2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "Show" Discussions > Accessories - Non Performance type add-ons

Accessories - Non Performance type add-ons Found any cool accessories for your Mach 1? NON Performance add-ons.

Reply
 
Thread Tools Display Modes
Old 07-07-2017, 09:49 PM   #1
TheBahnBurner
Registered User
 
TheBahnBurner's Avatar
 
Join Date: Sep 2016
Location: Milford
Posts: 8
Mach 460 System Replacement

Hey guys, I finally pulled the trigger on the following items to replace my tired Mach 460 items. The guys at Crutchfield were very happy to help.
120725512 Metra 72-5512 Speaker Harness 2
109STAGE8 JBL Stage 8602 2
613X8015 Kenwood X801-5 (Refurbished) 1
158XAV651B Sony XAV-W651BT 1
120AFDI5V Metra AFDI-5V 12V-5V Converter 1
120955026 Ford Kit 1
120705701 Metra 70-5701 Wire Harness 1
007CPER417 Crutchfield 4 Channel 17 ft 1
007CK4 Crutchfield Amp Wiring Kit 1
0000190009 Crutchfield MasterSheet™ - FORD MUSTANG

Got all of it for 550 bucks after some discounts. I was wondering if anyone else has used the factory wiring to operate aftermarket components? I plan on removing the factory amps and mounting the Kenwood unit in place while retaining the factory wiring.
TheBahnBurner is offline   Reply With Quote
Old 07-10-2017, 06:17 PM   #2
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Mach 460 System Replacement

Quote:
Originally Posted by TheBahnBurner View Post
Hey guys, I finally pulled the trigger on the following items to replace my tired Mach 460 items. The guys at Crutchfield were very happy to help.
120725512 Metra 72-5512 Speaker Harness 2
109STAGE8 JBL Stage 8602 2
613X8015 Kenwood X801-5 (Refurbished) 1
158XAV651B Sony XAV-W651BT 1
120AFDI5V Metra AFDI-5V 12V-5V Converter 1
120955026 Ford Kit 1
120705701 Metra 70-5701 Wire Harness 1
007CPER417 Crutchfield 4 Channel 17 ft 1
007CK4 Crutchfield Amp Wiring Kit 1
0000190009 Crutchfield MasterSheet™ - FORD MUSTANG

Got all of it for 550 bucks after some discounts. I was wondering if anyone else has used the factory wiring to operate aftermarket components? I plan on removing the factory amps and mounting the Kenwood unit in place while retaining the factory wiring.
You will need to use the wiring to the 2.5 inch speakers as the wiring to the 5x7s is for the 'MONO Subwoofer' channel. the 2.5" speakers are driven by the head unit while the 5x7s are driven by the amps. Again, the amps all work in 'mono' and at low frequency. Before I used an amplifier, I installed Infinity 5x7 separates in the doors and rear package tray. They came with a passive crossover, I wired the head unit to power the 2.5" wires, those wires to the passive crossover then new wires from the crossover to the tweeter and 5x7 speakers.

I had an amp for the sub. It sounded pretty good, but, later I added a 4 channel amp for the door and rear tray speakers and ran new speaker wire.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 07-10-2017, 06:28 PM   #3
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Mach 460 System Replacement

I see what you are doing now; RCAs to the 5 channel amp, then use the factory wiring for the 5x7s, however I am not sure how well that will work with the odd wiring of the mustang's 5x7 speakers.

I do not see in your list a converter plug for the output of the factory amps to the speakers, that would utilize your factory wiring. Personally, it really is not hard to run new speaker wires.

Also, if you are swapping out the head unit and the amps, why do you need the 12v to 5v converter?
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<