanger's Avatar
 
Join Date: Oct 2002
Location: KC area
Posts: 2,251
Re: In Dash Rattle

Quote:
Originally Posted by rsdunphy
nice attitude.... why did you buy one ...
For your info....not that I feel I need to give you any..... I've owned Mustangs since I was 17.....I'm 38 now. I've had everything from '69-'70 Machs, to a handful of Fox bodied, a couple of SN-95's and now my '03 Mach. I was just letting him know that rattles in Mustangs are nothing new AND for him to expect many more in his ownership. These aren't $50,000 Lincolns! : Oh, by the way. The TSB is listed on a "sticky" at the beginning of the "TSB and Warranty Item" topic page.
__________________
Past Mustang Ownership...'03 Mach 1 (Sold 11/07/06), '84 GT-5 speed-my first 'stang; '91 GT-5 speed; '70 M-code(351C) Mach 1; '95 Supercharged GT-S, 5 speed, totalled; '95 GT-S, 5 speed-replacement for totalled GT-S; '90 LX 5.0 5 speed; '89 LX 5.0 convertible 5 speed; '69 M-code(351W) Mach 1, 4 speed, A/C, fold down, slats, both spoilers; '90 LX 5.0 convertible.

Last edited by substanger; 02-20-2005 at 07:02 PM.
substanger is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<