|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Body, Chassis & Interior Body, Chassis and Interior mods/discussions |
|
Thread Tools | Display Modes |
03-08-2018, 02:27 PM | #1 |
Registered User
Join Date: Jan 2018
Location: Central Kentucky
Posts: 161
|
Can't unlock door with key
I tried to unlock the driver side door with the key and it wouldn't work. Then I noticed that the lock (tumbler) seems to be loose in the door. It wiggles around quite a bit.
If I pull the door panel off, can I tighten this up and make it work? Or is it likely time for a new tumbler? And, if I replace the tumbler, I'll have to get a new key cut and programmed for the car too, won't I?
__________________
2003 Mach 1 - TR3650 - Mac O/R H-pipe - Ford Racing driveshaft - Modified air intake - Nitto Motivo 315/35s on 10.5" FR500 wheels - Steeda clutch adjuster |
03-09-2018, 12:41 PM | #2 |
Registered User
Join Date: Mar 2011
Location: Fort Worth, TX
Posts: 209
|
Re: Can't unlock door with key
The tumbler is held in place with a single clip. Its possible that clip broke and that is why the tumbler is loose. Pull the door panel and check. As far as a new tumbler goes, they are usually sold with a blank setting that will set using your stock key.
|
03-09-2018, 08:42 PM | #3 |
Registered User
Join Date: Jan 2018
Location: Central Kentucky
Posts: 161
|
Re: Can't unlock door with key
Ok thanks.
__________________
2003 Mach 1 - TR3650 - Mac O/R H-pipe - Ford Racing driveshaft - Modified air intake - Nitto Motivo 315/35s on 10.5" FR500 wheels - Steeda clutch adjuster |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|