2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 07-31-2013, 09:32 PM   #701
32vAB
Certified
 
32vAB's Avatar
 
Join Date: Oct 2010
Location: Irvine, Ky
Posts: 531
Re: Eaton Swap.....

haven't tried mine yet, but i'll drive it tomm if weather permits and see if its still working
__________________
03 Mach 1, 5.0, Comp Cams, Eaton, 2.76 pulley
02 SuperDuty King Cab 4x4

Home of the Modified Stage 2 FPDM!

http://www.ebay.com/itm/121148784860...84.m1555.l2649
32vAB is offline   Reply With Quote
Old 08-01-2013, 09:33 AM   #702
JaybTorchedMach
Registered User
 
JaybTorchedMach's Avatar
 
Join Date: Mar 2010
Location: Albuquerque, NM
Posts: 1,746
Re: Eaton Swap.....

I tried mine one day for the hell of it and it didn't work either. I replaced with Cobra Cable and all. It's not a big deal since I never take my car anywhere that requires cruise control so I haven't tried to fix it yet.
JaybTorchedMach is offline   Reply With Quote
Old 08-01-2013, 09:35 AM   #703
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Eaton Swap.....

Mine works fine.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 08-01-2013, 10:11 AM   #704
watman02
Registered User
 
watman02's Avatar
 
Join Date: Aug 2009
Location: Denver, Ia
Posts: 443
Re: Eaton Swap.....

mine works great even with mach cable.
__________________
mods:cai, flowmaster 40's, o/r x tune
best et: 13.17@107mph & 8.56@84.5 1/8
new mods: spacer, 98 cobra cams 4.10's
new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76
New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets
TUNED by ME!....with SCT proracer softwear!!
482hp / 481tq
new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4

00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune
times: 1.8 60' 12.8 @111
watman02 is offline   Reply With Quote
Old 08-02-2013, 06:28 PM   #705
bleedingfordblu
Registered User
 
bleedingfordblu's Avatar
 
Join Date: May 2007
Location: Leesburg, VA
Posts: 1,985
Re: Eaton Swap.....

hmmm interesting. ill have to look more into it thanks guys
__________________
2003 Azure Blue Mach 1

Stock bottom end/compression
Eaton M112
Stock upper
Stock lower
K&N intake
Built T56
Bassani mid length headers
Bassani catted x pipe
Bassani slash cut tip catback
Stock 03 Cobra IRS
18x9/10 Forgestar F14
Tuned by Chris Macduff at IMA motorsports
429hp 407 tq @ 7.5 lbs of boost
bleedingfordblu is offline   Reply With Quote
Old 09-09-2013, 09:19 PM   #706
SHAUN
Registered User
 
Join Date: Nov 2010
Location: charleston sc
Posts: 54
Re: Eaton Swap.....

I finished mines
It took three months and the driving experience is rather impressive. I will be able to drive to fastlane in Benson NC for the complete tuning in a couple of weeks. I just have to wire in the IAT2 sensor and connect the vacuum gauge.
Attached Images
File Type: jpg 2013-09-03 18.31.56.jpg (96.8 KB, 60 views)
SHAUN is offline   Reply With Quote
Old 09-10-2013, 03:40 AM   #707
Cobra Drifter
Carbon Driven
 
Cobra Drifter's Avatar
 
Join Date: Apr 2010
Location: Los Angeles
Posts: 273
Re: Eaton Swap.....

Question: is the 01 Cobra clutch cable needed to be replaced (with which?) when doing the eaton swap and a T-56 swap with a McLeod twin disc RST cutch?
__________________
2009 Shelby GT500 Vapor Metallic Silver w/Ebony Stripes

2001 Cobra Vert. #1439/3384 (Getting full race build)
Cobra Drifter is offline   Reply With Quote
Old 09-10-2013, 12:18 PM   #708
watman02
Registered User
 
watman02's Avatar
 
Join Date: Aug 2009
Location: Denver, Ia
Posts: 443
Re: Eaton Swap.....

Quote:
Originally Posted by SHAUN View Post
I finished mines
It took three months and the driving experience is rather impressive. I will be able to drive to fastlane in Benson NC for the complete tuning in a couple of weeks. I just have to wire in the IAT2 sensor and connect the vacuum gauge.
sweet what pulley u running?
__________________
mods:cai, flowmaster 40's, o/r x tune
best et: 13.17@107mph & 8.56@84.5 1/8
new mods: spacer, 98 cobra cams 4.10's
new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76
New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets
TUNED by ME!....with SCT proracer softwear!!
482hp / 481tq
new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4

00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune
times: 1.8 60' 12.8 @111
watman02 is offline   Reply With Quote
Old 09-10-2013, 12:28 PM   #709
watman02
Registered User
 
watman02's Avatar
 
Join Date: Aug 2009
Location: Denver, Ia
Posts: 443
Re: Eaton Swap.....

Quote:
Originally Posted by Cobra Drifter View Post
Question: is the 01 Cobra clutch cable needed to be replaced (with which?) when doing the eaton swap and a T-56 swap with a McLeod twin disc RST cutch?
Im running the stock clutch at the moment.
__________________
mods:cai, flowmaster 40's, o/r x tune
best et: 13.17@107mph & 8.56@84.5 1/8
new mods: spacer, 98 cobra cams 4.10's
new times: 2.12 60' 1/8-8.44@85.97 1/4-13.0@109.76
New mods:Ported eaton swap divisonX 340 pump, 3.4 pulley@ 9#, 60# dekas, Lmaf, egr delete, aem wideband, ET streets
TUNED by ME!....with SCT proracer softwear!!
482hp / 481tq
new times:1.7-60' 1/8-7.724 @92.4 and 11.8 @118 1/4

00 SS Camaro M6 with 8.8 rear 3.73 gear. bolt on's and tune
times: 1.8 60' 12.8 @111
watman02 is offline   Reply With Quote
Old 09-12-2013, 02:08 AM   #710
Cobra Drifter
Carbon Driven
 
Cobra Drifter's Avatar
 
Join Date: Apr 2010
Location: Los Angeles
Posts: 273
Re: Eaton Swap.....

Me too but its maxed out already with the clutch adjuster and grabs just as the clutch pedal is completely let out. After the eaton swap and the T56 swap with McLeod clutch its just not right height. Anything with the clutch needing a different throwout bearing?
__________________
2009 Shelby GT500 Vapor Metallic Silver w/Ebony Stripes

2001 Cobra Vert. #1439/3384 (Getting full race build)
Cobra Drifter is offline   Reply With Quote
Old 09-12-2013, 06:07 AM   #711
SHAUN
Registered User
 
Join Date: Nov 2010
Location: charleston sc
Posts: 54
Re: Eaton Swap.....

Quote:
Originally Posted by watman02 View Post
sweet what pulley u running?
I'm new to the boost world so, I measured the pulley that came with everything at 2 7/8" or 2.87".
SHAUN is offline   Reply With Quote
Old 07-01-2014, 09:19 AM   #712
04TorchRedMach1
Registered User
 
Join Date: May 2014
Location: Round Lake, IL
Posts: 12
Re: Eaton Swap.....

Sorry to revive an old thread, but I just picked up an 04 Torch Red Mach 1, and plan to supercharge it. Is it still difficult to find all the parts for the Eaton swap? I haven't had a chance to look very much. I did see a swap kit on eBay for 4k which seems very very high. Is anybody selling any kits or have any left over parts? Again i apologize for reviving an old thread.

Thanks.
04TorchRedMach1 is offline   Reply With Quote
Old 07-01-2014, 11:20 AM   #713
Silver_Bullet
2003 DSG Mach 1
 
Silver_Bullet's Avatar
 
Join Date: Feb 2005
Location: Orlando,Fl
Posts: 328
Re: Eaton Swap.....

Quote:
Originally Posted by 04TorchRedMach1 View Post
Sorry to revive an old thread, but I just picked up an 04 Torch Red Mach 1, and plan to supercharge it. Is it still difficult to find all the parts for the Eaton swap? I haven't had a chance to look very much. I did see a swap kit on eBay for 4k which seems very very high. Is anybody selling any kits or have any left over parts? Again i apologize for reviving an old thread.

Thanks.
Yea it's hard to find all of the parts one by one and takes a lone time to get them. I started my eaton last weekend I'm just working on it a few hrs after I get home form work every day, but I should have it done this weekend. What I did was buy a kit that had most of the pasts and just bought the rest when I found them. Here is a guy sell a kit that has most of the parts you need to do the swap http://www.svtperformance.com/forums...-FS-Eaton-Swap
Hope this helps you.
__________________
Eaton swap
60lb injectors
Mac Longtube headers
Mac O/R Prochamber with electric cutouts
Ford Racing M58
IRS
T56 with a 26 spline input shaft and McCloed RXT twin disc clutch
SLP line lock
03-04 Cobra mirrors
03-04 Cobra front bumper
03-04 cobra rear bumper
03-04 Cobra trunk and spoiler
03-04 Cobra side skirts
Cobra seats
Mach 1000 audio sound system
Silver_Bullet is offline   Reply With Quote
Old 07-01-2014, 11:39 AM   #714
04TorchRedMach1
Registered User
 
Join Date: May 2014
Location: Round Lake, IL
Posts: 12
Re: Eaton Swap.....

Quote:
Originally Posted by Silver_Bullet View Post
Yea it's hard to find all of the parts one by one and takes a lone time to get them. I started my eaton last weekend I'm just working on it a few hrs after I get home form work every day, but I should have it done this weekend. What I did was buy a kit that had most of the pasts and just bought the rest when I found them. Here is a guy sell a kit that has most of the parts you need to do the swap http://www.svtperformance.com/forums...-FS-Eaton-Swap
Hope this helps you.
Awesome, thank you very much!
04TorchRedMach1 is offline   Reply With Quote
Old 07-01-2014, 12:19 PM   #715
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Eaton Swap.....

Quote:
Originally Posted by Cobra Drifter View Post
Me too but its maxed out already with the clutch adjuster and grabs just as the clutch pedal is completely let out. After the eaton swap and the T56 swap with McLeod clutch its just not right height. Anything with the clutch needing a different throwout bearing?
I know this is an old post. But just to answer for the next guy who has this issue.

The problem is the pivot ball. It needs to be shortened. The clutch fork angle is off, which is why you are having that problem. When you run a thicker clutch setup, like the twin disk, the pivot ball must be shortened. McLeod makes an adjustable one. I'd start with an 1/8" shorter than stock and go from there.
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 07-02-2014, 08:24 AM   #716
SHAUN
Registered User
 
Join Date: Nov 2010
Location: charleston sc
Posts: 54
Re: Eaton Swap.....

Quote:
Originally Posted by 04TorchRedMach1 View Post
Sorry to revive an old thread, but I just picked up an 04 Torch Red Mach 1, and plan to supercharge it. Is it still difficult to find all the parts for the Eaton swap? I haven't had a chance to look very much. I did see a swap kit on eBay for 4k which seems very very high. Is anybody selling any kits or have any left over parts? Again i apologize for reviving an old thread.

Thanks.
Don't apologize, I thought I offended thread when I mentioned the pulley I have.
Looking at the ad silver_bullet provided, it appears that you will need an oil cooler, SC pulley, dampener, IC, IC pump, reservior, hardware and if you're using AC and power steering. Well, you understand. I have the IC with the lines I can sell, if needed.
SHAUN is offline   Reply With Quote
Old 07-02-2014, 09:55 AM   #717
Alex302
Registered User
 
Alex302's Avatar
 
Join Date: Feb 2012
Location: Plant city Fl
Posts: 38
Re: Eaton Swap.....

Quote:
Originally Posted by 04TorchRedMach1 View Post
Sorry to revive an old thread, but I just picked up an 04 Torch Red Mach 1, and plan to supercharge it. Is it still difficult to find all the parts for the Eaton swap? I haven't had a chance to look very much. I did see a swap kit on eBay for 4k which seems very very high. Is anybody selling any kits or have any left over parts? Again i apologize for reviving an old thread.

Thanks.

i found a almost complete kit on this forum about 3 months ago for a good price after about year of looking. i got lucky to find it and have to money in hand.
__________________
95 GT Mach1 and Eaton swapped
Alex302 is offline   Reply With Quote
Old 07-02-2014, 01:57 PM   #718
fastlane
Registered User
 
Join Date: Mar 2011
Location: Fort Worth, TX
Posts: 209
Re: Eaton Swap.....

Some parts are still hard to find like the oil cooler and miscellaneous brackets but you can still get an almost complete kit for a decent price with a little patience. I bought a "complete kit" about 2 years ago and I am still finding little things here and there that I need even though I have been running well enough for the last 1.5 years. I have things like the Cobra power steering pump and associated hoses that I am going to install soon to clean up my install.
fastlane is offline   Reply With Quote
Old 01-01-2015, 09:14 PM   #719
rcodemach1
Registered User
 
rcodemach1's Avatar
 
Join Date: Jan 2004
Location: san diego, ca
Posts: 1,461
Re: Eaton Swap.....

This thread should not end. LOL.

Did you end up using the GT500 brackets? I'm about to on mine. I got a near new H/E and brackets for a little over $100 shipped. Seems like a score at the moment but there will be some mods needed on the brackets.

I am using Jerry's anodized brackets for my swap rather than the full factory setup. I'm about halfway through the swap. Parts have not been too hard to find but aren't in the pristine shape that you could expect a few years ago. Makes sense since the donor cars are obviously a good 10-11 years old now.

I used information from this thread to do this swap and an Excel spreadsheet to keep track of parts numbers, status of orders, and so forth.

Quote:
Originally Posted by bleedingfordblu View Post
Has anyone used a gt500 h/e bracket? I got one from the guy i got my kit from and he says its better because with the cobra one you have to cut the bumper and stuff. Should i just get a cobra bracket?
__________________

'03 Mach, Oxford White, 5-spd, Eaton
'03 Mach, Black, automatic (parting out)
'98 GT, 410w, C4, Vortech

rcodemach1 is offline   Reply With Quote
Old 04-30-2015, 02:44 PM   #720
hendrixinthe70s
the red project
 
hendrixinthe70s's Avatar
 
Join Date: Jan 2008
Location: riverside california
Posts: 136
Re: Eaton Swap.....

hey guys im doing my eaton swap on stock internals and im just wondering what size pulley i should get to get to around 450 hp to the tires? is the stock one enough or should i go smaller?
__________________
PROJECT MUSCLE

03 mach1
full bassani exauhst
jlt rai
sportline lowering kit
hendrixinthe70s is offline   Reply With Quote
Old 04-30-2015, 02:54 PM   #721
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Eaton Swap.....

Quote:
Originally Posted by hendrixinthe70s View Post
hey guys im doing my eaton swap on stock internals and im just wondering what size pulley i should get to get to around 450 hp to the tires? is the stock one enough or should i go smaller?
Stock pulley will get the job done.
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 04-30-2015, 07:58 PM   #722
Alex302
Registered User
 
Alex302's Avatar
 
Join Date: Feb 2012
Location: Plant city Fl
Posts: 38
Re: Eaton Swap.....

Im making 464hp with the stock 8psi pulley.
__________________
95 GT Mach1 and Eaton swapped
Alex302 is offline   Reply With Quote
Old 05-01-2015, 10:56 AM   #723
TTSaleen
SVT Enthusiast
 
TTSaleen's Avatar
 
Join Date: Jul 2014
Location: NC
Posts: 278
Talking Re: Eaton Swap.....

I love my Eaton swap!
Car should have come like this from the factory!!

Smooth power delivery with gobs of low end torque!

__________________
Current -
1998 Saleen Black - Twin Turbo 5.4 - 1,300+ rwhp (5.0 Magazine's Battle at the Beach Dyno Winner 2013)
2008 Pontiac G8 GT -Liquid Red
2003 Mach 1 - Azure Blue 800rwhp on E85
1968 Charger - Green Gen3 Hemi Swap on E85
Instagram - ttsaleen
YouTube - 98saleen

Former -
2003 Mach 1 - Torch Red - Auto - Eaton Swap = 472rwhp
Link to build thread - http://www.mach1registry.org/forums/...d.php?t=132733
TTSaleen is offline   Reply With Quote
Old 05-01-2015, 10:58 AM   #724
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: Eaton Swap.....

Beautiful set up TT
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 05-01-2015, 11:04 AM   #725
TTSaleen
SVT Enthusiast
 
TTSaleen's Avatar
 
Join Date: Jul 2014
Location: NC
Posts: 278
Re: Eaton Swap.....

Quote:
Originally Posted by not a gt View Post
Beautiful set up TT
Thanks!
I might have screwed up yesterday! I took a friend of mine for a ride in the Mach. He was so impressed he made me a cash offer for the car. I countered with my offer (just throwing it out there) and he said he would let me know by this weekend.

LOL!

Ryan
__________________
Current -
1998 Saleen Black - Twin Turbo 5.4 - 1,300+ rwhp (5.0 Magazine's Battle at the Beach Dyno Winner 2013)
2008 Pontiac G8 GT -Liquid Red
2003 Mach 1 - Azure Blue 800rwhp on E85
1968 Charger - Green Gen3 Hemi Swap on E85
Instagram - ttsaleen
YouTube - 98saleen

Former -
2003 Mach 1 - Torch Red - Auto - Eaton Swap = 472rwhp
Link to build thread - http://www.mach1registry.org/forums/...d.php?t=132733
TTSaleen is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:26 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<