2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 08-14-2012, 09:16 AM   #626
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

Ngk tr6 or part number ngk4177, gap them at .032 or if you have a feeler gauge it would work also. That's prob why your getting some sort of detonation.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 08-14-2012, 09:45 AM   #627
agentorangeCH
Registered User
 
Join Date: Jul 2012
Location: Sursee (CH)
Posts: 27
Re: Eaton Swap.....

I hope thats the problem, would pissing me off if its not that. Is that normal, that the eaton and the headers gets so hot in a very short time? I'd just started the engine again for about 3-5min.

Just tried whats happen when I disconnect the IAC. The idle starting to moving between 900-1300 rpms again. Is it possible that the new MAF and injectors cause this problem?

I also found some theards, where the harmonic balancer cause a wobbeling of the engine. I bought a brand new balancer.

Do someone know a good address where I can get a "safe" tune? The tuner I know seems to be on holiday at the moment.

Last edited by agentorangeCH; 08-14-2012 at 10:17 AM.
agentorangeCH is offline   Reply With Quote
Old 10-23-2012, 06:59 PM   #628
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

How come some of these blowers black and some gray ...??

http://www.ebay.com/itm/03-04-Mustan...8d625f&vxp=mtr
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 10-23-2012, 07:48 PM   #629
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

People paint them, they all came grey from the factory
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 10-24-2012, 03:19 PM   #630
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

I think it looks sweet!!

Has anyone painted their own ???
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 10-25-2012, 08:19 AM   #631
Ebrunott
Registered User
 
Ebrunott's Avatar
 
Join Date: Apr 2011
Location: Mooresville, NC
Posts: 63
Re: Eaton Swap.....

Okay, I have to ask you guys all this simple question. Realistically (parts, labor, etc.) how much does it cost to get your Mach Eaton swapped. I'm currently deployed and I'm looking at doing this for myself when I get back. Anyone that would be willing to help me scour parts/get connections to good parts would be greatly aappreciated. FURTHERMORE I will also likely be installing forged pistons and rods since my crank is already forged.

Thanks for all of your help, and anyone that can lend me some advice would be greatly appreciated. I don't know if i'll be able to scavage up all these parts on my own so I'll need some help. Thanks again guys!
Ebrunott is offline   Reply With Quote
Old 11-13-2012, 04:11 PM   #632
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

I am about to start buying some of this stuff... Is there a current price list? I dont want to overpay by a lot..

thanks
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 11-16-2012, 08:38 PM   #633
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

How are these prices?

03-04 Cobra Eaton supercharger- $450
03-04 Cobra Throttle body -$70
03-04 Cobra Plenum - $70
03-04 Cobra Twin fuel pumps - $125
03-04 Cobra Injectors - $125
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 11-18-2012, 06:52 PM   #634
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

ttt
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 11-18-2012, 06:54 PM   #635
04Mach1Blurr
Machinator
 
04Mach1Blurr's Avatar
 
Join Date: Jul 2008
Location: Leesburg, VA
Posts: 2,294
Re: Eaton Swap.....

Quote:
Originally Posted by mach18604 View Post
How are these prices?

03-04 Cobra Eaton supercharger- $350
03-04 Cobra Throttle body (same as Mach) -$70
03-04 Cobra Plenum - $70
03-04 Cobra Twin fuel pumps - $125
03-04 Cobra Injectors - $125
Not far off.
__________________
2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon
04Mach1Blurr is offline   Reply With Quote
Old 11-18-2012, 07:23 PM   #636
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

ok.. thanks
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 12-19-2012, 08:47 PM   #637
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

anyone have a 01 cobra front cover...?

Will it work ok once I do a swap?? Just wondering??

Thanks!
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 12-19-2012, 11:33 PM   #638
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Eaton Swap.....

IIRC, I had to trim the bottom of it because the heat exchanger was pushing down on it.
machgsxr is offline   Reply With Quote
Old 12-20-2012, 07:40 AM   #639
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

Quote:
Originally Posted by machgsxr View Post
IIRC, I had to trim the bottom of it because the heat exchanger was pushing down on it.
Yep...has to get trimmed but it's not too much
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 12-20-2012, 11:16 PM   #640
t.dilts
Registered User
 
t.dilts's Avatar
 
Join Date: Sep 2012
Location: Columbia, MO
Posts: 4
Re: Eaton Swap.....

Hey guys! I'm new to the site, this is the first I've really used it for anything anyway.. So, I bought an 03' Mach a few months back, and the other day at work (I'm a tech for a local dealer, Benz though, not Ford) I had the opportunity to drive a Roush charged 08' GT we took in on trade, and it was the first supercharged Mustang I've actually had the chance to drive. Let's just say between the noticeable power difference and the whine, I was sold. So I started researching about twin screw blowers since all I could find were centrifugal kits for the Mach, and it led me here. I spent the last 3 days reading every post on this forum in my free time, lol! So I was wondering, when it comes to sourcing used parts, what do you guys recommend, or I should say, where do you recommend I look? Ebay? I searched "cobra supercharger" and got a few of the blowers themselves and a couple lower intakes, ect. But are there more sources I could search through to find everything I could get used for a decent price? Thanks! This thread is great btw! Honestly entertaining to read through!
t.dilts is offline   Reply With Quote
Old 12-20-2012, 11:23 PM   #641
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

There's usually a few parts around this forum, but your best to find most of thr parts on svtp (svtperformance.com) look in the market section, 03/04 cobra parts.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 12-20-2012, 11:26 PM   #642
t.dilts
Registered User
 
t.dilts's Avatar
 
Join Date: Sep 2012
Location: Columbia, MO
Posts: 4
Re: Eaton Swap.....

Quote:
Originally Posted by SHAKN' 04 View Post
There's usually a few parts around this forum, but your best to find most of thr parts on svtp (svtperformance.com) look in the market section, 03/04 cobra parts.
I kept seeing SVTP throughout the thread and wondering what you guys were talking about.. Alright great! Thanks! I'll check it out!
t.dilts is offline   Reply With Quote
Old 12-20-2012, 11:30 PM   #643
Kove
Registered User
 
Kove's Avatar
 
Join Date: Dec 2009
Location: Fort Campbell, KY
Posts: 365
Quote:
Originally Posted by mach18604 View Post
anyone have a 01 cobra front cover...?

Will it work ok once I do a swap?? Just wondering??

Thanks!
Are you saying a '01 Cobra bumper cover? I've got a '01 Cobra bumper cover on mine and I didn't have to do any trimming. That's with a stock Cobra H/E though.
Kove is offline   Reply With Quote
Old 12-20-2012, 11:35 PM   #644
Kove
Registered User
 
Kove's Avatar
 
Join Date: Dec 2009
Location: Fort Campbell, KY
Posts: 365
Quote:
Originally Posted by t.dilts View Post
Hey guys! I'm new to the site, this is the first I've really used it for anything anyway.. So, I bought an 03' Mach a few months back, and the other day at work (I'm a tech for a local dealer, Benz though, not Ford) I had the opportunity to drive a Roush charged 08' GT we took in on trade, and it was the first supercharged Mustang I've actually had the chance to drive. Let's just say between the noticeable power difference and the whine, I was sold. So I started researching about twin screw blowers since all I could find were centrifugal kits for the Mach, and it led me here. I spent the last 3 days reading every post on this forum in my free time, lol! So I was wondering, when it comes to sourcing used parts, what do you guys recommend, or I should say, where do you recommend I look? Ebay? I searched "cobra supercharger" and got a few of the blowers themselves and a couple lower intakes, ect. But are there more sources I could search through to find everything I could get used for a decent price? Thanks! This thread is great btw! Honestly entertaining to read through!
If you find a Eaton swap kit that's somewhat complete, that's the most cost efficient means of doing the swap. To buy all the parts individually would be ridiculously expensive and probably not worth it. Eaton swap kits usually pop up on here and SVTP quite often, just watch the forums.
Kove is offline   Reply With Quote
Old 12-21-2012, 01:13 AM   #645
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

Quote:
Originally Posted by Kove View Post
If you find a Eaton swap kit that's somewhat complete, that's the most cost efficient means of doing the swap. To buy all the parts individually would be ridiculously expensive and probably not worth it. Eaton swap kits usually pop up on here and SVTP quite often, just watch the forums.

Not quite, as I bought all my parts (separate used/new) $2100
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 12-21-2012, 08:28 AM   #646
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Eaton Swap.....

I paid about 3k for mine, but I ended up with like 2 kits and sold the other one off for the complete price and got mine for about the price of a tune...

THat was buying all hte parts seperately.
machgsxr is offline   Reply With Quote
Old 12-21-2012, 02:08 PM   #647
Flash88
Registered User
 
Join Date: Jul 2011
Location: jacksonville
Posts: 664
Re: Eaton Swap.....

i got my whole swap for $1000 + my N/A parts.

friend turbo'd his Cobra and needed my intake, timing cover, etc.
__________________
___________________________
70mm single turbo.
Flash88 is offline   Reply With Quote
Old 12-21-2012, 02:44 PM   #648
Kove
Registered User
 
Kove's Avatar
 
Join Date: Dec 2009
Location: Fort Campbell, KY
Posts: 365
I guess I wasn't looking in the right places then.
Kove is offline   Reply With Quote
Old 12-21-2012, 10:04 PM   #649
mach18604
Registered User
 
mach18604's Avatar
 
Join Date: Nov 2005
Location: Lyndhurst, Ohio
Posts: 2,287
Re: Eaton Swap.....

Quote:
Originally Posted by Kove View Post
Are you saying a '01 Cobra bumper cover? I've got a '01 Cobra bumper cover on mine and I didn't have to do any trimming. That's with a stock Cobra H/E though.
yes.. thanks!
__________________
Collecting for an Eaton Swap down the road..
mach18604 is offline   Reply With Quote
Old 01-26-2013, 02:42 PM   #650
bleedingfordblu
Registered User
 
bleedingfordblu's Avatar
 
Join Date: May 2007
Location: Leesburg, VA
Posts: 1,985
Re: Eaton Swap.....

i would just like to say F the cam cover gaskets. pain in my ***
__________________
2003 Azure Blue Mach 1

Stock bottom end/compression
Eaton M112
Stock upper
Stock lower
K&N intake
Built T56
Bassani mid length headers
Bassani catted x pipe
Bassani slash cut tip catback
Stock 03 Cobra IRS
18x9/10 Forgestar F14
Tuned by Chris Macduff at IMA motorsports
429hp 407 tq @ 7.5 lbs of boost
bleedingfordblu is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<