2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Tuning & Dyno Testing/Results

Tuning & Dyno Testing/Results Questions, experiences & results for electronic tuning and dyno tests

Reply
 
Thread Tools Display Modes
Old 03-24-2006, 07:20 PM   #51
shakinmach03
300+ WHP Club
 
shakinmach03's Avatar
 
Join Date: Oct 2005
Location: Killeen TX
Posts: 264
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by 20Mach03
Where is sunshine top and Accessories? I have An 03 mach that i would like dynoed. Do they adjust A/F? How much? Thanks
Sorry for the delay.

Sunshine Tops and Accessories is in Killeen TX off of 38th Street by Killeen High School. And they do tune and adjust air/fuel, but I'm not sure how good their tunes are, never heard anybody use them. Althought, the owners son, he also runs the dyno and tunes I think, his Camaro is built and is running 11s, so I guess they ain't that bad!!
__________________
2003 Zinc Yellow Mach
309hp/324trq with exhaust only.
13.03@104.97 1.9 60ft
shakinmach03 is offline   Reply With Quote
Old 03-25-2006, 11:03 AM   #52
20Mach03
Registered User
 
Join Date: Aug 2005
Posts: 38
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by shakinmach03
Sorry for the delay.

Sunshine Tops and Accessories is in Killeen TX off of 38th Street by Killeen High School. And they do tune and adjust air/fuel, but I'm not sure how good their tunes are, never heard anybody use them. Althought, the owners son, he also runs the dyno and tunes I think, his Camaro is built and is running 11s, so I guess they ain't that bad!!
Thanks for the info. I had it dynoed there about 2 weeks ago and it put down 309/336 Sae corrected.
20Mach03 is offline   Reply With Quote
Old 03-25-2006, 09:51 PM   #53
shakinmach03
300+ WHP Club
 
shakinmach03's Avatar
 
Join Date: Oct 2005
Location: Killeen TX
Posts: 264
Re: What to do to get 300 rwhp on a Mach 1

Nice, what mods do ya have?

And what color is your car, wondering if I've seen it around town.
__________________
2003 Zinc Yellow Mach
309hp/324trq with exhaust only.
13.03@104.97 1.9 60ft
shakinmach03 is offline   Reply With Quote
Old 03-26-2006, 02:29 AM   #54
slo65
mmm... sacralicious
 
slo65's Avatar
 
Join Date: Jan 2006
Location: Whittier, California
Posts: 259
Re: What to do to get 300 rwhp on a Mach 1

dynoed the car tonight, stock aside from k&n and welded in spintechs (stock midpipe/tailpipes)

283/305
slo65 is offline   Reply With Quote
Old 03-26-2006, 11:10 AM   #55
20Mach03
Registered User
 
Join Date: Aug 2005
Posts: 38
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by shakinmach03
Nice, what mods do ya have?

And what color is your car, wondering if I've seen it around town.
My car is dsg. As far as mods i dont really have much more than you.
Off road x
2 chamber flows
php intake spacer
fan switch
line lock
4:30's
triax
free air mods + k&n
All lakewood suspension 90/10 50/50
Nitto 555
And i just recieved my diablo tuner.( after the dyno pull)
20Mach03 is offline   Reply With Quote
Old 04-08-2006, 06:47 PM   #56
M6A6C6H
Mach 1 Owner of the Year!
 
M6A6C6H's Avatar
 
Join Date: Apr 2006
Location: Woodbridge, Virginia
Posts: 26
Arrow Re: What to do to get 300 rwhp on a Mach 1

Thanks for having the stock run on there! Does anyone know what the stock Crank power is? I heard that the 305hp rating was little weak and not correct. Also I am a new Mach 1 owner just got it on thursday 4-06-06.. Torch Red with all the good stuff!

Brian
M6A6C6H is offline   Reply With Quote
Old 04-08-2006, 06:59 PM   #57
04whtmch1
Registered User
 
04whtmch1's Avatar
 
Join Date: Feb 2006
Location: mpls mn.
Posts: 153
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by M6A6C6H
Thanks for having the stock run on there! Does anyone know what the stock Crank power is? I heard that the 305hp rating was little weak and not correct. Also I am a new Mach 1 owner just got it on thursday 4-06-06.. Torch Red with all the good stuff!

Brian
04's are rated at 310 with a stick. I dynoed on a dyno jet 282hp and 308tq. Stock, with the screen out. 1,100 miles.
__________________
12.69@109 Minor mods 300hp 330tq -Sold, for a older slower Cobra.{for now]
04whtmch1 is offline   Reply With Quote
Old 04-11-2006, 09:06 AM   #58
Marc's Mach
Registered User
 
Marc's Mach's Avatar
 
Join Date: Apr 2005
Location: Windsor, Ontario
Posts: 175
Re: What to do to get 300 rwhp on a Mach 1

Finally dyno'd my car with the headers and got a tune 303.3 hp and 322.2 lb/ft. Thats just a complete SLP catted exhaust and long tubes. Paper filter and a custom tune.
__________________
Marco
2003 Torch Red Mach 1 5spd
IUP
17x10.5 Mach 1 deep dish wheels (driving)
15x8.5 Centerline Convo wheels (track)
CDC Mach 1 Honeycomb Trim Panel
Clear Fog Lights
MGW Orange Handle Short Shifter
SLP Loudmouth 1 cat back
SLP Catted X-Pipe
SLP Long Tube Headers
Aluminum Driveshaft
SCT Custom Tune
C & L True Flow intake
Strange 10-way adjustables

PHP Intake Spacer (ordered)
-----------------------------------------------
303.3 hp & 322.2 lb-ft
Marc's Mach is offline   Reply With Quote
Old 04-15-2006, 03:27 PM   #59
gutboybarrelhou
Registered User
 
gutboybarrelhou's Avatar
 
Join Date: Aug 2005
Posts: 23
Re: What to do to get 300 rwhp on a Mach 1

Dyno tuned yesterday: On 93 Octane: 305hp at 4900 RPM/ 335 TQ at 4000 RPM....with an automatic tranny!

MODS=AFM Powerpipe, Pro M 80mm MAF, custom return style fuel system, coil pack conversion with Ford racing 9mm plug wires, FMS shorties ceramic headers, BBK off-road x pipe, 2 chamber flowmasters, Roush side exit pipes, 3:73 gears.
__________________
http://img131.imageshack.us/img131/4406/gutboy1jy3.gif[/img]http://img201.imageshack.us/img201/2...boymodsgz4.pnghttp://img154.imageshack.us/img154/6937/gutboy2jb6.gif

1998 Roush Stage 1 automatic
Swapped with 2003 Mach 1 engine
80mm Pro-M MAF; AFM Powerpipe;
FMS Shorty headers; BBK offroad X-pipe
Magnaflows, Roush side exit; 3:73 cogs;
Custom tune 317/335.
gutboybarrelhou is offline   Reply With Quote
Old 04-15-2006, 05:15 PM   #60
99GTCONV
Registered User
 
99GTCONV's Avatar
 
Join Date: Jun 2004
Location: Chesapeake, Virginia
Posts: 734
Re: What to do to get 300 rwhp on a Mach 1

i got 320rwhp and 331 TQ on a dyno jet with my mods which included SLP Longtubes, Catted x pipe, borla stinger catback, k&n air charger, php intake spacer and a custom SCT Tune.
99GTCONV is offline   Reply With Quote
Old 04-27-2006, 10:54 AM   #61
TRX7
OLDMULE
 
TRX7's Avatar
 
Join Date: Jul 2003
Location: UPPER MARLBORO, Maryland
Posts: 750
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by southbeachmach1
The only part that sucks about the install is getting that darn EGR to mount back up correctly. Let me know if you need pictures.
Do you still have those pictures? I will be doing the PHP spacer mod soon.
__________________
Let them hate us,so long as they fear us........
Caligula


2003 Azure Blue Mach1
FRPP Clutch, flywheel, and pressure plate
MGW short shifter
MM aluminum steering rack bushings
JLT RAI
Aluminum Drive shaft
MagnaFlow X pipe with cats
MagnaFlow cat back
Eibach Prokit springs / stock isolaters
Eibach Pinion snubber
EIBACH PRODAMPER KIT
MM LCA
---------------------------------------------------
13.17 @ 104 - STOCK
12.98@106 - Modified
270 HP 292 TQ - STOCK DYNO #s
TRX7 is offline   Reply With Quote
Old 06-12-2006, 01:18 AM   #62
TR04MACH
Registered User
 
Join Date: Dec 2005
Location: Herndon, VA
Posts: 541
Re: What to do to get 300 rwhp on a Mach 1

Just got past the 300 mark. I dynoed 263whp and 281wtq dead stock. I added the slp longtube headers, slp catted x and slp loudmouth 2s and put down 306whp and 318wtq with nothing else on a stock tune. I'm hoping with the addition of a jlt rai, php spacer and tune i could get up to maybe 325-330whp. My a/f ratio was still on the rich side even with the full exhaust.
__________________
2004 Torch Red Mach 1!
Eaton Swapped 8psi
SLP Longtube Headers
SLP Catted Shorty X
SLP Powerflo Catback
JLT RAI Intake
SCT Tune on 4bank chip
Nitto DR 275/40/17
MM Lower Control Arms
MM Urethane Rack Bushings
Hawk HPS Pads w/ MM brake lines
MM Full Length Subframes
Steeda Tri-ax
Sirius

For Sale!
TR04MACH is offline   Reply With Quote
Old 06-12-2006, 05:28 PM   #63
Azurelou
Registered User
 
Azurelou's Avatar
 
Join Date: Feb 2005
Location: usa
Posts: 122
Re: What to do to get 300 rwhp on a Mach 1

Has anyone put a super chip in, and does that help?
Or can the stock chip be tuned in by the Dyno technicians?
Azurelou is offline   Reply With Quote
Old 06-15-2006, 09:01 PM   #64
Redline
East SF bay mach1
 
Redline's Avatar
 
Join Date: Mar 2004
Location: Martinez, ca
Posts: 515
Re: What to do to get 300 rwhp on a Mach 1

I dyno'd 278/300 with slp catted xpipe and a k&n filter. I would like to be at 300/325ish. I have a mac catback on the way (bought it more for sound then pwoer although its nice to have 2.5" piping all the way back) and i was planning on a php spacer, a good maf/cai combo and a tune.
Redline is offline   Reply With Quote
Old 06-17-2006, 08:38 PM   #65
paul
Registered User
 
Join Date: May 2005
Location: paducah
Posts: 4
Re: What to do to get 300 rwhp on a Mach 1

Wanted to let everyone know, I changed the water pump pulley on my mach to a motoblue underdriven pulley. I put a diablo programer on it just to watch the engine temp. At 6000 grand the temp was 193 with the underdriven pulley compared to 188 with the factory water pump pulley. Due to the car running hotter with the underdrive pulley the computer pulled timing. End result 293.7 hp at the wheels with the aftermarket pulley and 299.8 hp with the stock pulley. These cars are really finicky. paul








Quote:
Originally Posted by southbeachmach1
Well I have done a few mods and have done my best to dyno after each mod or group of mods to see what the gains were and my last dyno put me at 301 rwhp and 319 rwtq.

Bone Stock = 266 hp

Bassani SS Offroad X-Pipe and Catback K&N Air Filter (Drop In) = 283 hp

SCT Custom Chip = 292 hp

PHP Intake Spacer and JLT RAI = 301 hp

Also noteworthy, its not all about the peak HP/TQ, on the curve there are some areas of significant gain from mod to mod.

I just thought this might help some of you who might be questioning as I did what mods make the most difference. By far the exhaust/K&N was the single largest gain so far. Like many of you I hate spending money on stuff that doesn't help the car, or causes a loss in power. What a waste.
paul is offline   Reply With Quote
Old 06-18-2006, 09:34 AM   #66
mgk2
Registered User
 
mgk2's Avatar
 
Join Date: Aug 2002
Location: Pembroke Pines,Fla
Posts: 986
Re: What to do to get 300 rwhp on a Mach 1

Joining the 300hp club. After all these parts installed and Sct Xcalibrator2 flashed I have 306.09 hp and 322.07 the a/f ratio 13.43 to 13.24 on a Winpep DynoJet. My parts Kooks 1 5/8 x 2 1/2 headers, Kooks catted x-pipe, Php intake spacer, JLT RAI intake and flash tuned. Did I do ok or am I missing something?
Mike
mgk2 is offline   Reply With Quote
Old 06-19-2006, 12:30 AM   #67
RAT
'10 TLAC FS Champion
 
RAT's Avatar
 
Join Date: Jul 2004
Location: Bossier City, La
Posts: 439
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by paul
Wanted to let everyone know, I changed the water pump pulley on my mach to a motoblue underdriven pulley. I put a diablo programer on it just to watch the engine temp. At 6000 grand the temp was 193 with the underdriven pulley compared to 188 with the factory water pump pulley. Due to the car running hotter with the underdrive pulley the computer pulled timing. End result 293.7 hp at the wheels with the aftermarket pulley and 299.8 hp with the stock pulley. These cars are really finicky. paul

That does not surprise me. I hear at 190 deg. the computer starts to pull timing. Set your fans to come on earlier and pour in a bottle of Red Line Water Wetter should help out.
__________________
RAT
65-FS
Red River Region - SCCA

2004 Torch Red Mach 1
5 speed IUP
K & N Air Filter
Denso IT16
MM 1/4" wheel spacers
Kumho XS
Mach 1 Floor Mats
Hawk HPS Brake Pads
Tokico D-Spec Struts/Shocks
Steeda 35 MM Anti-Sway Bar
RAT is offline   Reply With Quote
Old 07-28-2006, 02:14 PM   #68
Stang6T8
Guest
 
Join Date: Jul 2006
Location: Central cali
Posts: 439
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by meist@steeda.ca
We offer a chip and CAI kit that will put you over 300rwhp/tq

Also, adding exhaust helps!
so did he ever show any numbers and prices....
Stang6T8 is offline   Reply With Quote
Old 07-29-2006, 05:03 PM   #69
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by Stang6T8
so did he ever show any numbers and prices....

HA!! No, because they are full of s***


By the way guys stay CLEAR away from Steeda underdrive pulleys. The damper pulley will throw your engine off balance and melt your oil pump gears - aka - buh bye engine.... This didn't happen to me, someone else blew up this landmine in front of me before I stepped on it.

I'm not happy with Steeda and their BS parts...
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 07-30-2006, 04:06 PM   #70
crimsongt
Trailor Park Pimpin
 
crimsongt's Avatar
 
Join Date: Nov 2004
Location: West Georgia
Posts: 377
Re: What to do to get 300 rwhp on a Mach 1

steeda's claim is hard to believe
but I would not be surprsied to see a mach 1 make those numbers, but extremely rare.
its all in the tune
__________________
2003 Mach 1
Check out WWW.MUSTANGMAFIA.COM
crimsongt is offline   Reply With Quote
Old 08-09-2006, 06:59 PM   #71
ricky bobby
mach everthing
 
ricky bobby's Avatar
 
Join Date: Aug 2006
Location: vancover british columbia
Posts: 715
Re: What to do to get 300 rwhp on a Mach 1

I started a tread about dyno machines to get some answers on the topic of high dyno readings. My tec works at ford svt and does my tuning and dyno setup. He told me that there are dynos that operate differently and the preloaded drum of the dynotec dynos give you a truer reading. The unloaded brands give higher readings of rwhp and torque due to the nonexistance of pushing a load.
__________________
If yur not first yur last!
Was 03 mach 1 white automatic
295.1 rwhp 321 ft rwtq
accufab throttle body
c and L true flow intake tube
bassani catted x pipe
slp lm1 (after dyno)
steeda full lenth sfc
kb jacking rails matrix brace
steeda front back strut braces
** Update coming soon **
ricky bobby is offline   Reply With Quote
Old 11-11-2006, 03:10 AM   #72
JW Mach 1
Registered User
 
Join Date: Jul 2006
Location: grove city, ohio
Posts: 76
Re: What to do to get 300 rwhp on a Mach 1

xpipe and flowmasters with chip i have 315 rwhp sae with 340 trq i thought that was pretty hard to believe with just these mods alone.
JW Mach 1 is offline   Reply With Quote
Old 11-11-2006, 03:39 PM   #73
townson24
Registered User
 
townson24's Avatar
 
Join Date: Jun 2004
Location: Houston, Tx.
Posts: 553
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by JW Mach 1 View Post
xpipe and flowmasters with chip i have 315 rwhp sae with 340 trq i thought that was pretty hard to believe with just these mods alone.
Sounds about 30 hp too much. I'd say that you are around 280-285, maybe.
__________________
mods:
jlt cai, php spacer, brisk spark plugs, bbk ceramic lt's, bbk catted short h pipe, SSS catback, carbon fiber driveshaft, upr upper and lower control arms, mgw shifter, chip/tune, HP custom cams, canton 9qt pan w/ windage tray, 3.90 gears, steeda pullies, rear seat delete, p&p manifold.

349 HP & 320 TQ
car weight:3340 w/half tank of fuel
townson24 is offline   Reply With Quote
Old 11-11-2006, 06:18 PM   #74
FloridaOrange
SCS Homie
 
FloridaOrange's Avatar
 
Join Date: Jan 2005
Location: Southwest Florida
Posts: 3,643
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by JW Mach 1 View Post
xpipe and flowmasters with chip i have 315 rwhp sae with 340 trq i thought that was pretty hard to believe with just these mods alone.
Dynojet I figure? I agree with townson, those #'s sound high.
FloridaOrange is offline   Reply With Quote
Old 11-12-2006, 08:11 AM   #75
crimsongt
Trailor Park Pimpin
 
crimsongt's Avatar
 
Join Date: Nov 2004
Location: West Georgia
Posts: 377
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by JW Mach 1 View Post
xpipe and flowmasters with chip i have 315 rwhp sae with 340 trq i thought that was pretty hard to believe with just these mods alone.
I know one guy how makes those numbers with the above mentioned but he runs racing fuel and a very aggressive tune
__________________
2003 Mach 1
Check out WWW.MUSTANGMAFIA.COM
crimsongt is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<