|
|
Photo Gallery | $ Donations $ | Register | FAQ | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
Car Shows, Cruises & Get Togethers List & Plan Shows, meets and cruises here. Both Regional & national. |
|
Thread Tools | Display Modes |
05-13-2008, 05:04 PM | #1 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Crab run - to North East, MD
Are we doin 1 this year?? Did I miss the post? All I can say about it at this point is I'm racin 24/25May and every 2 weeks after for 9 weeks. If we can squeeze 1 in somewhere in the middle of that, I'd be happy.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
05-13-2008, 05:28 PM | #2 |
On Permanant Vacation
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
|
Re: Crab run - to North East, MD
Hasn't been posted yet but the last two years it's been the last weekend in July.
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun.. 18 Shelby GT 350 04 Mach 1 (Sold 9/1/2018 ) 18 Ford Explorer XLT 17 Mustang GT/CS Convertible 16 Fusion SE AWD Ecoboost 10 Fusion SE V6 66 289 Mustang Hardtop Restomod |
05-14-2008, 07:20 AM | #3 |
Registered User
Join Date: Feb 2004
Location: Harleysville, PA
Posts: 2,144
|
Re: Crab run - to North East, MD
I'm waiting for the post, too. On vacation 7/26 and 8/2, though, so I may have to miss it.
__________________
2003 Torch Red 5 spd w/ IUP Built: 7/16/03 |
05-14-2008, 12:03 PM | #4 |
Registered User
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
|
Re: Crab run - to North East, MD
Yep, gotta a Date picked out..just have to confirm it with Woody's.....details to follow soon !!
|
05-14-2008, 09:23 PM | #5 |
Registered User
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
|
Re: Crab run - to North East, MD
Ok, the 5th annual Crab Run to Woody's in North East Md. will be Sat.
Aug. 23. We will be meeting @10:00 a.m. at our house ( I'll have some Dunkin D's & Coffee here) . We will then form up & head down around 11:00 for a nice LEISURELY paced cruise down Rt 1 to 272 to North East MD for c rabs at Woodys @1:00. We may be stopping at the Nottingham Inn to meet up with others. Details & directions as it gets a little closer !! Chris |
05-14-2008, 09:24 PM | #6 |
On Permanant Vacation
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
|
Re: Crab run - to North East, MD
August 23rd...Check...one Car in!!
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun.. 18 Shelby GT 350 04 Mach 1 (Sold 9/1/2018 ) 18 Ford Explorer XLT 17 Mustang GT/CS Convertible 16 Fusion SE AWD Ecoboost 10 Fusion SE V6 66 289 Mustang Hardtop Restomod |
05-27-2008, 07:45 AM | #7 | |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: Crab run - to North East, MD
Quote:
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
|
05-27-2008, 06:20 PM | #8 |
Registered User
Join Date: Oct 2004
Location: Middletown, PA
Posts: 3,991
|
Re: Crab run - to North East, MD
It's hard to believe it will be the 5th one already.
__________________
Brian 04 Azure Mach 1 Mods: Enough to not be the slowest, but nowhere near enough to be the fastest. 17 Fusion Sport Now faster than the Mach 96 Laser Red Cobra Vert For those days you just wanna cruise with the top down 89 Shelby CSX Still rocking the VNT and Fiberides. |
05-27-2008, 07:50 PM | #9 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Crab run - to North East, MD
LEISURELY?
We always proceed at a leisurely pace. We take in the sights. Enjoy the weather. And this year....get to pay like $400 for a tank of gas. But hey. Whatever. I'm in. NO race day that weekend. Just an FYI. I am due to break all the course records this year. I couldn't do it this weekend due to a screw in the tire on the 1st run on Sunday. However, my best time was only 1.5sec off the record, which was totally attainable by the weekend if that catastrophy didn't happen. No damage. No injury. Wife got me comin out of turn 4 just as I pulled the car hard left(cause it wasn't turning!!!!! screw in front right tire) and back tire goin off course. Nice big cloud of dust and car way out of shape. Cool for video. 2 tires ordered and should be in this week. Just have to find a spot to heat cycle them.....hehe. And off to Weatherly, PA to drop that record. Anyway, wife and I are in for that run.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
05-29-2008, 12:19 AM | #10 |
Registered User
Join Date: Jan 2004
Location: Quarryville PA
Posts: 713
|
Re: Crab run - to North East, MD
Leisurely ride!!!!! who are you guy's kidding I've never driven that fast on public roads until I started crusing with you guys!!!!
PS Crabs are $140. a bushel, $50. for a dozen jumbo and $4.27 a gal. for Sunoco 93 oct. Bill Bill
__________________
2004 Comp Orange/auto/Iup born; 10/06/2003- #328 of 7182 & 1 of 1039 Comp Orange vin; 1FAFP42R14F134291 Mods; catted MRT H pipe, Magnaflow catback, C&L cai tube, PHP spacer, UPR upper/lower control arms, 35 % tint, Alum. drive shaft, AUBURN posi, Moser 31 spline axles, Richmond 410 ring & pinion, NT05R 275/40/17 drag radials, Diablo tuned, Dyno tuned by Johnny Lightning Dynoed at; 270 Hp 302 torque. 9/26/07 13.07 / 106.00 MPH BFG's 6/08 12.97et / 107mph 5/12/2010 13.00 et |
05-29-2008, 08:43 PM | #11 | |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Crab run - to North East, MD
Quote:
Those costs are a small price to pay for the good time you'll have. Besides, I'm lookin forward to seein Bill's car again. Bill.....you ARE going, are you not? Then again, with that car, you probably watch the gas gauge drop, no?
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
|
05-29-2008, 09:13 PM | #12 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Crab run - to North East, MD
Quote:
Here locally there has been a car show every weekend all weekend . Went to OC and took 1st place in two categories . Skipped this past weekend for work , family and chores . Really like to make Carlisle , if i do it will be Fri and Sat only . As far as gas goes , my street tune is 93 and race is C-16 . I was running 93at the beach all weeekend . Gas is always cheaper then parts . I only used gas . lol Plenty of other Machs at the beach . We all had a blast . PS Your really going to love the sound now . The Cog is awesome .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
05-29-2008, 09:17 PM | #13 |
Registered User
Join Date: Jan 2004
Location: Quarryville PA
Posts: 713
|
Re: Crab run - to North East, MD
I never said I wasn't going, I could care less what things cost, I just threw that in for something to say.
PS my son in-law's sister (Linda) works at Woody's. Bill
__________________
2004 Comp Orange/auto/Iup born; 10/06/2003- #328 of 7182 & 1 of 1039 Comp Orange vin; 1FAFP42R14F134291 Mods; catted MRT H pipe, Magnaflow catback, C&L cai tube, PHP spacer, UPR upper/lower control arms, 35 % tint, Alum. drive shaft, AUBURN posi, Moser 31 spline axles, Richmond 410 ring & pinion, NT05R 275/40/17 drag radials, Diablo tuned, Dyno tuned by Johnny Lightning Dynoed at; 270 Hp 302 torque. 9/26/07 13.07 / 106.00 MPH BFG's 6/08 12.97et / 107mph 5/12/2010 13.00 et |
05-30-2008, 07:15 AM | #14 | |
On Permanant Vacation
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
|
Re: Crab run - to North East, MD
Quote:
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun.. 18 Shelby GT 350 04 Mach 1 (Sold 9/1/2018 ) 18 Ford Explorer XLT 17 Mustang GT/CS Convertible 16 Fusion SE AWD Ecoboost 10 Fusion SE V6 66 289 Mustang Hardtop Restomod |
|
05-30-2008, 04:58 PM | #15 |
IRS Conversion
Join Date: Jun 2006
Location: Union Beach, NJ
Posts: 1,058
|
Re: Crab run - to North East, MD
Edit; Just checked with my social coordinator and she has said that day should be open. Barring any major events or car issues count me in.
Steve... are ya gonna mention in every post about your record goals haha jk.
__________________
Sold, but not forgotten... PHA #281 Mods: Anything ESP legal from Maximum Motorsports Hill Climb Videos Become a Hillclimber! MM&FF Feature Top of the Rock! Last edited by NJ 03Mach1; 05-30-2008 at 05:17 PM. |
06-05-2008, 09:16 AM | #16 |
Registered User
Join Date: Oct 2003
Location: Small house, Pa.
Posts: 199
|
Re: Crab run - to North East, MD
|
06-05-2008, 09:52 AM | #17 |
Shitin 'n Gitin
Join Date: Mar 2007
Location: Pasadena, MD
Posts: 1,416
|
Re: Crab run - to North East, MD
count me in, any guesses as to what gas prices will be by then? im going with about 550/gallon
__________________
2003 AB Mach -- 442/435 @ the rear ALL MOTOR -Race Gas FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's. |
06-25-2008, 11:16 AM | #18 |
IRS Conversion
Join Date: Jun 2006
Location: Union Beach, NJ
Posts: 1,058
|
Re: Crab run - to North East, MD
Dates/Times on this confirmed? been quiet in this thread.. its getting closer! lol
__________________
Sold, but not forgotten... PHA #281 Mods: Anything ESP legal from Maximum Motorsports Hill Climb Videos Become a Hillclimber! MM&FF Feature Top of the Rock! |
06-25-2008, 02:35 PM | #19 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Crab run - to North East, MD
Of course it's quiet. It's still 2 months away.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
06-28-2008, 07:02 PM | #20 |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: Crab run - to North East, MD
bump
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
06-29-2008, 02:02 PM | #21 |
"281 SUPERCHARGED"
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
|
Re: Crab run - to North East, MD
I have tried every year to make this and something always comes up . I will once again put the date on my calender and hope nothing get's in the way. Is this really the 5th annual ??? Dam how time flyies!
__________________
'03 Azure Mach1 #719 Built 12/5/02, In Garage 12/13/02 The Ride is Over It was a BLAST ! The Memories will Last Forever ! Thank You M1R !!! |
06-29-2008, 02:16 PM | #22 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Crab run - to North East, MD
Yep, the 5th. Do you even HAVE a Mach anymore????? Good grief! Etch that damned calendar and BE THERE!
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
06-29-2008, 06:15 PM | #23 | |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: Crab run - to North East, MD
Quote:
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
|
06-29-2008, 09:41 PM | #24 |
"281 SUPERCHARGED"
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
|
Re: Crab run - to North East, MD
Ok, it's etched!
__________________
'03 Azure Mach1 #719 Built 12/5/02, In Garage 12/13/02 The Ride is Over It was a BLAST ! The Memories will Last Forever ! Thank You M1R !!! |
06-30-2008, 07:55 AM | #25 |
Shitin 'n Gitin
Join Date: Mar 2007
Location: Pasadena, MD
Posts: 1,416
|
Re: Crab run - to North East, MD
anybody else getting excited?.... i know its still 2 months away
__________________
2003 AB Mach -- 442/435 @ the rear ALL MOTOR -Race Gas FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|