under hood VIN badge pic - 2003-04 Mach 1 Registry Owners Club

jeffro · 06-18-2013, 09:54 PM

there was an old post, i can't seem to locate, had a guy you could send your VIN to and he made a polished looking plate that went under your hood near drivers side of radiator. does anyone have a pic of one of those? thanks.

jeffro

03sh8ker · 06-18-2013, 10:00 PM

Sorry can't help with the pic, but I'm interested in one too!!

falcongtho3 · 06-18-2013, 10:07 PM

Check this thread, it might be what you're looking for. I had the set, the one underhood left long ago and the smaller one still resides on my center stack.

Smith · 06-18-2013, 10:23 PM

He doesn't offer them anymore, got shut down by Ford.

jeffro · 06-18-2013, 10:30 PM

i'm just looking for a pic of one...

not a gt · 06-18-2013, 10:42 PM

Did it kinda look like the plate I got with my SCT tuner with my name and serial number for the tuner?

jeffro · 06-18-2013, 11:09 PM

idk, let me see it, i only got a emblem badge with my sct

jeffro · 06-18-2013, 11:21 PM

found it...

not a gt · 06-19-2013, 12:21 AM

That is nice!!!

horseplay01 · 06-20-2013, 01:02 PM

I want one...

Sent from my iPhone using Tapatalk

jeffro · 06-20-2013, 09:33 PM

I got a guy who could make these for us if anyone was interested. it would prob be like $20 or so. If I could get a solid list of interested people, i could re-fire this for a while.

Interests?

Holy Mach · 06-20-2013, 09:46 PM

I'm interested. The same guy also made a small one that was cut to fit in front of the shifter.

not a gt · 06-20-2013, 10:13 PM

Quote:

Originally Posted by jeffro

I got a guy who could make these for us if anyone was interested. it would prob be like $20 or so. If I could get a solid list of interested people, i could re-fire this for a while.

Interests?

Tell me where to send the money jeffro!!

horseplay01 · 06-20-2013, 10:29 PM

I'm 100% in!!!

Sent from my iPhone using Tapatalk

L.T. Smash · 06-20-2013, 10:32 PM

also interested!

not a gt · 06-20-2013, 11:07 PM

Alright Jeffro, this is your baby, hope you are counting and keeping track..

kylerobison · 06-20-2013, 11:09 PM

im in for a set

SGT GIPP · 06-21-2013, 12:32 AM

Count me in...let's get a group buy list!!

Smith · 06-21-2013, 10:51 AM

Quote:

Originally Posted by jeffro

found it...

Hey, that first pic is my car!! Put me down for one too. I would like an extra one.

not a gt · 06-21-2013, 12:26 PM

Quote:

Originally Posted by Smith

Hey, that first pic is my car!! Put me down for one too. I would like an extra one.

The question is is it STILL that clean??

Ichevyracer · 06-21-2013, 04:31 PM

Quote:

Originally Posted by jeffro

I got a guy who could make these for us if anyone was interested. it would prob be like $20 or so. If I could get a solid list of interested people, i could re-fire this for a while.

Interests?

I would like a set. Just let me know where to send money and info

jeffro · 06-22-2013, 12:16 AM

ok guys, i've sent the measurements in for the badge, sounds like we are a GO on this. What I will need is the info for your cars, it would be a lot easier for me for yall to do the research and i just print what you send me. As you can see in the pics, there are 2 different versions. I like the size of the larger one, it will fill in that recessed part great on the drivers side.
Here is the question, what do yall want the wording to say?? meaning in both pics, one has your name, one just has the car.
Yall tell me what you want it to say and we will go from there. I would like to just focus on one design, so let's get this figured out and i will post my e-mail for your info and I will get a price figured out.

this sounds great, looking forward to this!

Jeff

edit to post to mods: i am not trying to become a vender or make money on this process.

mods please respond.

not a gt · 06-22-2013, 12:45 AM

I like the one that says :
owner
vin build date

Sounds good so far Jeffro, guess it is like a poll now but I think that one is better, we all know its a 4.6 L !!!( The first one looks like it says that).

ASH302 · 06-22-2013, 03:37 AM

here mine for the mach

ASh

shadowmaker · 06-22-2013, 07:52 AM

Are they metal or is it a decal that looks metal?

06-18-2013, 09:54 PM	#1
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	under hood VIN badge pic there was an old post, i can't seem to locate, had a guy you could send your VIN to and he made a polished looking plate that went under your hood near drivers side of radiator. does anyone have a pic of one of those? thanks. jeffro

06-18-2013, 10:00 PM	#2
03sh8ker Registered User Join Date: Dec 2012 Location: Crockett, Ca Posts: 289	Re: under hood VIN badge pic Sorry can't help with the pic, but I'm interested in one too!! __________________ Black 2003 Mach 1-5spd, IUP, K&N FIPK, Flowmaster American Thunder catback, MRT catted H, Steeda Tri-ax, Brembo slotted rotors, Black AFS 17x9 & 17x10.5 Mach wheels

06-18-2013, 10:07 PM	#3
falcongtho3 Moderating at Mach 1 Join Date: Aug 2002 Location: Baton Rouge, La. Posts: 16,270	Re: under hood VIN badge pic Check this thread, it might be what you're looking for. I had the set, the one underhood left long ago and the smaller one still resides on my center stack. __________________ Krewe de la Mach Rouge #340804 13th Mach 1 built 11/07/02 Build Date 12/13/02 Delivery

06-18-2013, 10:23 PM	#4
Smith It's all about the Shaker Join Date: Aug 2011 Location: Lynchburg, VA Posts: 1,249	Re: under hood VIN badge pic He doesn't offer them anymore, got shut down by Ford. __________________ 2004 Mach 1, Competition Orange, 5-spd, (1 of 914), 2nd Owner, Mostly Stock, MCA#84554.

06-18-2013, 10:30 PM	#5
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	Re: under hood VIN badge pic i'm just looking for a pic of one...

06-18-2013, 10:42 PM	#6
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: under hood VIN badge pic Did it kinda look like the plate I got with my SCT tuner with my name and serial number for the tuner? __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

06-18-2013, 11:09 PM	#7
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	Re: under hood VIN badge pic idk, let me see it, i only got a emblem badge with my sct

06-18-2013, 11:21 PM	#8
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	Re: under hood VIN badge pic found it...

06-19-2013, 12:21 AM	#9
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: under hood VIN badge pic That is nice!!! __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

06-20-2013, 01:02 PM	#10
horseplay01 TheBlast.FM Join Date: Dec 2004 Location: Raleigh, NC Posts: 347	I want one... Sent from my iPhone using Tapatalk

06-20-2013, 09:33 PM	#11
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	Re: under hood VIN badge pic I got a guy who could make these for us if anyone was interested. it would prob be like $20 or so. If I could get a solid list of interested people, i could re-fire this for a while. Interests?

06-20-2013, 09:46 PM	#12
Holy Mach Registered User Join Date: May 2005 Location: Peoria, Arizona Posts: 8	Re: under hood VIN badge pic I'm interested. The same guy also made a small one that was cut to fit in front of the shifter.

06-20-2013, 10:29 PM	#14
horseplay01 TheBlast.FM Join Date: Dec 2004 Location: Raleigh, NC Posts: 347	I'm 100% in!!! Sent from my iPhone using Tapatalk

06-20-2013, 10:32 PM	#15
L.T. Smash Registered User Join Date: Aug 2007 Location: Fredericksburg, VA Posts: 392	Re: under hood VIN badge pic also interested! __________________ 2004 DSG Mach 1 476rwhp and 406rwtq at 8lb Kenne Bell 2.1 blower comp cams 106100 LTs, Prochamber, catback built rear with 4.30s accufab TB, alum ds, Roush shifter AFS wheels, Nitto tires, Eibach springs

06-20-2013, 11:07 PM	#16
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: under hood VIN badge pic Alright Jeffro, this is your baby, hope you are counting and keeping track.. __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

06-20-2013, 11:09 PM	#17
kylerobison 1st Gear Join Date: Feb 2013 Location: tampa bay Posts: 80	Re: under hood VIN badge pic im in for a set __________________ 2003 DSG Mods: Mac O/R Prochamber, LM1 Catback, K&N Drop-In Filter, Custom Tune, MGW Shifter, Ford 4.10 Gears 290rwhp 306rwtq

06-21-2013, 12:32 AM	#18
SGT GIPP Registered User Join Date: Mar 2010 Location: Macon,Ga Posts: 220	Re: under hood VIN badge pic Count me in...let's get a group buy list!!

06-22-2013, 12:16 AM	#22
jeffro Red Rocket Join Date: Jan 2013 Location: Tally-Ho FL Posts: 438	Re: under hood VIN badge pic ok guys, i've sent the measurements in for the badge, sounds like we are a GO on this. What I will need is the info for your cars, it would be a lot easier for me for yall to do the research and i just print what you send me. As you can see in the pics, there are 2 different versions. I like the size of the larger one, it will fill in that recessed part great on the drivers side. Here is the question, what do yall want the wording to say?? meaning in both pics, one has your name, one just has the car. Yall tell me what you want it to say and we will go from there. I would like to just focus on one design, so let's get this figured out and i will post my e-mail for your info and I will get a price figured out. this sounds great, looking forward to this! Jeff edit to post to mods: i am not trying to become a vender or make money on this process. mods please respond. Last edited by jeffro; 06-22-2013 at 02:25 AM.

06-22-2013, 12:45 AM	#23
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: under hood VIN badge pic I like the one that says : owner vin build date Sounds good so far Jeffro, guess it is like a poll now but I think that one is better, we all know its a 4.6 L !!!( The first one looks like it says that). __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

06-22-2013, 03:37 AM	#24
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: under hood VIN badge pic here mine for the mach ASh Attached Thumbnails __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

06-22-2013, 07:52 AM	#25
shadowmaker Registered User Join Date: Aug 2009 Location: VA Posts: 2,136	Re: under hood VIN badge pic Are they metal or is it a decal that looks metal?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode