Dawg VS. Dan03Mach Race Date.. - Page 3 - 2003-04 Mach 1 Registry Owners Club

Dan03mach · 08-04-2005, 10:56 PM

Quote:

Originally Posted by Brain

I've managed a 7.744@88.75. I have the stripped car but it is also only 286-hp.

Greenville Ford is fixing my tranny, so I might be able to join you guys.

I think you need to go to HPP and get that car redyno'd and stop bsing everone about your hp.. I saw the sheet but I bet there is more in it now..

lisaz28 · 08-05-2005, 10:55 AM

Quote:

Originally Posted by Brain

I've managed a 7.744@88.75. I have the stripped car but it is also only 286-hp.

Greenville Ford is fixing my tranny, so I might be able to join you guys.

It would be good to have another local GTG. I'll bring my camera.

Jim H. · 08-05-2005, 02:03 PM

Quote:

Originally Posted by LUCKYMACH

But............can ya cut a light? :LAUGH:

I can. And if you're real careful you won't even get any shards of glass in your fingers either.

Tomcat427 · 08-05-2005, 04:41 PM

Quote:

Originally Posted by Jim H.

I can. And if you're real careful you won't even get any shards of glass in your fingers either.

Back to the subject. I can red light on a Pro tree, so there!

Dan03mach · 08-05-2005, 04:54 PM

Well the time has change to 1-6 not 2-8... That is what was said on DFWstangs so I guess that is when it is...

Jim H. · 08-05-2005, 05:17 PM

Quote:

Originally Posted by Tomcat427

Back to the subject. I can red light on a Pro tree, so there!

Oh was that a "racing" term? Gosh I need to learn some of those.

Tomcat427 · 08-05-2005, 06:52 PM

Quote:

Originally Posted by Jim H.

Oh was that a "racing" term? Gosh I need to learn some of those.

Why?

As fast as you are, people can be racing you and you will never know (or see them).

Jester · 08-05-2005, 07:30 PM

Quote:

Originally Posted by Jim H.

I can. And if you're real careful you won't even get any shards of glass in your fingers either.

I knew you weren't talking about racing, Jim

.

Jim H. · 08-05-2005, 10:42 PM

Quote:

Originally Posted by Tomcat427

Why?

As fast as you are, people can be racing you and you will never know (or see them).

Only on the streets of Seguin. :LAUGH:

Jim H. · 08-05-2005, 10:45 PM

Quote:

Originally Posted by Jester

I knew you weren't talking about racing, Jim

.

Somebody out there understands me? Nah there's no way.

Dan03mach · 08-09-2005, 06:00 PM

I almost can't wait till this race.. This event is going to be pretty fun so I hope that most of you guys can make it out there on the 28th.. Don't forget your camera's either, because I am going to try to pull the front wheels off the ground.. Some people might think yeah what ever, well just come out and watch then.. I am shooting for a 7.75 or better up there... Which I know I can do..

Tomcat427 · 08-09-2005, 06:34 PM

Quote:

Originally Posted by Dan03mach

I almost can't wait till this race.. This event is going to be pretty fun so I hope that most of you guys can make it out there on the 28th.. Don't forget your camera's either, because I am going to try to pull the front wheels off the ground.. Some people might think yeah what ever, well just come out and watch then.. I am shooting for a 7.75 or better up there... Which I know I can do..

I am so glad it was switched to the 28th. Should be fun, just have to figure out how to keep the dfwstangs guys away from my daughter, lol.

Jim H. · 08-09-2005, 08:06 PM

Quote:

Originally Posted by Tomcat427

I am so glad it was switched to the 28th. Should be fun, just have to figure out how to keep the dfwstangs guys away from my daughter, lol.

Well I do rent out assualt weapons for any event.

Tomcat427 · 08-09-2005, 11:12 PM

Quote:

Originally Posted by Jim H.

Well I do rent out assualt weapons for any event.

I'll be sure and tell her.

TheBlkMach1 · 08-09-2005, 11:41 PM

I can't believe this race still hasn't happened!!!

How long has it been? I guess i'm still going with Dan though.

Sorry Dawg!

I wanna see a vid though. Someone has to vid this and host it.

Tomcat427 · 08-09-2005, 11:49 PM

Well, I think when they started this they were battling for the #3 and #4 spot in the Dallas - Fort Worth area. Now I don't think they are even in the top ten.

Yes, I still respect them n/a (OK, Lisa

).

Dawg · 08-10-2005, 01:11 AM

Well, I really want this race to happen too, especially since I was running faster than Dan 2 weeks ago but I'm going to have to hold off for a while.

My wife was laid off a few months ago and a job she had lined up fell through so she's now looking for another one. This means money is going to be tight for a while and depending on what she does find it might be longer than I would like. How my luck has been lately, I figure if I do race I'll prolly bust the tranny or clutch and not have the $$ to fix it so no more racing for me until our situation changes for the better.

Oh well, it's all about priorities...

Dan you can claim the bragging rights for now.

Dan03mach · 08-10-2005, 06:28 AM

Quote:

Originally Posted by Mach1Marauder

Want me to spank him for ya?

Hell Yeah Bill, come on out, I think it will be a good run between the 2 of us N/A of corse.. BTW those other parts will be hear Friday.. And I'm taking it to my buddy Jason's shop on Tuesday to have them installed..

Dan03mach · 08-10-2005, 06:34 AM

Sorry to hear about your wife loosing her job Patrick.. By the way I went out to Dale last Thursday and I was running low 7.8's at 87.5mph with by best of 1.649 60fts.. And I was doing that with a bad rear lower control arm.. I found out that my bushing is pretty much split in half and hanging out a little and the end of the control arm has a chunck taken out of it from where it hit the bolt that holds on the bottom of the shock.. So I ordered UPR double adjustable uppers and single adjustable lowers, with KYB AGX adjustable shocks... Pretty much the exact same rear suspesion set up as Bill has.. I wasn't going to tell you but since you aren't going to run anymore it doesn't matter anymore...

Brain · 08-10-2005, 09:14 AM

Quote:

Originally Posted by Dan03mach

Don't forget your camera's either, because I am going to try to pull the front wheels off the ground..

Been there. Done that.

lisaz28 · 08-10-2005, 10:11 AM

Quote:

Originally Posted by Dawg

Well, I really want this race to happen too, especially since I was running faster than Dan 2 weeks ago but I'm going to have to hold off for a while.

My wife was laid off a few months ago and a job she had lined up fell through so she's now looking for another one. This means money is going to be tight for a while and depending on what she does find it might be longer than I would like. How my luck has been lately, I figure if I do race I'll prolly bust the tranny or clutch and not have the $$ to fix it so no more racing for me until our situation changes for the better.

Oh well, it's all about priorities...

Dan you can claim the bragging rights for now.

Sorry to hear about your wife's job Patrick. Hope everything works out for you. I have some awesome job websites if you're interested. I used them when I was trying to find Lucky a full-time job which finally happened! Woo hoo!

Seems like everyone's luck has pretty much been crummy this year!

Dan03mach · 08-10-2005, 10:52 AM

Quote:

Originally Posted by Brain

Been there. Done that.

Well since Dawg can't make it how about You and I run Brian... Battle of the DSG's, are you going to have your car fixed by then.. If so I'm calling you out..

Mach 1 Fanatic · 08-10-2005, 10:53 AM

Quote:

Originally Posted by Brain

Been there. Done that.

Hey Brian--I think I have a pretty good picture of you doing exactly that..when we were all at K-Dale. PM me your email address and I'll send it to you.
Ginny

Jim H. · 08-10-2005, 01:41 PM

Quote:

Originally Posted by Dan03mach

Well since Dawg can't make it how about You and I run Brian... Battle of the DSG's, are you going to have your car fixed by then.. If so I'm calling you out..

WHAT!

Is this one of those Twilight Zone posts? :LAUGH:

Dan03mach · 08-10-2005, 02:38 PM

Quote:

Originally Posted by Jim H.

WHAT!

Is this one of those Twilight Zone posts? :LAUGH:

Well the last time we raced I kinda handed it to him.. So he has wanted to run since and we never have.. I think he wants a rematch but is he up to it, now that is the question at hand????

08-05-2005, 04:54 PM	#55
Dan03mach Spool'n UP Join Date: Nov 2003 Location: DFW TX Posts: 3,952	Re: Dawg VS. Dan03Mach Race Date.. Well the time has change to 1-6 not 2-8... That is what was said on DFWstangs so I guess that is when it is... __________________ 03 Dark Shadow Grey Mach1 "SMOKEY" *"SLOW STREET CAR"* Mods: Turbocharged 9 Sec. Slow Street Car

08-09-2005, 06:00 PM	#61
Dan03mach Spool'n UP Join Date: Nov 2003 Location: DFW TX Posts: 3,952	Re: Dawg VS. Dan03Mach Race Date.. I almost can't wait till this race.. This event is going to be pretty fun so I hope that most of you guys can make it out there on the 28th.. Don't forget your camera's either, because I am going to try to pull the front wheels off the ground.. Some people might think yeah what ever, well just come out and watch then.. I am shooting for a 7.75 or better up there... Which I know I can do.. __________________ 03 Dark Shadow Grey Mach1 "SMOKEY" *"SLOW STREET CAR"* Mods: Turbocharged 9 Sec. Slow Street Car

08-09-2005, 11:41 PM	#65
TheBlkMach1 Cobra killer. Join Date: Jul 2004 Location: west palm beach, FL Posts: 2,526	Re: Dawg VS. Dan03Mach Race Date.. I can't believe this race still hasn't happened!!! How long has it been? I guess i'm still going with Dan though. Sorry Dawg! I wanna see a vid though. Someone has to vid this and host it. __________________ Need2speeD.com

08-09-2005, 11:49 PM	#66
Tomcat427 What a ride it was :) Join Date: Aug 2002 Location: TX Posts: 4,489	Re: Dawg VS. Dan03Mach Race Date.. Well, I think when they started this they were battling for the #3 and #4 spot in the Dallas - Fort Worth area. Now I don't think they are even in the top ten. Yes, I still respect them n/a (OK, Lisa ). __________________ No, I didn't do that! Wait maybe I did!

08-10-2005, 01:11 AM	#67
Dawg Marking My Territory!!! Join Date: Mar 2004 Location: Highland Village, TX Posts: 1,590	Re: Dawg VS. Dan03Mach Race Date.. Well, I really want this race to happen too, especially since I was running faster than Dan 2 weeks ago but I'm going to have to hold off for a while. My wife was laid off a few months ago and a job she had lined up fell through so she's now looking for another one. This means money is going to be tight for a while and depending on what she does find it might be longer than I would like. How my luck has been lately, I figure if I do race I'll prolly bust the tranny or clutch and not have the $$ to fix it so no more racing for me until our situation changes for the better. Oh well, it's all about priorities... Dan you can claim the bragging rights for now. __________________ 2003 Black Mach 1 - 5 Spd. - I-Up -------------------------------------- Built: June 13, 2003 -------------------------------------- Tuned Dyno: HP & TQ 2005 Mach 1 / Bullitt Shootout Super Street Bracket Winner 2005 DFW-SVTOA Day at the Drags Bracket Winner Performance Mod's by HPP Racing R.I.P. 99whitecobra99

08-10-2005, 06:34 AM	#69
Dan03mach Spool'n UP Join Date: Nov 2003 Location: DFW TX Posts: 3,952	Re: Dawg VS. Dan03Mach Race Date.. Sorry to hear about your wife loosing her job Patrick.. By the way I went out to Dale last Thursday and I was running low 7.8's at 87.5mph with by best of 1.649 60fts.. And I was doing that with a bad rear lower control arm.. I found out that my bushing is pretty much split in half and hanging out a little and the end of the control arm has a chunck taken out of it from where it hit the bolt that holds on the bottom of the shock.. So I ordered UPR double adjustable uppers and single adjustable lowers, with KYB AGX adjustable shocks... Pretty much the exact same rear suspesion set up as Bill has.. I wasn't going to tell you but since you aren't going to run anymore it doesn't matter anymore... __________________ 03 Dark Shadow Grey Mach1 "SMOKEY" *"SLOW STREET CAR"* Mods: Turbocharged 9 Sec. Slow Street Car

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)