Parting Out; Supercharged 03 Mach1 - 2003-04 Mach 1 Registry Owners Club

NEA · 08-15-2010, 11:30 PM

Parting out a 2003 Mach1 with 53k,5spd trans with IUP interior package and Vortech supercharger.

Engine w/V-2 vortech blower kit $old
5 spd trans $450.00
Stock 04 Gt 8.8 rearend complete with brakes $450.00
(Built 8.8 rearend in pics I'm keeping for another project)
17" Spare tire (donut) $90
Mach Seats (front) $old!
Rear Mach seats $old!
Billet console holder ring $old!
IUP Grey Stereo bezel $75
IUP Grey Shifter bezel w/billet ring & leather boot $95
Shaker hood & scoop w/bracket $old
1/4 glass & matching c-pillars $250 / Second set also available in DSG
Rear trunklid & spoiler $150
Rear bumper $old!
Side Scoops $old!
Rear Taillights $60
Front bumper w/foglights $175
Mach1 grill insert w/running horse & black backing plastic $60
interior carpet $75
Plus many other misc items.......

I'll post more items later today/tomorrow.

I have another set of 2004 Mach1 seats available with under 15k miles all in excl.condition
$800.00

jamg · 08-16-2010, 12:36 AM

How much for the center console shipped to NC ?

NEA · 08-16-2010, 01:12 PM

Quote:

Originally Posted by jamg

How much for the center console shipped to NC ?

Replied to ya on the other board.

04Mach1Blurr · 08-16-2010, 05:43 PM

Do you have the silver pedals for a manual?

NEA · 08-16-2010, 09:26 PM

Quote:

Originally Posted by 04Mach1Blurr

Do you have the silver pedals for a manual?

Yes,you looking for the entire pedals with mounting cage or just the pedal covers?

my305pony · 08-16-2010, 10:09 PM

need driverside fender and grille emblem. i can pick up most likely

marc813 · 08-17-2010, 02:39 PM

how much for that little vent on the dash on the drivers side? shipped to 32119

AzureblueMach · 08-19-2010, 12:19 AM

Willing to sell the complete 5-speed setup including the computer? Wanting to swap my auto mach to 5-speed.

NEA · 08-19-2010, 04:43 PM

Quote:

Originally Posted by my305pony

need driverside fender and grille emblem. i can pick up most likely

Driver fender $100,the grille emblem is staying with the front grille delete kit.

Quote:

Originally Posted by marc813

how much for that little vent on the dash on the drivers side? shipped to 32119

Pm sent

Quote:

Originally Posted by AzureblueMach

Willing to sell the complete 5-speed setup including the computer? Wanting to swap my auto mach to 5-speed.

Pm sent

Brown7 · 08-19-2010, 05:03 PM

how much for the Plastic center going from the middle vents to the shifter?

AzureblueMach · 08-19-2010, 06:13 PM

Back at ya NEA

vtecDIS · 09-29-2010, 08:12 PM

r u willing to sell just the vortech kit?

strikeeagle345 · 09-29-2010, 10:44 PM

i bought the motor and vortech off of him about a month ago.

elzuniga327 · 09-30-2010, 02:30 AM

its not on your list but just curious if you have an aftermarket catless midpipe on it that you want to sell?

oifdoc · 09-30-2010, 10:02 PM

let me know if you part out the motor. looking for the heads!

RobG · 10-21-2010, 05:21 PM

Quote:

Originally Posted by NEA

Parting out a 2003 Mach1 with 53k,5spd trans with IUP interior package and Vortech supercharger.

Engine w/V-2 vortech blower kit $3900
5 spd trans $450.00
Stock 04 Gt 8.8 rearend complete with brakes $450.00
(Built 8.8 rearend in pics I'm keeping for another project)
17" Spare tire (donut) $90
Mach Seats (front) $old!
Rear Mach seats $old!
Billet console holder ring $old!
IUP Grey Stereo bezel $75
IUP Grey Shifter bezel w/billet ring & leather boot $95
Shaker hood & scoop w/bracket $480
1/4 glass & matching c-pillars $250
Rear trunklid & spoiler $150
Rear bumper $180
Side Scoops $130
Rear Taillights $60
Front bumper w/foglights $200
Mach1 grill insert w/running horse & black backing plastic $60
Plus many other misc items.......

I'll post more items later today/tomorrow.

I see the hood is primered. What damage did is sustain?

cnelson14 · 10-23-2010, 12:13 AM

hey, would you happen to have to stock fuel hat? if so, how much shipped to 24127 thanks

strikeeagle345 · 10-24-2010, 05:20 AM

Quote:

Originally Posted by RobG

I see the hood is primered. What damage did is sustain?

i bought the motor, shaker, and hood from him back in sept. just letting you know so you are not waiting for an answer.

mach one NY · 10-25-2010, 07:29 PM

Do you have the 4 caliper cover circles that go to the front calipers?

NEA · 10-27-2010, 10:29 AM

Quote:

Originally Posted by RobG

I see the hood is primered. What damage did is sustain?

The hood in pics was a new replacement unpainted piece which has already sold.

Quote:

Originally Posted by cnelson14

hey, would you happen to have to stock fuel hat? if so, how much shipped to 24127 thanks

Yes,pm sent.

Quote:

Originally Posted by strikeeagle345

i bought the motor, shaker, and hood from him back in sept. just letting you know so you are not waiting for an answer.

Thanks for the response!

Quote:

Originally Posted by mach one NY

Do you have the 4 caliper cover circles that go to the front calipers?

Nope,they sold with the front brake kit.

blumnday99 · 10-27-2010, 01:46 PM

How much for the IUP bezel that goes around the stereo, the shifter boot / bezel, and the spoiler (without the trunk lid if possible)?

xtreme 2 · 10-27-2010, 06:51 PM

how are the shocks and struts? Shipped to 74055?

NEA · 10-27-2010, 06:59 PM

Quote:

Originally Posted by blumnday99

How much for the IUP bezel that goes around the stereo, the shifter boot / bezel, and the spoiler (without the trunk lid if possible)?

Pm sent!

Quote:

Originally Posted by xtreme 2

how are the shocks and struts? Shipped to 74055?

Shocks are both in excl.condition including one strut,the other front strunt is blown as it's really loose & easy to compress. If interested in the 3 just let me know.

xtreme 2 · 10-27-2010, 07:09 PM

how much?

RTGT Mach1 · 10-29-2010, 03:21 AM

Looking for driver's c-pillar without glass. How much shipped to 90604?

08-15-2010, 11:30 PM	#1
NEA Registered User Join Date: Feb 2004 Location: N.Indiana Posts: 203	Parting Out; Supercharged 03 Mach1 Parting out a 2003 Mach1 with 53k,5spd trans with IUP interior package and Vortech supercharger. Engine w/V-2 vortech blower kit $old 5 spd trans $450.00 Stock 04 Gt 8.8 rearend complete with brakes $450.00 (Built 8.8 rearend in pics I'm keeping for another project) 17" Spare tire (donut) $90 Mach Seats (front) $old! Rear Mach seats $old! Billet console holder ring $old! IUP Grey Stereo bezel $75 IUP Grey Shifter bezel w/billet ring & leather boot $95 Shaker hood & scoop w/bracket $old 1/4 glass & matching c-pillars $250 / Second set also available in DSG Rear trunklid & spoiler $150 Rear bumper $old! Side Scoops $old! Rear Taillights $60 Front bumper w/foglights $175 Mach1 grill insert w/running horse & black backing plastic $60 interior carpet $75 Plus many other misc items....... I'll post more items later today/tomorrow. I have another set of 2004 Mach1 seats available with under 15k miles all in excl.condition $800.00 Attached Thumbnails Last edited by NEA; 10-27-2010 at 07:04 PM.

08-16-2010, 12:36 AM	#2
jamg Registered User Join Date: Jan 2010 Location: NC Posts: 81	Re: Parting Out; Supercharged 03 Mach1 How much for the center console shipped to NC ?

08-16-2010, 05:43 PM	#4
04Mach1Blurr Machinator Join Date: Jul 2008 Location: Leesburg, VA Posts: 2,294	Re: Parting Out; Supercharged 03 Mach1 Do you have the silver pedals for a manual? __________________ 2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon

08-16-2010, 10:09 PM	#6
my305pony Registered User Join Date: Jul 2007 Location: Chicago Posts: 235	Re: Parting Out; Supercharged 03 Mach1 need driverside fender and grille emblem. i can pick up most likely __________________ 2003 DSG Mach 1 IUP Born:6/24/03 JLT RAI MGW ShortThrow Roy's 1/2" Spacer Steeda Subframe Connectors Magnaflow Catback KOOKS Headers KOOKS Catted X Eibach Pro-kit Springs Awaiting Install FRPP 4.10 Coming Soon UPR Chrome-Moly K-member MM Caster/Camber Plates Speed Inc/Bob Kurgan xcal2 Tune Eaton?? Twins??

08-17-2010, 02:39 PM	#7
marc813 Registered User Join Date: Feb 2009 Location: Daytona Beach, Fl Posts: 76	Re: Parting Out; Supercharged 03 Mach1 how much for that little vent on the dash on the drivers side? shipped to 32119 __________________ American Thunder 2 chamber exhaust, Pypes off road X-Pipe, JLT Ram Air Intake, SCT tune at Lamotta Performance, Moser 31 spline axles, 31 spline differental, FRPP 4:10 gears, Steeda Upper & Lower Control Arms, NGK Spark Plugs, 03-04 Cobra Mirrors, 18x9 & 18x10 Black Fr500s w/BFG KDWs, MGW Orange Handle Shifter, H&R Super Sport Springs, MM 4 Bolt CC Plates, Corbeau CR1 suede Seats 300 RWHP...318 Torque

08-19-2010, 12:19 AM	#8
AzureblueMach Registered User Join Date: Jun 2009 Location: Bowling Green, KY Posts: 377	Re: Parting Out; Supercharged 03 Mach1 Willing to sell the complete 5-speed setup including the computer? Wanting to swap my auto mach to 5-speed. __________________ 2003 Azure blue mach 1: JLT RAI, MGW orange handle shifter, BBK L/T headers, BBK off-road h-pipe, Borla stinger catback, Comp cams 106160's 18x9 and 18x10 Black 2010 GT-500 wheels, FMS 4.10 gears, FRPP "C" springs, and Maxim motorsports C/C plates. 352rwhp and 312rwtq

08-19-2010, 05:03 PM	#10
Brown7 Registered User Join Date: Nov 2008 Location: Abilene, Texas Posts: 778	Re: Parting Out; Supercharged 03 Mach1 how much for the Plastic center going from the middle vents to the shifter? __________________ 03' DSG Mach 1 - Sold 85' Silver Metalic SVO

08-19-2010, 06:13 PM	#11
AzureblueMach Registered User Join Date: Jun 2009 Location: Bowling Green, KY Posts: 377	Re: Parting Out; Supercharged 03 Mach1 Back at ya NEA __________________ 2003 Azure blue mach 1: JLT RAI, MGW orange handle shifter, BBK L/T headers, BBK off-road h-pipe, Borla stinger catback, Comp cams 106160's 18x9 and 18x10 Black 2010 GT-500 wheels, FMS 4.10 gears, FRPP "C" springs, and Maxim motorsports C/C plates. 352rwhp and 312rwtq

09-29-2010, 08:12 PM	#12
vtecDIS hunt'n for chevy's Join Date: May 2006 Location: Southern CA Posts: 660	Re: Parting Out; Supercharged 03 Mach1 r u willing to sell just the vortech kit? __________________ 2003 Torched Mach1, IUP, 5spd My Mach is for sale.. http://www.mach1registry.org/forums/...d.php?t=108311 2002 Trans Am WS6 M6. Sold but not forgotten

09-29-2010, 10:44 PM	#13
strikeeagle345 Registered User Join Date: May 2009 Location: naperville, il Posts: 5	Re: Parting Out; Supercharged 03 Mach1 i bought the motor and vortech off of him about a month ago.

09-30-2010, 02:30 AM	#14
elzuniga327 Registered User Join Date: Sep 2010 Location: phoenix, arizona Posts: 29	Re: Parting Out; Supercharged 03 Mach1 its not on your list but just curious if you have an aftermarket catless midpipe on it that you want to sell?

09-30-2010, 10:02 PM	#15
oifdoc Registered User Join Date: Aug 2010 Location: pembroke pines Posts: 116	Re: Parting Out; Supercharged 03 Mach1 let me know if you part out the motor. looking for the heads!

10-23-2010, 12:13 AM	#17
cnelson14 Registered User Join Date: May 2008 Location: Roanoke VA Posts: 31	Re: Parting Out; Supercharged 03 Mach1 hey, would you happen to have to stock fuel hat? if so, how much shipped to 24127 thanks

10-25-2010, 07:29 PM	#19
mach one NY FASTR THAN A SPDN BULLITT Join Date: Sep 2005 Location: New York ...'nuff said Posts: 540	Re: Parting Out; Supercharged 03 Mach1 Do you have the 4 caliper cover circles that go to the front calipers? __________________ ( I'm on the Highway To Hell . How come my GPS ain't working ?) "Thats not a BLOWER...Thats my WIFE !" OTHER CARS OF INTEREST: 1987 Ford Mustang GT SOLD 1985 Jeep CJ 7 Laredo STOLEN 1974 Chevy Nova SS SOLD 1964 Mercury Comet Caliente STOLEN I think there is a pattern here...

10-27-2010, 01:46 PM	#21
blumnday99 Registered User Join Date: Aug 2003 Location: Los Angeles, CA Posts: 445	Re: Parting Out; Supercharged 03 Mach1 How much for the IUP bezel that goes around the stereo, the shifter boot / bezel, and the spoiler (without the trunk lid if possible)? __________________ Forged 4.6 // Crower Stage 2 Cams // Melling High Performance Oil Pump // Procharger D1SC w/ 3-Core FMIC // Vortech Mondo BOV //Bassani Mid-Length Headers // Bassani High-Flow X-Pipe // Magnaflow Cat-Back 60 lb. Fuel Injectors // Cobra Tank w/ Dual Pumps + BAP MGW Shifter // McLeod RST KYB AGX Adjustable Struts // KYB Quad Shocks // Eibach Pro Kit // MAC Subframe Connectors / / Team Z Motorsports K-Member and A-Arms // Hotchkis CC Plate Tuned and Built by RET

10-27-2010, 06:51 PM	#22
xtreme 2 Registered User Join Date: Feb 2009 Location: Tulsa, OK Posts: 32	Re: Parting Out; Supercharged 03 Mach1 how are the shocks and struts? Shipped to 74055?

10-27-2010, 07:09 PM	#24
xtreme 2 Registered User Join Date: Feb 2009 Location: Tulsa, OK Posts: 32	Re: Parting Out; Supercharged 03 Mach1 how much?

10-29-2010, 03:21 AM	#25
RTGT Mach1 Registered User Join Date: Mar 2010 Location: Whittier, CA Posts: 38	Re: Parting Out; Supercharged 03 Mach1 Looking for driver's c-pillar without glass. How much shipped to 90604?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)