VT: 2003 Ford Mustang Mach 1 Supercharged - 2003-04 Mach 1 Registry Owners Club

VT4CAM · 06-27-2011, 04:30 PM

Sold please delete

Mach828 · 06-27-2011, 07:11 PM

$17.5!!! You can buy a termi for that.

VT4CAM · 06-28-2011, 04:25 PM

Quote:

Originally Posted by Mach828

$17.5!!! You can buy a termi for that.

Well then what do you think it is worth!?

chad3113 · 06-28-2011, 11:29 PM

498 rwhp on a stock block?

VT4CAM · 06-29-2011, 04:35 PM

Yes, the programmer has a lower hp tune too. That was just the max it put down on the dyno. I've put like 1000 miles on it since it was supercharged and all of them have been on the safe tune.

Evn62719 · 06-29-2011, 05:34 PM

Quote:

Originally Posted by Mach828

$17.5!!! You can buy a termi for that.

So what if you can? If you do it's probably a salvage title or over 100k miles. He didn't ask your opinion on what other cars you can buy for his asking price. Seller, keep your price where its at, I think it is a fair starting price.

Unrealford · 06-29-2011, 06:29 PM

Quote:

Originally Posted by Mach828

$17.5!!! You can buy a termi for that.

I think its a fair starting price. If you havent noticed, our trade in values along with all used cars went up in value, Within the last 12 months My Mach1 went from 10,000 trade in value to over 14,500..
Dealers are selling, Not asking, Mach1s for over 17 here, with 30k plus miles.

Mach828 · 06-29-2011, 07:22 PM

If you say so. But the book value is also showing $14k for a regular new edge GT. When I've seen people struggling to sell them for $10k.

I personally wouldn't spend over $13k for a Mach unless it had 10,000 miles on it.

I got mine for $11k with 50k miles.

I could pick up a nice termi for $17 cash easy. My buddy bought a Mach with a built fresh engine, AFS DD, all bolt on's, Vortech SC, 30k miles, for $10k.

Go to the dealer and see if they will give you $14k as a trade in, and get a good deal on a new 5.0, just for fun. I bet they offer you $10k, or $14 and full retail with no discount on the 5.0.

___

Book value and market value are an entirely different thing.

Mach828 · 06-29-2011, 07:30 PM

If you want to determine market value, check ebay completed listings for an 03-04 Mach 1. You will see none for $17k and 80k miles. For $17k I found one with 700 miles that sold, and over 50k miles people stopped bidding at $12k.

VT4CAM · 06-29-2011, 08:04 PM

Quote:

Originally Posted by Unrealford

I think its a fair starting price. If you havent noticed, our trade in values along with all used cars went up in value, Within the last 12 months My Mach1 went from 10,000 trade in value to over 14,500..
Dealers are selling, Not asking, Mach1s for over 17 here, with 30k plus miles.

Thanks guys, I think it is a fair place to start considering the condition of the car and what is done.

Apollo240 · 06-30-2011, 09:23 PM

Did you happen to buy this car in MD?

VT4CAM · 07-02-2011, 01:09 PM

Quote:

Originally Posted by Apollo240

Did you happen to buy this car in MD?

Yes I did

Apollo240 · 07-03-2011, 12:02 AM

Holy ****! I cant believe id ever see this car again! Especially with a blower!

SICMACH1 · 07-15-2011, 11:19 AM

You must not really kick into this car I made 497 with my d1 backed it off to 475 and it lasted bout 5months I put bout 3k on it and I now have a slight rod knock lol

Larry Warcup · 07-15-2011, 03:03 PM

440 - 450 rwhp is about all these stock blocks will take for any length of time.

And I think you should keep your price right where it is...the market value
of your car is whatever you can sell it for...good luck with the sale!

Unrealford · 08-02-2011, 02:55 PM

Are you purchasing a new car? Reason I ask is because dealers are even offering good money for trade in right now. They offered me 17k for mine with 20,500 miles.

VT4CAM · 08-03-2011, 10:46 PM

Quote:

Originally Posted by Unrealford

Are you purchasing a new car? Reason I ask is because dealers are even offering good money for trade in right now. They offered me 17k for mine with 20,500 miles.

No, no new car for me, my job has changed and I am traveling a lot more so I bought a car that is a little bigger.

VT4CAM · 08-05-2011, 01:28 PM

to the top.

VT4CAM · 08-07-2011, 05:40 PM

price drop

VT4CAM · 08-17-2011, 02:13 PM

make me an offer!

nitmare · 08-17-2011, 02:29 PM

sometimes it takes a little while to get a bite.. I wouldnt drop your price any more or your selling yourself short.. Dealer prices should not be involved in the conversation unless you going to actually trade it in er get ripped OFF... GOOD LUCK !!!

VT4CAM · 08-18-2011, 07:42 PM

Quote:

Originally Posted by nitmare

sometimes it takes a little while to get a bite.. I wouldnt drop your price any more or your selling yourself short.. Dealer prices should not be involved in the conversation unless you going to actually trade it in er get ripped OFF... GOOD LUCK !!!

Thanks!

VT4CAM · 08-21-2011, 05:37 PM

to the top

VT4CAM · 08-27-2011, 10:44 AM

to the top

VT4CAM · 08-28-2011, 02:26 PM

Make me an offer

06-27-2011, 04:30 PM	#1
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Delete Sold please delete Last edited by VT4CAM; 09-22-2011 at 09:58 AM. Reason: Price in title

06-27-2011, 07:11 PM	#2
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: VT: 2003 Ford Mustang Mach 1 Supercharged $17.5!!! You can buy a termi for that. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

06-28-2011, 11:29 PM	#4
chad3113 Registered User Join Date: Dec 2007 Location: Baton Rouge, LA Posts: 116	Re: VT: 2003 Ford Mustang Mach 1 Supercharged 498 rwhp on a stock block?

06-29-2011, 04:35 PM	#5
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged Yes, the programmer has a lower hp tune too. That was just the max it put down on the dyno. I've put like 1000 miles on it since it was supercharged and all of them have been on the safe tune.

06-29-2011, 07:22 PM	#8
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: VT: 2003 Ford Mustang Mach 1 Supercharged If you say so. But the book value is also showing $14k for a regular new edge GT. When I've seen people struggling to sell them for $10k. I personally wouldn't spend over $13k for a Mach unless it had 10,000 miles on it. I got mine for $11k with 50k miles. I could pick up a nice termi for $17 cash easy. My buddy bought a Mach with a built fresh engine, AFS DD, all bolt on's, Vortech SC, 30k miles, for $10k. Go to the dealer and see if they will give you $14k as a trade in, and get a good deal on a new 5.0, just for fun. I bet they offer you $10k, or $14 and full retail with no discount on the 5.0. ___ Book value and market value are an entirely different thing. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

06-29-2011, 07:30 PM	#9
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: VT: 2003 Ford Mustang Mach 1 Supercharged If you want to determine market value, check ebay completed listings for an 03-04 Mach 1. You will see none for $17k and 80k miles. For $17k I found one with 700 miles that sold, and over 50k miles people stopped bidding at $12k. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

06-30-2011, 09:23 PM	#11
Apollo240 12's Join Date: Oct 2006 Location: In front of SparksMach1, MD Posts: 1,655	Re: VT: 2003 Ford Mustang Mach 1 Supercharged Did you happen to buy this car in MD? __________________ Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette

07-03-2011, 12:02 AM	#13
Apollo240 12's Join Date: Oct 2006 Location: In front of SparksMach1, MD Posts: 1,655	Re: VT: 2003 Ford Mustang Mach 1 Supercharged Holy ****! I cant believe id ever see this car again! Especially with a blower! __________________ Old Mach: 2003 Torch Red, IUP, Flowmaster Cat-back, Steeda Tri Ax, Predator, JLT RAI, PHP spacer, BBK long tubes, BBK O/R H, Accufab 307/318 Current: Ls1 Corvette

07-15-2011, 11:19 AM	#14
SICMACH1 Registered User Join Date: Apr 2010 Location: Front Royal, VA Posts: 130	Re: VT: 2003 Ford Mustang Mach 1 Supercharged You must not really kick into this car I made 497 with my d1 backed it off to 475 and it lasted bout 5months I put bout 3k on it and I now have a slight rod knock lol __________________ 2003 Azure Blue Mach

07-15-2011, 03:03 PM	#15
Larry Warcup WEST COAST MACH1 Join Date: Nov 2006 Location: Vancouver, BC, Canada Posts: 325	Re: VT: 2003 Ford Mustang Mach 1 Supercharged *440 - 450 rwhp* is about all these stock blocks will take for any length of time. And I think you should keep your price right where it is...the market value of your car is whatever you can sell it for...good luck with the sale! __________________ *LARRY* *WARCUPRACING.com* MY '03 MACH1 PICS & INFO *Mach 1 REGISTRY* PICS MUSTANG CLUB of AMERICA MEMBER PHOTO GALLERY

08-02-2011, 02:55 PM	#16
Unrealford Mustang owner since 1984 Join Date: Sep 2003 Location: Buffalo, NY Posts: 4,515	Re: VT: 2003 Ford Mustang Mach 1 Supercharged Are you purchasing a new car? Reason I ask is because dealers are even offering good money for trade in right now. They offered me 17k for mine with 20,500 miles. __________________ 2012 Kona Blue Metallic BOSS MOMS Racing... 11.92@115.43 stock besides drag radials http://www.dragzine.com/news/moms-ra...2013-schedule/

08-05-2011, 01:28 PM	#18
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged to the top.

08-07-2011, 05:40 PM	#19
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged price drop

08-17-2011, 02:13 PM	#20
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged make me an offer!

08-17-2011, 02:29 PM	#21
nitmare nitmare Join Date: Oct 2006 Location: Tampa,Florida Posts: 366	Re: VT: 2003 Ford Mustang Mach 1 Supercharged sometimes it takes a little while to get a bite.. I wouldnt drop your price any more or your selling yourself short.. Dealer prices should not be involved in the conversation unless you going to actually trade it in er get ripped OFF... GOOD LUCK !!! __________________ 03 DSG JLT cai,Custom tune, MGW shifter, Aluminum drive shaft, Pypes x w/High flow magnaflow cats and mac cat back. AFS DD replicas 17x10.5 with 315s and 17x 9 with 275 front. Eibach pro's with urethane Isos, Bilstein struts/shocks, some MM suspension Pieces.

08-21-2011, 05:37 PM	#23
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged to the top

08-27-2011, 10:44 AM	#24
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged to the top

08-28-2011, 02:26 PM	#25
VT4CAM Registered User Join Date: Oct 2010 Location: Colchester,VT Posts: 31	Re: VT: 2003 Ford Mustang Mach 1 Supercharged Make me an offer

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)