2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Fluid Systems (coolant, oil, fuel)

Reply
 
Thread Tools Display Modes
Old 08-03-2014, 02:42 PM   #1
Explosive
Registered User
 
Explosive's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 876
fuel pressure numbers?

What kind of pressure do our cars run at wide open? Going over some nitrous charts listed by fuel pressure
Explosive is offline   Reply With Quote
Old 08-03-2014, 03:35 PM   #2
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: fuel pressure numbers?

Don't quote me, but I want to say around 60 psi, others will chime in. Were you still interested in the tail lights I have??
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 08-03-2014, 03:48 PM   #3
Explosive
Registered User
 
Explosive's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 876
Re: fuel pressure numbers?

I'm interested but an unforeseen cost came so up and I have my axle build and dyno time coming up in. A couple weeks so I'm pinching pennies. I'll let you know if I r nd up wanting them but if someone wants them right now don't hold them on my account thanks
Explosive is offline   Reply With Quote
Old 08-03-2014, 03:55 PM   #4
not a gt
Registered User
 
not a gt's Avatar
 
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
Re: fuel pressure numbers?

Quote:
Originally Posted by Explosive View Post
I'm interested but an unforeseen cost came so up and I have my axle build and dyno time coming up in. A couple weeks so I'm pinching pennies. I'll let you know if I r nd up wanting them but if someone wants them right now don't hold them on my account thanks
They aren't going anywhere, sounds like the build is going nicely, good luck with its completion
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap:
2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear
Tuned by B.Kurgan
601Hp/558/Tq
not a gt is offline   Reply With Quote
Old 08-04-2014, 04:46 PM   #5
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: fuel pressure numbers?

My old nitrous tune was set at 60 psi, this was enough to cover the initial drop in pressure when the 'wet' part of the nitrous kit started to flow the fuel. Before for I took it to 60, it dropped pretty low but only for a second. 60 psi solved the drop into the danger zone.

I run ~53psi on my turbo build.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 08-04-2014, 10:57 PM   #6
Explosive
Registered User
 
Explosive's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 876
Re: fuel pressure numbers?

Thanks, interesting as the NX jet chart for 4v mustang was showing 45 if I recall. But I'd rather find what I'm actually running and jet off that
Explosive is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<