Oil in pcv valve - 2003-04 Mach 1 Registry Owners Club

Davidw04 · 03-18-2018, 07:33 PM

I just replaced my pcv valve and I found pooled up oil in it which is why I am thinking my car smoke occasionally on start up. I am going to add an oil separator. What’s the best way to get the oil out of the intake manifold without taking it off the car?

DSG2003Mach1 · 03-18-2018, 09:06 PM

It really doable, you could pull the lid and wipe it down with a paper towel I guess

Well, I suppose there’s also seafoam if you can get it into the upper intake

03-18-2018, 07:33 PM	#1
Davidw04 Registered User Join Date: Jun 2015 Location: East haven ct Posts: 36	Oil in pcv valve I just replaced my pcv valve and I found pooled up oil in it which is why I am thinking my car smoke occasionally on start up. I am going to add an oil separator. What’s the best way to get the oil out of the intake manifold without taking it off the car?

03-18-2018, 09:06 PM	#2
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Oil in pcv valve It really doable, you could pull the lid and wipe it down with a paper towel I guess Well, I suppose there’s also seafoam if you can get it into the upper intake __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)