FS: 03 Mach1, Yellow; 2.1L KenneBell, VA - 2003-04 Mach 1 Registry Owners Club

robjr67 · 03-12-2008, 10:47 AM

I just recently got a GT500, so the Mach1 has to go. If you know anyone looking for a very clean Mach1 with these types of mods that runs 11.8@125 on DR and gets 24 mpg on the highway let me know. E-mail for more or larger pics. Thanks,

Asking $22,499

LISTED ON E-BAY..

http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=016

Below is some information about it:

2003 Zinc (Second rarest color - 869) Ford Mach1 Mustang with very low mileage (19,500mi) Super clean and garaged kept all it's life. Never been wrecked and non-smoker car. Only been caught in the rain twice. Mach1 has a 2.1L Kenne Bell supercharger with 90mm MAF, FMS Cobra 39lb injectors, Kenne Bell Boost-a-Pump that has been professionally tuned with a SCT chip. Dyno'd 455rwhp & 372rwtq @ 8lb of boost with conservative tune @11.7 A/F ratio. Also has "Mach1" coil covers

It has FMS 4.10 gears with UPR upper & Lower control arms, Eibach drag launch springs and MAC girdle. 10.5' Mach1 deepdish with 315/40/17 Nitto Drag Radials. Magna flow 2.5" cat-back with 3" tips and UPR X-pipe. On the inside it has a Pro 5.0 shifter, dual pod with Auto-Meter boost and A/F gauges. Billet ring, cup holder and instrument panel rings with tinted windows with rear Mach1 honey comb insert.

Have alot of $$$ invested, you can't build or find a cleaner low mileage Mach1 like this any cheaper.

Give me a call at 540-446-1149 or e-mail if you have any questions. Thanks,

cobramach1 · 03-12-2008, 11:02 AM

I can understand why you're selling!

Good luck with the sale.

robjr67 · 03-12-2008, 07:53 PM

Thanks for the compliment! Yes, you have to take that into consideration when putting mods on a car, then selling it. It's a clean low mile Mach1 that runs great and is faster than my GT500, for now. Its a very fair price for what I have in it. It will make someone a very happy Mach1 owner.

Slimcowboy · 03-14-2008, 01:01 PM

I'm interested in your car. my mach just got totaled due to young inexperienced driver that pulled out in front of me. i need another mach asap.
would love pics and details.

slimcowboy@clearviewcatv.net
410-274-0757
Brendan Wise

3150Mach1 · 03-14-2008, 01:26 PM

Quote:

Originally Posted by Slimcowboy

I'm interested in your car. my mach just got totaled due to young inexperienced driver that pulled out in front of me. i need another mach asap.
would love pics and details.

slimcowboy@clearviewcatv.net
410-274-0757
Brendan Wise

I have see this Mach in the flesh and it is sweet. Wish I could afford a second one cause this would be it. It is worth every penny he is asking.

robjr67 · 03-14-2008, 11:17 PM

PM and e-mail sent. Thanks,

3150Mach1 · 03-17-2008, 02:13 PM

Will someone please buy this car before I take a second mortgage to buy it. This is a showroom quailty car and has a KB to boot.

cobramach1 · 03-17-2008, 02:28 PM

Quote:

Originally Posted by 03Mach150BP

Will someone please buy this car before I take a second mortgage to buy it. This is a showroom quailty car and has a KB to boot.

yeah, the kb's make the under hood look so clean. i think that's why i like the gt500 so much too. it's just very clean and uncluttered under the hood.

robjr67 · 03-17-2008, 08:33 PM

Quote:

Originally Posted by cobramach1

yeah, the kb's make the under hood look so clean. i think that's why i like the gt500 so much too. it's just very clean and uncluttered under the hood.

Thanks for the compliments! Your making this harder!...

But, easier for the next owner!

cobramach1 · 03-18-2008, 10:11 AM

Quote:

Originally Posted by robjr67

Thanks for the compliments! Your making this harder!...

But, easier for the next owner!

Sorry bout that! I was talking to my wife last night about taking the Mach 1 to a dyno for a base run since it's virtually stock and we got on the subject of a shop up here that had a kenne bell supercharger on a Mach 1 that was making nearly 600hp. Then she said, we should probably get one of those for your Mach 1 someday. She's awesome! I reminded her that I wanted twin turbo's but I said that it would probably be easier to install and tune the supercharger! I'll take either at this point, but we are just waiting till the car's paid off is all. Not even sure it will happen then because I have too many other projects I'd rather get to.

robjr67 · 03-19-2008, 09:40 AM

Quote:

Originally Posted by cobramach1

Sorry bout that! I was talking to my wife last night about taking the Mach 1 to a dyno for a base run since it's virtually stock and we got on the subject of a shop up here that had a kenne bell supercharger on a Mach 1 that was making nearly 600hp. Then she said, we should probably get one of those for your Mach 1 someday. She's awesome! I reminded her that I wanted twin turbo's but I said that it would probably be easier to install and tune the supercharger! I'll take either at this point, but we are just waiting till the car's paid off is all. Not even sure it will happen then because I have too many other projects I'd rather get to.

No problem..! Sounds like you have a very supportive wife...

I've had this setup for over 2years now, and I'm very pleased with the KB 2.1L. Installation was straight forward with very detailed easy to follow instructions. More importantly, Jim and James at KB provide awesome customer service. Another good thing is that the blower has plenty of room to grow (up to 18psi) if anyone decides to build the bottom end in the future. Wish ya good luck with your other projects...!

robjr67 · 03-29-2008, 08:33 PM

$22,900 OBO

robjr67 · 04-01-2008, 07:45 AM

Quote:

Originally Posted by robjr67

$22,900 OBO

Bump - Price Lowered...!

$22, 500 OBO

Super clean and fast Mach1 -

You won't be let down...!

blachatch · 04-01-2008, 10:39 AM

Such a nice car i cant believe it hasnt sold yet..

robjr67 · 04-01-2008, 08:26 PM

Quote:

Originally Posted by 03Mach150BP

I did not notice. Whats your asking price??????

Hey, congrats on your 11.98...!!! Nice run! Good meeting you this past weekend!

Take care,

robjr67 · 04-10-2008, 09:17 PM

Quote:

Originally Posted by robjr67

Bump - Price Lowered...!

$22, 500 OBO

Super clean and fast Mach1 -

You won't be let down...!

Bumping...Taking offers...

robjr67 · 04-16-2008, 09:59 PM

Quote:

Originally Posted by LOOKnGO

Bump Up for the BEST DEAL!!!

Thanks! .... PRICE LOWERED ON E-BAY

http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=016

robjr67 · 04-17-2008, 07:57 PM

Quote:

Originally Posted by LOOKnGO

Drive that beast up to the car show at Front Royal Shenandoah ford this weekend, and maybe you will get a bite. SPRING IS HERE!

Wish I could, but I won't be able to make it this weekend! Thanks!

AzureMach1auto · 04-22-2008, 07:51 AM

I live near you. Nice car.

I think I saw your GT500 at MBES this month.

nasty04mach1 · 04-22-2008, 01:08 PM

Nice Mach man. Good Luck with the sael I am suprised no one has bought it

robjr67 · 04-22-2008, 02:19 PM

Appreciate both of your comments! It will sell in time. Someone will be very happy when they do....!

It has about a day left on e-bay. We'll see what happens.

http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m32

mikeofwarr · 04-23-2008, 09:02 PM

Nice Mach, the auction is down to the last few minutes, wonder if there will be any last minute bidding, good luck!

beerformeplz · 04-23-2008, 09:19 PM

Wow thats scary, didnt even break 17k.

robjr67 · 04-24-2008, 09:57 PM

Hey, thanks for the support. Guess it will sit in the garage for a little while longer for $17k...

All I can say is people bidding really didn't want a Mach1 with a blower..!?!

My reserve was $21,800...

I will try it again another day....

Lonestar7 · 04-25-2008, 12:38 AM

You have a nice Mach its the economy right now. When the economy comes back so will buyers. Just how long its going to take know one knows.

LS

03-12-2008, 10:47 AM	#1
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	FS: 03 Mach1, Yellow; 2.1L KenneBell, VA I just recently got a GT500, so the Mach1 has to go. If you know anyone looking for a very clean Mach1 with these types of mods that runs 11.8@125 on DR and gets 24 mpg on the highway let me know. E-mail for more or larger pics. Thanks, Asking $22,499 LISTED ON E-BAY.. http://cgi.ebay.com/ebaymotors/ws/eB...MESE:IT&ih=016 Below is some information about it: 2003 Zinc (Second rarest color - 869) Ford Mach1 Mustang with very low mileage (19,500mi) Super clean and garaged kept all it's life. Never been wrecked and non-smoker car. Only been caught in the rain twice. Mach1 has a 2.1L Kenne Bell supercharger with 90mm MAF, FMS Cobra 39lb injectors, Kenne Bell Boost-a-Pump that has been professionally tuned with a SCT chip. Dyno'd 455rwhp & 372rwtq @ 8lb of boost with conservative tune @11.7 A/F ratio. Also has "Mach1" coil covers It has FMS 4.10 gears with UPR upper & Lower control arms, Eibach drag launch springs and MAC girdle. 10.5' Mach1 deepdish with 315/40/17 Nitto Drag Radials. Magna flow 2.5" cat-back with 3" tips and UPR X-pipe. On the inside it has a Pro 5.0 shifter, dual pod with Auto-Meter boost and A/F gauges. Billet ring, cup holder and instrument panel rings with tinted windows with rear Mach1 honey comb insert. Have alot of $$$ invested, you can't build or find a cleaner low mileage Mach1 like this any cheaper. Give me a call at 540-446-1149 or e-mail if you have any questions. Thanks, Attached Thumbnails __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq Last edited by robjr67; 04-16-2008 at 09:57 PM.

03-12-2008, 11:02 AM	#2
cobramach1 Fear begins with 'FE' Join Date: Jun 2007 Location: Orion Twp, MI Posts: 1,930	Re: 03 Mach1 (Zinc); 2.1L KB I can understand why you're selling! Good luck with the sale. __________________ '08 Shelby GT500 Black w/Alloy stripes '02 F250 Super Duty, 7.3L Power Stroke, 4x4, Extended Cab, Long Bed '70 Mach 1 Yellow/Black interior, 427 Medium Riser FE, Manual C6 '70 Mach 1 White/Vermillion interior, 351C 2v, Auto, A/C, needs restoration '70 Mach 1 Calypso Coral/Black interior, 351C 4v, Auto, very rusty parts car '69 Mach 1 Indian Fire Red/Black interior, R code 428CJ, 4spd, needs restoration

03-12-2008, 07:53 PM	#3
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	Re: 03 Mach1 (Zinc); 2.1L KB Thanks for the compliment! Yes, you have to take that into consideration when putting mods on a car, then selling it. It's a clean low mile Mach1 that runs great and is faster than my GT500, for now. Its a very fair price for what I have in it. It will make someone a very happy Mach1 owner. __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq

03-14-2008, 01:01 PM	#4
Slimcowboy Registered User Join Date: Mar 2008 Location: Harford County, MD Posts: 13	Re: 03 Mach1 (Zinc); 2.1L KB I'm interested in your car. my mach just got totaled due to young inexperienced driver that pulled out in front of me. i need another mach asap. would love pics and details. slimcowboy@clearviewcatv.net 410-274-0757 Brendan Wise

03-14-2008, 11:17 PM	#6
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	Re: 03 Mach1 (Zinc); 2.1L KB PM and e-mail sent. Thanks, __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq

03-17-2008, 02:13 PM	#7
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Re: 03 Mach1 (Zinc); 2.1L KB Will someone please buy this car before I take a second mortgage to buy it. This is a showroom quailty car and has a KB to boot. __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt

03-29-2008, 08:33 PM	#12
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA $22,900 OBO __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq

04-01-2008, 10:39 AM	#14
blachatch Registered User Join Date: Jun 2007 Location: hudson,ohio Posts: 29	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Such a nice car i cant believe it hasnt sold yet..

04-22-2008, 07:51 AM	#19
AzureMach1auto Registered User Join Date: Jan 2007 Location: Stafford, VA Posts: 802	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA I live near you. Nice car. I think I saw your GT500 at MBES this month. __________________ '03 Azure Mach 1: auto., IUP, JLT CAI. BUILD DATE:02/03/2003 Purchased: 01/02/07 '94 Mitsubishi 3000GT SL: 5-speed '87 IROC-Z: Crate 320rwhp Vortec T.P.I., many mods

04-22-2008, 01:08 PM	#20
nasty04mach1 FOR SALE!!! Join Date: Jan 2008 Location: Middle, GA Posts: 1,163	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Nice Mach man. Good Luck with the sael I am suprised no one has bought it __________________ '04 Mach gone but will be never forgotten 12/03/08

04-22-2008, 02:19 PM	#21
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Appreciate both of your comments! It will sell in time. Someone will be very happy when they do....! It has about a day left on e-bay. We'll see what happens. http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m32 __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq

04-23-2008, 09:02 PM	#22
mikeofwarr AKA: Rare Pony & Ole Pony Join Date: Sep 2006 Location: Warrenton, VA Posts: 1,304	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Nice Mach, the auction is down to the last few minutes, wonder if there will be any last minute bidding, good luck! __________________ MCA Member 61444 AKA: OLE PONY & RARE PONY Currently our garage/driveway includes the following: 1973 Mustang Convert - I Bought in 1974 - Still have it! 2004 Mach 1 Oxford White Auto - Born on March 24th, 2004 - Still have it! 2004 Mach 1 Azure Blue Auto - My stepsons, sold April 2016 2001 Mustang Bullitt - Dark Highland Green , My Sons, Bought It Sept 29th, 07

04-23-2008, 09:19 PM	#23
beerformeplz Roll Tide ! Join Date: May 2004 Location: Richmond Posts: 2,491	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Wow thats scary, didnt even break 17k. __________________ "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not. " - Thomas Jefferson

04-24-2008, 09:57 PM	#24
robjr67 2003 Mach 1 Join Date: Jan 2005 Location: Stafford, VA Posts: 55	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA Hey, thanks for the support. Guess it will sit in the garage for a little while longer for $17k... All I can say is people bidding really didn't want a Mach1 with a blower..!?! My reserve was $21,800... I will try it again another day.... __________________ 2007 Shelby GT500 = 11.74@124.40 (20" Razors) 510rwhp; 493rwtq 1966 Mustang Coupe 1987 Coupe = 11.65@119.26 (M/T Drag Radial) A-trim @ 7psi: 379rwhp; 388rwtq * SOLD * 2003 Mach 1 = 11.87@125.42 (Nitto's) 2.1KB @ 8psi (NIC): 455rwhp; 372rwtq - 11.7 A/F 12.6@108.97 (Nitto's) * SOLD * N/A: 294rwhp; 324rwtq

04-25-2008, 12:38 AM	#25
Lonestar7 Guest Join Date: Apr 2007 Location: Denver, CO Posts: 3,152	Re: FS: 03 Mach1, Yellow; 2.1L KenneBell, VA You have a nice Mach its the economy right now. When the economy comes back so will buyers. Just how long its going to take know one knows. LS

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)