|
|
02-22-2014, 11:02 AM | #1 |
HOOAH!
Join Date: Sep 2013
Location: Fort, Gordon GA / JAX, FL
Posts: 173
|
Isos?
I want to remove my isos front and rear to lower the car a little without buying springs (mine are stock). Will i need camber plates to adjust the front alignment back to normal or can it be adjusted on the stock setup?
__________________
2003 DSG Mach 1. "MODS": JLT RAI, MAC cat-back, MGW Shifter, FRPP aluminum DS, Accel Super COP's, Chrome 18"x9" 00' Cobra R's, tinted rear side reflectors, tinted sequential tails w/ Raxiom modified flasher, led license lights, black reflective bumper insert letters, flame grille pony. |
02-23-2014, 03:39 PM | #2 |
Registered User
Join Date: Jan 2011
Location: swedesboro
Posts: 186
|
Re: Isos?
You will be fine. I lowered mine with eibach prokit, only about 1.5" and I didn't need anything to get correct geometry.
|
02-24-2014, 10:14 PM | #3 |
Registered User
Join Date: May 2010
Location: Ohio
Posts: 378
|
Re: Isos?
Its will be fine. You may hear it pop once in a while or rattle on bumps. Nothing bad though
__________________
Ben - 04 Mach 1 -Mac LT, LP o/r x, Mangaflow cb, K&N CAI, MMR 1/2" spacer, Custom cams, degreed ftw 356/339 12.04 @ 113.9 -Is it bench racing if the car hasnt ran in a year? |
02-25-2014, 01:30 AM | #4 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Isos?
I cut 1/2 coil out my front with the isos and it lowered it about 3/4", lot of post where people take out just top or bottom iso and all kinda combos, whatever works for you, I did not need any plates or anything with 1/2 coil, alignment stayed dead on. I will honk as I pass thru J-ville tomorrow and on the way back Wed. (Orlando for the day at LaMottas).
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
02-25-2014, 07:06 AM | #5 |
Registered User
Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
|
Re: Isos?
The stockers are probably smushed so flat that it won't make any difference and might be noisy w/o them.
__________________
2003 Azure mach1 5 speed with IUP Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there 2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s HPDE Instructor |
02-27-2014, 01:10 PM | #6 |
HOOAH!
Join Date: Sep 2013
Location: Fort, Gordon GA / JAX, FL
Posts: 173
|
Re: Isos?
Thanks for the help guys.
__________________
2003 DSG Mach 1. "MODS": JLT RAI, MAC cat-back, MGW Shifter, FRPP aluminum DS, Accel Super COP's, Chrome 18"x9" 00' Cobra R's, tinted rear side reflectors, tinted sequential tails w/ Raxiom modified flasher, led license lights, black reflective bumper insert letters, flame grille pony. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|