2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "Show" Discussions > Mach 1 Specific Event(s)

Mach 1 Specific Event(s) Specific Registry/Mach 1 Events

Reply
 
Thread Tools Display Modes
Old 02-07-2008, 02:47 PM   #1
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
***Cancelled*** 2nd Annual 03-04 Mach 1 Showdown Event

2nd Annual 03-04 Mach 1 Showdown


This is the 2nd annual Showdown event for 03-04 Mach 1's with a modular motor DOHC 4.6l or 5.4l motors. The event will be held on September 18th, 2008 from 9:00am - 5:00pm at Summit Racing Motorsports Park located in Norwalk, Ohio. All 03-04 Mach 1’s entering to run event class/classes must be street registered & street licensed according to your state requirements. The fee per 03-04 Mach 1 class entry drivers will be a pre-paid $125 ea, which includes all open track time and the evening cook out, bon fire get together. You can run more then 1 class for 1 entry fee as long as your Mach is within the rules of each class, no exceptions. This will be a cash payout to winner/runner-up of each class, the amount will be determined based on class entries. Maximum Motorsports $50 gift certificate for each class winner. CRT Performance Trophies for all class winner/runner-up, including trophy for quickest ET Mach & fastest MPH Mach during the showdown class eliminations.

This event will have the works including a full team of track officials to operate/control tech inspection for 03-04 Mach 1 class racers, the staging lanes, starting tree, water box, ET booth, track sprayed & prepped twice. The tower will be operational with PA system. Additional commendations open on the track premises will be the concession stand, Sunoco fuel pumps, PDI nitrous filling station, Harlow tire shop, along with excellent lavatory facilities. There will be special guests/sponsors in the Mustang world attending this event.

This event will be open to all Ford Mustangs during open track. Open track will be from 9:00am - 1:00pm. The 03-04 Mach 1 Showdown classes will start at 1:30pm and last about 2 hrs. Then open track will resume until 5:00pm. Fee for all open track Ford Mustang participants only, will be a pre-paid $40 ea. All open track Mustang participants are invited/welcome to attend the evening cook out, bon fire get together.

Sponsors and special guests attending so far. Norwalk, Ohio owners/racers, Jeff & Tammy Chambers of CRT Performance. Jeff is our biggest sponsor and takes care of racers that break at the track. Their performance shop is located 2 miles from the track. They also host the evening cook out & bon fire on their 5 acre home property. Jeff Chambers is also a NASA Engineer at Glenn Research center. Paul Sviniki out of Michigan owner of Paul's High Performance shop 2nd year as a sponsor attending. Lidio Iacobelli out of Michigan owner of Alternative Performance INC, attending 2nd year as driver. Scott Hoag (Ford Project Designer of the 03-04 Mach 1) 2nd year attending out of Michigan, now owner of Mustang Racing Technologies as sponsor. Joe Heck Racing out of New Jersey 1st year sponsor. Maximum Motorsports 1st year sponsor. Dave Wagner founder of the Mach 1 Registry attending 2nd year and sets up as vendor/sponsor for Mach 1 products & apparel. Jeff Schmell NMRA Factory Stock runner-up 2 yrs in a row will be racing his 2nd year at this event. Brian Marr NMRA racer in Factory Stock will be driving 1st year. Bob Cosby was our official tech inspector and staging lanes official in 2007, he hopes to return this year. Bob was the 2004 NMRA Factory Stock champ in 2004. He is also a Lt. Commander in the Navy at Norfolk, VA retiring this year. Also, Evan J. Smith (Chief editor of Muscle Mustangs & Fast Fords) advised me he will do what he can for magazine coverage for this years event. Josh Klugger (http://www.mach1registry.org/forums/...ostcount=1NMRA) Street Radial class advised me he will attend and race this year.




03-04 Mach 1 Classes


There will be 6 classes. First 5 classes are heads up using a .500 Pro Tree. After the heads up classes are complete, the 6th and final class to run will be a bracket class. This will be a standard Sportsman .500 tree.

The 6 classes are as follows:

1. Factory Mach - N/A 4.6l DOHC Factory Motor Only! Street tire/drag radials only. Factory style 17" or larger wheels only, no front skinnies. Factory or aftermarket full exhaust, shorty headers, mid length headers OK. Basic engine external bolt ons (no ported intake), intake spacer OK. Electric water pump OK. Factory transmissions only, strengthening mods to manual or auto transmissions OK, (example: 26 spline input shaft OK). Factory auto trans only, aftermarket converter OK. Any rear gear ratio OK. No 2 step, no trans brake. Aftermarket shifter OK, aftermarket clutch OK. Aluminum flywheel OK. Factory style suspension front & back, example: No tubular K-member or tubular A arms. Aftermarket rear upper/lower control arms OK. Aftermarket front/rear shocks OK. Removing front sway bar OK. Aftermarket full/standard sub-frames OK. Lowering springs OK. Custom tunes OK. Must have full interior, must have passenger seat, factory style brakes, any Driveshaft.

2. Modified Mach- N/A 4.6l DOHC Factory Long Block Only! Ported intake OK, aftermarket intake OK, intake spacers OK. Anything else goes!

3. Super Mach - N/A 4.6l DOHC or 5.4l DOHC Motor Only! Anything else goes!

4. Power Mach - 4.6l DOHC Factory Long Block with One Power Adder Only! Ported intake OK, aftermarket intake OK, intake spacers OK. Anything else goes!

5. Ultimate Mach- 4.6l DOHC or 5.4l DOHC Motor Only! Any power adder or combination of power adders. Anything else goes!

6. Bracket Mach - All classes can run in this bracket class showdown

Guys running nitrous can run one of the N/A classes also. Bottles will be checked so that the supply line is disconnected.

Summit Motorsports Park will allow anyone attending this event to stay/camp overnight Wednesday night for a fee of $12 and Thursday night free.

If interested in entering classes or just running during open track, please contact me, (Phil Bastian) at pbastian@adelphia.net or contact me thru the Mach 1 Registry (screen name Phil) at http://www.mach1registry.org/forums.

For additional information, lodging, itinerary, pre-payment of driver fees and so on, please monitor the Mach 1 Registry for continued updates and listings of all who are attending.

RULES AND INFORMATION LISTED ARE SUBJECT TO CHANGE PRIOR TO OR ON THE DAY OF THIS EVENT.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/

Last edited by Phil; 06-10-2008 at 09:15 AM.
Phil is offline   Reply With Quote
Old 02-07-2008, 04:12 PM   #2
GRB60
Registered User
 
GRB60's Avatar
 
Join Date: Feb 2004
Location: Harleysville, PA
Posts: 2,145
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Looks like you've about got it covered, Phil! Nice job.
__________________
2003 Torch Red 5 spd w/ IUP
Built: 7/16/03
GRB60 is offline   Reply With Quote
Old 02-08-2008, 01:26 AM   #3
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by GRB60 View Post
Looks like you've about got it covered, Phil! Nice job.
Thanks, I hope you can make it.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-08-2008, 10:56 AM   #4
wigsite
Registered User
 
wigsite's Avatar
 
Join Date: Jul 2004
Location: Delaware, Ohio
Posts: 1,495
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Phil View Post
along with excellent lavatory facilities.
Guys, the bathrooms alone are worth the cost of admission. There is a guy that actually gives you a towel and a splash of Polo for a buck. Seriously, I hope everyone gives thought to attending. It will be alot of fun.
__________________
Borla catback
BBK LT's/ catted mid
JLT RAI..4.10..Moser 28 spline..UPR u/l
Dyno tuned by CRT Performance
Pro 5.0 Power Tower shifter
best 1/4 12.62 @ 108.05 mph
313 RWHP..330 TQ
wigsite is offline   Reply With Quote
Old 02-08-2008, 03:41 PM   #5
02mach1
Cofounder in Memoriam 1967-2012
 
02mach1's Avatar
 
Join Date: Aug 2002
Location: Hurricane,WV
Posts: 11,826
Re: 2nd Annual 03-04 Mach 1 Showdown Event

This year will be bigger,
__________________
1989 LX 25thAnniv.Mustang
1999 35th Anniv.
Mustang 2003 Azure Blue Auto. MACH1
VIN#1FAFP42R83F366627
production 12/2/02-
Build 12/6/02
Delivered home 12/16/02

Founder of Intl.SN95LMMOCR for all 79-05 Mustangs 1st Late Model Mustang Club since 1993
C/O Founder of Mach1 Registry
AIM Shows
MCA #29082,MCA Judge for 79-04 Mustangs
www.mustang.org
MACH1REGISTRY Member#2

_______________________
Intl.SN95 Late Model Mustang Owners Club & Registry
Vote for the Intl.SN95 Late Model Mustang Owners Club and Registry on Stangnet here.
1st Mach1 in the State of WV
Here's pics of my Mach1
http://mach1registry.org/photopost/d...mach2.JPG?6804
02mach1 is offline   Reply With Quote
Old 02-09-2008, 01:18 AM   #6
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by 02mach1 View Post
This year will be bigger,
I hope you will be here Frank!!!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-09-2008, 01:27 AM   #7
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by wigsite View Post
Guys, the bathrooms alone are worth the cost of admission. There is a guy that actually gives you a towel and a splash of Polo for a buck. Seriously, I hope everyone gives thought to attending. It will be alot of fun.

LOL!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-09-2008, 02:21 AM   #8
Big Datty
FASTEST MACH ON PLANET
 
Big Datty's Avatar
 
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
Re: 2nd Annual 03-04 Mach 1 Showdown Event

I can't wait, is wild Bill coming?????
__________________
Possibly the highest hp 4.6 on the registry?
Marco Abruzzi turbo 400 tranny

tilt, cruise, air, full interior street car
Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm
newest member of the 1000 hp club!
2008 Mach1 shootout Ultimate Mach class winner

Cool vid goin 9.20's and beatin it on the street
http://www.youtube.com/watch?v=ziYRp9JgzLo


All on a TRUE 281 cubic inch engine.
Big Datty is offline   Reply With Quote
Old 02-12-2008, 11:09 AM   #9
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

I just picked up Maximum Motorsports as a sponsor for our event.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-12-2008, 05:38 PM   #10
Big Datty
FASTEST MACH ON PLANET
 
Big Datty's Avatar
 
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Phil View Post
I just picked up Maximum Motorsports as a sponsor for our event.


Holy CRAP!!! You da man PHIL!!!
__________________
Possibly the highest hp 4.6 on the registry?
Marco Abruzzi turbo 400 tranny

tilt, cruise, air, full interior street car
Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm
newest member of the 1000 hp club!
2008 Mach1 shootout Ultimate Mach class winner

Cool vid goin 9.20's and beatin it on the street
http://www.youtube.com/watch?v=ziYRp9JgzLo


All on a TRUE 281 cubic inch engine.
Big Datty is offline   Reply With Quote
Old 02-12-2008, 08:44 PM   #11
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Big Datty View Post
Holy CRAP!!! You da man PHIL!!!
I wish Craig!

It's not easy trying to gather up sponsors. They can back out just like people, that are interested in entering our showdown event. I thought JEGS was with us and then they backed out.

I just keep pluging away. Here is a link to a new sponsor, Joe Heck Racing out of New Jersey. Their opening up a 2nd shop.

http://www.joeheckracing.com/
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-13-2008, 11:36 PM   #12
02mach1
Cofounder in Memoriam 1967-2012
 
02mach1's Avatar
 
Join Date: Aug 2002
Location: Hurricane,WV
Posts: 11,826
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Phil View Post
I hope you will be here Frank!!!
I'll be there ,
__________________
1989 LX 25thAnniv.Mustang
1999 35th Anniv.
Mustang 2003 Azure Blue Auto. MACH1
VIN#1FAFP42R83F366627
production 12/2/02-
Build 12/6/02
Delivered home 12/16/02

Founder of Intl.SN95LMMOCR for all 79-05 Mustangs 1st Late Model Mustang Club since 1993
C/O Founder of Mach1 Registry
AIM Shows
MCA #29082,MCA Judge for 79-04 Mustangs
www.mustang.org
MACH1REGISTRY Member#2

_______________________
Intl.SN95 Late Model Mustang Owners Club & Registry
Vote for the Intl.SN95 Late Model Mustang Owners Club and Registry on Stangnet here.
1st Mach1 in the State of WV
Here's pics of my Mach1
http://mach1registry.org/photopost/d...mach2.JPG?6804
02mach1 is offline   Reply With Quote
Old 02-15-2008, 10:45 PM   #13
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Maximum Motorsports will be giving $300 in gift certificates. Along with Maximum Motorsports FLEXFIT Hats and License Plate Frames in addition to some other MM goodies!

There for, I have advised MM for (6) $50 gift certificates for winners of each class.

There will be cash (to be determined) & trophies for each class winner/runner-up and $50 Maximum Motorsports gift certificate for each class winner.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-22-2008, 04:48 PM   #14
Prcusion21
Zinc Yellow Baby
 
Prcusion21's Avatar
 
Join Date: Jun 2007
Location: Hartville, Ohio
Posts: 34
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Do I have to pay if I just drive the Mach out there and not want to race?
__________________
www.buckeyestangs.com
Prcusion21 is offline   Reply With Quote
Old 02-22-2008, 06:36 PM   #15
4V FURY
Lite Poster
 
4V FURY's Avatar
 
Join Date: Mar 2004
Location: ohio
Posts: 1,381
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Phil View Post
I thought JEGS was with us and then they backed out.
[/url]

it just hit me........a jegs sponsored event at summit raceway? you are a silly man lol.
__________________
SOLD COMPETITION ORANGE 04 MACH1

Naturally Aspirdated

Boss330 heads/cams/intake + VT 324" shortblock

11.34 @ 125.62 on ET streets

CRT-PERFORMANCE tuned


Congrats to Redliner who has taken it to a best ET of 10.97 @ 124
4V FURY is offline   Reply With Quote
Old 02-22-2008, 07:07 PM   #16
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Prcusion21 View Post
Do I have to pay if I just drive the Mach out there and not want to race?
No, it won't cost you anything to come on out and watch or show off your Mach 1 or Mustang.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-22-2008, 07:12 PM   #17
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by 4V FURY View Post
it just hit me........a jegs sponsored event at summit raceway? you are a silly man lol.
You laugh Bill, but the store manager said yes to sponsor us. Until it went before their review board and then the answer was no. It was worth a shot at it.. I asked Summit Racing Equipment first and they flat out said no.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-22-2008, 07:31 PM   #18
Big Datty
FASTEST MACH ON PLANET
 
Big Datty's Avatar
 
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Prcusion21 View Post
Do I have to pay if I just drive the Mach out there and not want to race?

Yes, because those of you sissies that choose to drive there but not race have to forfeit your keys to the ol BIG DADDY here and I will then throw your Mach the proper beating it was born to do!
__________________
Possibly the highest hp 4.6 on the registry?
Marco Abruzzi turbo 400 tranny

tilt, cruise, air, full interior street car
Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm
newest member of the 1000 hp club!
2008 Mach1 shootout Ultimate Mach class winner

Cool vid goin 9.20's and beatin it on the street
http://www.youtube.com/watch?v=ziYRp9JgzLo


All on a TRUE 281 cubic inch engine.
Big Datty is offline   Reply With Quote
Old 02-23-2008, 09:42 PM   #19
Prcusion21
Zinc Yellow Baby
 
Prcusion21's Avatar
 
Join Date: Jun 2007
Location: Hartville, Ohio
Posts: 34
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Sorry man! lol the old man and I are keeping his Mach as a collector's car.

If we can bring any ol Mustang to show off, I might bring our little 92 as well. We'll see when the day comes.

Peace
__________________
www.buckeyestangs.com
Prcusion21 is offline   Reply With Quote
Old 02-23-2008, 11:40 PM   #20
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Prcusion21 View Post
Sorry man! lol the old man and I are keeping his Mach as a collector's car.

If we can bring any ol Mustang to show off, I might bring our little 92 as well. We'll see when the day comes.

Peace

Hope to see you at this event!!!!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 02-24-2008, 03:29 PM   #21
Big Datty
FASTEST MACH ON PLANET
 
Big Datty's Avatar
 
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Prcusion21 View Post
Sorry man! lol the old man and I are keeping his Mach as a collector's car.

If we can bring any ol Mustang to show off, I might bring our little 92 as well. We'll see when the day comes.

Peace

Don't blame ya man! I wish sometimes that I wouldn't have taken the rarest color and did what I did to it. I need two Machs!
__________________
Possibly the highest hp 4.6 on the registry?
Marco Abruzzi turbo 400 tranny

tilt, cruise, air, full interior street car
Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm
newest member of the 1000 hp club!
2008 Mach1 shootout Ultimate Mach class winner

Cool vid goin 9.20's and beatin it on the street
http://www.youtube.com/watch?v=ziYRp9JgzLo


All on a TRUE 281 cubic inch engine.
Big Datty is offline   Reply With Quote
Old 03-02-2008, 05:20 PM   #22
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

I truely hope we can get 30+ 03-04 Mach 1's at this event. I know we will have 30+ Mustangs running open track, lets not be shown up at our own event.

I'm counting on you guys and hopefully a few gals that own 03-04 Mach 1's will enter the showdown classes.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 03-02-2008, 05:21 PM   #23
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Big Datty View Post
Don't blame ya man! I wish sometimes that I wouldn't have taken the rarest color and did what I did to it. I need two Machs!
Craig,

I hear you on that note!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 03-02-2008, 06:01 PM   #24
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,248
Re: 2nd Annual 03-04 Mach 1 Showdown Event

Quote:
Originally Posted by Mach1Marauder View Post
I think I'm gonna run the event on DOT tires.
That's fine! Hoosier QTP are awesome! I Just hope you will be at this event.
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeletemanifolds.com/

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 03-02-2008, 10:21 PM   #25
Big Datty
FASTEST MACH ON PLANET
 
Big Datty's Avatar
 
Join Date: Jun 2004
Location: Youngstown, Ohio
Posts: 404
Re: 2nd Annual 03-04 Mach 1 Showdown Event

I'm getting 1.32-1.34 60' times on my dot's.
__________________
Possibly the highest hp 4.6 on the registry?
Marco Abruzzi turbo 400 tranny

tilt, cruise, air, full interior street car
Dyno pull http://videos.streetfire.net/video/B...ach_723489.htm
newest member of the 1000 hp club!
2008 Mach1 shootout Ultimate Mach class winner

Cool vid goin 9.20's and beatin it on the street
http://www.youtube.com/watch?v=ziYRp9JgzLo


All on a TRUE 281 cubic inch engine.
Big Datty is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<