2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 10-21-2011, 12:49 AM   #26
SloSVO
Registered User
 
SloSVO's Avatar
 
Join Date: Oct 2010
Location: Arizona
Posts: 202
Re: Offical Nitrous numbers thread

Stock bottom end: YES

Nitrous Kit Brand Used: NX WET SHARK NOZZLE

Other Nitrous Add On's: HEATER AND PURGE

Nitrous Shot: 150 63N 33F

Where Does Nitrous Spray At: 4/5 INCHES IN FRONT OF TB

Fuel system: ONE GALLON STANDALONE WITH A 190LPH PUMP FOR OXIDE AND STOCK FOR MOTOR

Tuner/Dyno shop info: MYSELF AT EXTREME PERFORMANCE AZ

Other notable mods: 4.56 T56

RWHP/RWTQ: 4XX HP 536 TQ
SloSVO is offline   Reply With Quote
Old 10-21-2011, 03:30 PM   #27
03SHKR
used to be BrianWannaMach
 
03SHKR's Avatar
 
Join Date: Apr 2003
Location: Portland, OR
Posts: 1,468
Re: Offical Nitrous numbers thread

Before the motor rebuild (we'll see what it puts out after the new motor is done and tuned)....

Stock bottom end: YES

Nitrous Kit Brand Used: ZEX

Other Nitrous Add On's: BOTTLE HEATER, PURGE, DYNOJET WIDE BAND COMMANDER (WIDEBAND O2 AND WINDOW SWITCH)

Nitrous Shot: 100 SHOT

Where Does Nitrous Spray At: INTAKE ELBOW

Fuel system: STOCK

Tuner/Dyno shop info: FAST SPECIALTIES, VANCOUVER, WA

Other notable mods: MRT CATTED H-PIPE, BORLA STINGER CAT BACK, K&N, 3:90s, DUTCHMAN MOTORSPROTS REAR END, LOTS OF SUSPENSION WORK

RWHP/RWTQ: 321 RWHP/326 RWTQ w/o N2O; 371 RWHP/466 RWTQ on 100 SHOT
__________________
Brian
03 DSG Mach 1, 5-Spd, w/IUP VIN 387483, Mustang Dyno: 321 rwhp/326 rwtq; 371 rwhp/466 rwtq on 100 shot - old numbers, new numbers pending


- See pics of my first 86 SVO - I have two
- See pics of my 67 Mustang Fastback w/ 427 Small Block
- See pics of my 2003 Mach 1 Web Page, needs update for new motor, etc.
- See pics of my wife’s 06 Mustang
03SHKR is offline   Reply With Quote
Old 10-22-2011, 09:35 PM   #28
Fender
Registered User
 
Fender's Avatar
 
Join Date: May 2008
Location: El Paso , Tx
Posts: 118
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by punishermach View Post
on the motor i went 13.4 @102 to my best so far with a 1.89 60ft 12.21@112, i need to hook the car better and it should go into the 11s those runs were with 900psi
Stick or Auto?
If auto what stall on your converter (if you have a auto)?
__________________
- 2004 Mach 1 Automatic
- MAC H-pipe o/r, JLT intake, Flowmaster catback, 4.10 gears, RET Dyno Tune...
8.3 @ 85 Mph ... Irwindale Speedway
13.2 @ 106 Mph ... Auto Club Speedway
Fender is offline   Reply With Quote
Old 10-23-2011, 01:35 AM   #29
punishermach
Registered User
 
punishermach's Avatar
 
Join Date: Jul 2008
Location: Texas
Posts: 906
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by Fender View Post
Stick or Auto?
If auto what stall on your converter (if you have a auto)?
i have an auto, its a built trans from Darrin and a 3500 nitrous stall from him too
__________________
JLT, xpipe, tune and the Darrinmatic
and a lil bit of Sauce
tuned by Lethal Performance in San Antonio TX
punishermach is offline   Reply With Quote
Old 10-24-2011, 01:19 PM   #30
bigjohnsonDOHC
Registered User
 
bigjohnsonDOHC's Avatar
 
Join Date: Apr 2008
Location: Auburn, MA
Posts: 315
Re: Offical Nitrous numbers thread

Were those times before or after you got the rebuilt transmission and stall?
__________________
2003 Black Mach 1
-SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats
bigjohnsonDOHC is offline   Reply With Quote
Old 10-24-2011, 08:23 PM   #31
punishermach
Registered User
 
punishermach's Avatar
 
Join Date: Jul 2008
Location: Texas
Posts: 906
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by bigjohnsonDOHC View Post
Were those times before or after you got the rebuilt transmission and stall?
the bottom 12 runs were with the built trans and stall from Darrin
__________________
JLT, xpipe, tune and the Darrinmatic
and a lil bit of Sauce
tuned by Lethal Performance in San Antonio TX
punishermach is offline   Reply With Quote
Old 10-24-2011, 09:31 PM   #32
Roy
Registered User
 
Roy's Avatar
 
Join Date: Jul 2005
Location: S.E. Mich.
Posts: 3,446
Re: Offical Nitrous numbers thread

This was my last nitrous set up. My car is turbo charged now.



Stock bottom end: no

Nitrous Kit Brand Used: single nozzle dry system with Cold Fusion 400 hp solenoid, Wilson conical nozzle, -6 feed line.

Other Nitrous Add On's: heater and purge

Nitrous Shot: .092 jet

Where Does Nitrous Spray At: just before throttle body

Fuel system: two walbro 255 inlines and 80 pound injectors

Tuner/Dyno shop info: Lidio


RWHP/RWTQ: 628/670
Roy is offline   Reply With Quote
Old 10-25-2011, 01:18 PM   #33
bigjohnsonDOHC
Registered User
 
bigjohnsonDOHC's Avatar
 
Join Date: Apr 2008
Location: Auburn, MA
Posts: 315
Re: Offical Nitrous numbers thread

Stock bottom end: yes

Nitrous Kit Brand Used: Dynotune 125

Other Nitrous Add On's: dynotune progressive window switch, NGK TR6 plugs, AEM wideband, dynotune purge

Nitrous Shot: 125 wet

Where Does Nitrous Spray At: before tb

Fuel system: stock

Tuner/Dyno shop info: not tuned yet, will be by Pete @ Performance Dyno

Other notable mods: basic bolt ons

RWHP/RWTQ: no yet
__________________
2003 Black Mach 1
-SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats
bigjohnsonDOHC is offline   Reply With Quote
Old 10-30-2011, 10:24 PM   #34
systemdz
systemdz
 
systemdz's Avatar
 
Join Date: Mar 2010
Location: Murray, KY
Posts: 1,131
Stock bottom end: yes

Nitrous Kit Brand Used: NOS wet kit

Other Nitrous Add On's:NANO 4500psi comp kit, NX shark nozzle, HSW microedge programmer, purge through the shaker and SOS radio switch panel

Nitrous Shot: 150

Where Does Nitrous Spray At:nozzle on the elbow of K&N CAI

Fuel system: focus pump

Tuner/Dyno shop info: Speedydyno Owensboro KY

Other notable mods: exhaust, intake spacer, CAI, 4:30 w 28in ET streets

RWHP/RWTQ: 426rwhp, 480rwtq

11.65@124mph
__________________
2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO.
systemdz is offline   Reply With Quote
Old 11-19-2011, 12:03 PM   #35
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Offical Nitrous numbers thread

lol maybe they won't make it sticky because you misspelled "official".
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 11-19-2011, 03:37 PM   #36
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Offical Nitrous numbers thread

Added track results with the 100shot


Quote:
Originally Posted by ScreamingMach46 View Post
Guess I'll post my numbers up in this thread too...

Stock bottom end: YES

Nitrous Kit Brand: NX

Safety Features/Add-ons: Nitrous Outlet digital window switch/WOT switch, custom cupholder switch panel, NOS bottle heater, ZEX fuel rail adaptor

Nitrous/Fuel Jet Size and HP shot: Nitrous Jet-.052 / Fuel Jet-.033 -- 100shot

Fuel system: SVT Focus pump

Tuner/Tuned By: Xcal3 tuned by Tim Barth at Modular Powerhouse (93 octane & race gas tune)

Other notable mods: JLT intake, BBK LTs, BBK O/R x-pipe, Mac Catback

N/A RWHP/RWTQ: 307rwhp 328rwtq

Nitrous RWHP/RWTQ: 380rwhp 487rwtq (only 900psi)

N/A Track Times: 12.7 @ 107 (1.70)

Nitrous Track Times: 12.2 @ 110 (1.70)... exhaust came apart on that run causing the car to fall on it's face in 3rd and 4th gear.
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq

Last edited by ScreamingMach46; 04-24-2012 at 12:49 AM.
ScreamingMach46 is offline   Reply With Quote
Old 11-28-2011, 12:42 AM   #37
1993Lightning
04 Mach 1, 93 Lightning
 
1993Lightning's Avatar
 
Join Date: May 2008
Location: Bay St. Louis, Mississippi
Posts: 193
Re: Offical Nitrous numbers thread

Stock bottom end: YES

Nitrous Kit Brand Used: Dynotune dry shot

Other Nitrous Add On's: MSD digital switch window, Dynotune Lean cutout, AEM wideband

Nitrous Shot:125 flywheel

Where Does Nitrous Spray At: EGR block off plate tapped and threaded for the nozzle

Fuel system: Cobra injectors ,Fore fuel rails, -8AN feed, Ford GT pump, upgraded wiring for FPDM

Tuner/Dyno shop info: ModMafiaPerformance

Other notable mods: Full intake, full exhaust, 98 cobra cams.. 4.30 gears MT28/10.50R15 ET Drag

RWHP/RWTQ: Motor 349rwhp 330rwtq, Nitrous 440rwhp 440rwtq

Best ET on spray: 11.74@122 1.87 60foot, bogging real bad..
__________________
04 Mach 1
Best ET. 11.74@122(1.87) ..old setup
Don't fear the gear..
4v>LSx=2v>3v

Last edited by 1993Lightning; 09-08-2012 at 07:11 PM.
1993Lightning is offline   Reply With Quote
Old 11-28-2011, 03:31 AM   #38
626socalstang
Registered User
 
626socalstang's Avatar
 
Join Date: Nov 2011
Location: Arcadia, California
Posts: 452
Re: Offical Nitrous numbers thread

Stock bottom end: No

Nitrous Kit Brand Used: Zex Wet Kit

Other Nitrous Add On's: no

Nitrous Shot: 125

Where Does Nitrous Spray At: Purges out the shaker

Fuel system: Stock

Tuner/Dyno shop info: Dyno tuned at GRC Performance

Other notable mods: Jlt intake, Slp long tubes, high flow cats, slp xpipe, slp catbacks

RWHP/RWTQ: 412/475
__________________
-You just can't weld all your problems-
626socalstang is offline   Reply With Quote
Old 11-28-2011, 06:11 PM   #39
The AntiRice
Registered User
 
Join Date: May 2008
Location: Ft. Lewis, WA
Posts: 478
Re: Offical Nitrous numbers thread

Stock bottom end: yes

Nitrous Kit Brand Used: NX Wet

Other Nitrous Add On's: NX window switch, WOT safety switch, bottle heater, blah blah blah

Nitrous Shot: 100ish

Where Does Nitrous Spray At: elbow of K&N CAI

Fuel system: focus pump, Fore rails, fuel for nitrous taken before the rails (not from the shrader valve) courtesy of PSRs current M1M banned Wild Bill

Tuner/Dyno shop info: HP Ranch

Other notable mods: midpipe, side exhaust, intake spacer, CAI, 4.10s, electric water pump

RWHP/RWTQ: 402rwhp, 521rwtq

this was on a cold bottle spraying at 760 psi bottle pressure. mine ran out (stupid me) and i had to borrow a partially full cold bottle.

no track times yet
The AntiRice is offline   Reply With Quote
Old 11-28-2011, 06:35 PM   #40
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Offical Nitrous numbers thread

Number of bottles used and how long would be a big help in easing people's minds who are thinking about the jug
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 11-28-2011, 07:44 PM   #41
Stopsign32v
Registered User
 
Stopsign32v's Avatar
 
Join Date: Nov 2007
Location: Greenville, SC
Posts: 2,554
Re: Offical Nitrous numbers thread

I want to put the juice on my car so bad but I is scared to lol
__________________
03 white Mach1

JLT RAI | 1/2 spacer | Catback | 4.56s

7.76@87.8mph
Stopsign32v is offline   Reply With Quote
Old 11-28-2011, 08:42 PM   #42
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Offical Nitrous numbers thread

It's not dangerous if you have the necessary safety stuff. WOT switch, window switch, and fuel pressure safety switch. Also a A/F gauge and fuel pressure gauge are great to have. And I'd get a dyno tune for any shot.
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq
ScreamingMach46 is offline   Reply With Quote
Old 02-04-2012, 10:45 AM   #43
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by Stopsign32v View Post
I want to put the juice on my car so bad but I is scared to lol
I was running a zex wet kit on the stock motor till it went, then had the procharger and built motor on there and still had the zex kit hooked up to spray and they wanted me to do a 50-75shot (motor could handle it) but i just was to worried about sprayin, so ended up selling my zex kit

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 02-04-2012, 10:56 AM   #44
uscstew
Registered User
 
uscstew's Avatar
 
Join Date: Mar 2009
Location: Greer, SC
Posts: 420
Re: Offical Nitrous numbers thread

My previous set up

Stock bottom end: yes

Nitrous Kit Brand Used: nx

Other Nitrous Add On's: window switch, purge, and bottle heater

Nitrous Shot: 125

Where Does Nitrous Spray At: couple inches I front of the throttle body

Fuel system: stock except 1 gt pump

Tuner/Dyno shop info:

Other notable mods: 4.30 gears, tubular front end, off road h, cai, tune, and t56

RWHP/RWTQ: 430/500

Ran 7.0s with a best 7.003. Ran around 98mph with a best 100.5. Would have been in the 6s easy with exhaust
uscstew is offline   Reply With Quote
Old 02-04-2012, 01:50 PM   #45
03mach1
Admin/Founder
 
03mach1's Avatar
 
Join Date: Aug 2002
Location: Cuba, NY
Posts: 6,804
Re: Offical Nitrous numbers thread

Geesh Guys, the MODS on here (Including ME) probably don't have any Nitrous on our cars, so we dont' read this thread and probalby a lot of other threads, if we don't know about what you guys want, then we can't update it. A SIMPLE PM or EMAIL would have taken care of this much faster. I just recieved a PM from ASH to Sticky and I also combined the threads. Done.
__________________
David J. Wagner
Founder/Admin Member #0001
http://www.Mach1Registry.com
http://www.Mach1Performance.org
Amsoil T-1 Certified Independant Dealer
Member, MCA
'03 Mach 1, '08 V6 WIP, 76 Cobra II
VIN#301788
03mach1 is offline   Reply With Quote
Old 02-04-2012, 02:01 PM   #46
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by 03mach1 View Post
Geesh Guys, the MODS on here (Including ME) probably don't have any Nitrous on our cars, so we dont' read this thread and probalby a lot of other threads, if we don't know about what you guys want, then we can't update it. A SIMPLE PM or EMAIL would have taken care of this much faster. I just recieved a PM from ASH to Sticky and I also combined the threads. Done.
Thanks again

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 02-04-2012, 09:22 PM   #47
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Offical Nitrous numbers thread

Quote:
Originally Posted by 03mach1 View Post
Geesh Guys, the MODS on here (Including ME) probably don't have any Nitrous on our cars, so we dont' read this thread and probalby a lot of other threads, if we don't know about what you guys want, then we can't update it. A SIMPLE PM or EMAIL would have taken care of this much faster. I just recieved a PM from ASH to Sticky and I also combined the threads. Done.
Thank you!!! Thought I PM'd you months ago but no biggy.

Edit: PMd Jester on 10/13
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq
ScreamingMach46 is offline   Reply With Quote
Old 02-04-2012, 09:26 PM   #48
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Official Nitrous HP/TQ/mods thread

I'll be putting a built rear with 4.10s in in the next couple weeks. Can't wait for spring!!! Hope for some mid 11s on a 315/35/17 DR with the 100 shot.
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq
ScreamingMach46 is offline   Reply With Quote
Old 02-04-2012, 10:22 PM   #49
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Official Nitrous HP/TQ/mods thread

Quote:
Originally Posted by ScreamingMach46 View Post
I'll be putting a built rear with 4.10s in in the next couple weeks. Can't wait for spring!!! Hope for some mid 11s on a 315/35/17 DR with the 100 shot.
good luck on hitting some mid 11's, let us know what you run

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 04-14-2012, 07:22 PM   #50
BraggStang
Registered User
 
BraggStang's Avatar
 
Join Date: Jul 2011
Location: Fort Leonard Wood, MO
Posts: 158
Re: Official Nitrous HP/TQ/mods thread

Stock bottom end: YES

Nitours Kit Brand: ZEX wet

Safety Features/Add-ons: zex window switch,duel purge, bottle heater

Nitrous/Fuel Jet Size 125shot

Fuel system: stock fuel pump

Tuner/Tuned By: Wes, Sho-mespeed, dyno jet

Other notable mods: JLT RAI, Kooks LTHs, Kooks o/r X, Magnapacks catback, Aluminum DS, Moser 28 Spline Axles, Moser 4:10 gears

N/A RWHP/RWTQ: 314rwhp 321rwtq

Nitrous RWHP/RWTQ: 418rwhp 485rwtq

best 1/4 et pass: TBD

best 1/4 mph pass: TBD
__________________
ZEX Nitrous Kit 125 Wet Shot, Moser 4:10 gears, Aluminum Drive Shaft, Moser 28 Spline Axles, Kooks LTHs, Kooks o/r X-pipe, Summit Lowering Springs, JLT RAI, MGW Short Throw Shifter, Magnaflow Magnapacks Catbacks, Race Star Wheels 17x4.5 Front/15x10 Rear (275/50/15 MT ET Streets), NA and Nitrous Dyno NA: 314hp/320tq
Nitrous: 418hp/485tq
BraggStang is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:25 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<