2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 12-03-2018, 09:32 PM   #1
D1SC_Mach
Registered User
 
Join Date: Jul 2018
Location: Eagleville
Posts: 6
D1SC issues

Looking to connect with other who have a procharger stage 2 kit with intercooler installed stock pulley.

I'm having some idle stall issues out of the blue, as well as hesitation.

I just had my tranny replaced with a tranzilla from rockland standard gear, along with a McLeod single disk clutch and flywheel (still in breakin process).

I have cleaned the IAC as well as fabricated the "Fix plate" which seemed to work for a while. but since the i got the car back from the tranny shop its kinda been down hill. Its going back to them for a vibration in the rear end as well as some pretty harsh bucking that started to occur after about 110 miles into the breakin. I will let off the gas lightly at almost any rpm and the car wants to buck...in first gear its pretty violent as i can easily wack the gas and thus create a bounce action.

Looking for some suggestions. Im prob going to rip out the MAF, and Mafia puck but that's going to involve taking the front bumper off and what not so that's going to be time sensitive as this is my daily.
D1SC_Mach is offline   Reply With Quote
Old 12-03-2018, 10:53 PM   #2
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,822
Re: D1SC issues

I had an issue like this with P1SC, wind up being dirty air at MAF in fender, went with HPX in pipe right before TB and issue solved...get rid of the MAF and get a HPX, you will be happy and tuner will hug you
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 12-03-2018, 11:16 PM   #3
D1SC_Mach
Registered User
 
Join Date: Jul 2018
Location: Eagleville
Posts: 6
Re: D1SC issues

Quote:
Originally Posted by not a gt View Post
I had an issue like this with P1SC, wind up being dirty air at MAF in fender, went with HPX in pipe right before TB and issue solved...get rid of the MAF and get a HPX, you will be happy and tuner will hug you

refresh my memory HPX?
D1SC_Mach is offline   Reply With Quote
Old 12-04-2018, 09:15 AM   #4
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,159
Re: D1SC issues

go with a slot style maf and move it into the engine bay. Your issue sounds tune related with likely complications from where procharger puts the stock style maf
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 12-05-2018, 09:17 PM   #5
D1SC_Mach
Registered User
 
Join Date: Jul 2018
Location: Eagleville
Posts: 6
Re: D1SC issues

Quote:
Originally Posted by DSG2003Mach1 View Post
go with a slot style maf and move it into the engine bay. Your issue sounds tune related with likely complications from where procharger puts the stock style maf
Thanks, the stalling and hesitation issue just popped up after a new tranzilla transmission, mcleod clutch and flywheel went in. I dont think its related, but the cold weather is prob an issue. when i have some time the next thing i'm going to dig into is the MAF setup, I need to confirm its actually done the way the procharger setup says to with the mesh screen in front. I will also clean it, if that doesn't give me a fix, then its on to the EGR, prob replace the IAC, and maybe do as you suggested go with a diff MAF. Although I would most likely have to have it retuned, but that might not be a bad thing as I might need a summer and winter tune.
D1SC_Mach is offline   Reply With Quote
Old 12-05-2018, 10:27 PM   #6
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,159
Re: D1SC issues

Or send s log to your tuner before pissing away money on random parts
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 12-06-2018, 01:58 PM   #7
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis/Brownsburg, IN
Posts: 2,148
Re: D1SC issues

Also, I wouldn't think it would be necessary for a winter tune, unless you were on E85 or changing gas to a different octane. The ECU should have no prob adjusting to the weather etc.
__________________
  • Azure Blue 04 Mach 1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 12-06-2018, 04:16 PM   #8
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,159
Re: D1SC issues

Quote:
Originally Posted by ab_mach1 View Post
The ECU should have no prob adjusting to the weather etc.
sometimes E85 can be a pain in the *** to get cold start fueling set up correctly but even so, once its set you still only need one e85 tune

the original post wasnt so clear that the issue started after the transmission install. Still not sure how that would cause it though
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 12-06-2018, 06:21 PM   #9
D1SC_Mach
Registered User
 
Join Date: Jul 2018
Location: Eagleville
Posts: 6
Re: D1SC issues

well im not E85, but i need to buy a butt load of gauges since this car came with none...sad, but some people are ok with a tuner saying your all good and trusting that forever.

I may actully do that, once i can data log all the required data and send that off to have it checked.

im sure the idle and hesitation issues are something just acting stupid because of the cold weather.
D1SC_Mach is offline   Reply With Quote
Old 12-07-2018, 05:07 AM   #10
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,822
Re: D1SC issues

Quote:
Originally Posted by D1SC_Mach View Post
refresh my memory HPX?
Slot style MAF, also you may need a MAFia extender, tuner can advise.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 12-07-2018, 10:08 AM   #11
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,159
Re: D1SC issues

Quote:
Originally Posted by not a gt View Post
Slot style MAF, also you may need a MAFia extender, tuner can advise.
an HPX in a tube the same size as the piece coming off the TB won't need a MAFia or anything like that..I've got plenty of head room at 15psi and 700+
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<