2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 01-06-2008, 07:22 PM   #126
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by blown03Mach1 View Post
LOL Well my name was changed to this one as I use this name on nearly every other board I frequent. I requested the name change since I have become s/c after joining in here.

Now as far as the sale..... I have still been looking at it, but I cannot pull the trigger on putting it up for sale. I either sell it, or sink some $$$$ into it as I have a leaking valve guide. I would like to just forge the motor at the same time as having the heads redone, but as you are well aware, this stuff is not cheap!

BTW, the hottie has since posed in Playboys "Fresh faces"...:ORANGE:
Well let me know when you post that pic in hottie of the day .


Nothing is cheap . Does not look like it will get any better either . Our state tax just went to 6% and corp. tax went to 8.25% . We also have a 6% piggy back tax at end of year . Md. is now the worst taxed state in the country .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 01-07-2008, 01:00 PM   #127
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

What MAFia works..the one with 12" wire or 36"
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 01-07-2008, 01:03 PM   #128
cmylxgo
Blower Guru
 
cmylxgo's Avatar
 
Join Date: Dec 2002
Location: Motor City
Posts: 2,224
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
What MAFia works..the one with 12" wire or 36"
Both work...but the 36" gives you alot more room to work with.

-Corey
__________________
YouTube Videos: http://www.youtube.com/slugbitchracing

2003 Mustang Mach 1 AutoMatic (Torch Red)
Born On Date: 2.28.03
Vin: 396895

Adoption Date: 9.07.09


Best ET: 9.54
Best MPH: 149.99
Best 60FT: 1.32

All done on 17" Radials
cmylxgo is offline   Reply With Quote
Old 01-07-2008, 01:04 PM   #129
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
What MAFia works..the one with 12" wire or 36"

I believe either, but I am running the 12".
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 01-15-2008, 01:25 PM   #130
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

Now that I have ordered everything I am looking for someone to install it. I have went to some people that were referred to me. What am I looking at for price to install the sc, pump, inj and tune? Also, people are telling my dad (he is running around asking people since im in iraq) that I need new spark plugs, and I will be running a lot hotter so I should replace my radiator. What are your thoughts?
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides
Funhog is offline   Reply With Quote
Old 01-15-2008, 04:54 PM   #131
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
Now that I have ordered everything I am looking for someone to install it. I have went to some people that were referred to me. What am I looking at for price to install the sc, pump, inj and tune? Also, people are telling my dad (he is running around asking people since im in iraq) that I need new spark plugs, and I will be running a lot hotter so I should replace my radiator. What are your thoughts?
Your stock radiator will be fine. Run the NGK TR6 plugs, part number 4177. Gap should be set at 28-32. Ball park figure for the labor would be $1,200.
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 01-15-2008, 05:45 PM   #132
Mach 1
DSG guarded by a GSD
 
Mach 1's Avatar
 
Join Date: Apr 2006
Location: No. Easton, MA
Posts: 2,332
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Scott McClure View Post
Your stock radiator will be fine. Run the NGK TR6 plugs, part number 4177. Gap should be set at 28-32. Ball park figure for the labor would be $1,200.
Couldn't have said it better myself.
__________________
Procharged P-1SC Intercooled, 9 psi, 42 lb injectors, 80 mm Lightning MAF w/MAF.ia, 255 lph GT pump, NGK TR-6 plugs, Water/Methanol injection, SCT X cal 2 tuned by DEZ Racing, 10.5" AFS Rear wheels w/Nitto DR's, AutoMeter fuel/boost guages, MGW orange handle shifter, Sequential taillights, Raptor shift light, Visus louvers, Magnaflow catted x-pipe w/Magnapacks, 4" rolled tips. Canton tank and a little bit of chrome and powder coating. 429 rwhp, 365 rwtq Dyno pic Engine bay pic
Mach 1 is offline   Reply With Quote
Old 01-23-2008, 08:40 PM   #133
ScreaminMachOne
Missing Third!
 
ScreaminMachOne's Avatar
 
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
Re: Official Procharger HP/TQ/mods thread:

A 4.15 pulley with a D1 is more than a 4.00 pulley right? Or do I have them mixed up. On boost I mean
__________________
2004 Mach1-Sold
Forged-D1
10.89@128mph
ScreaminMachOne is offline   Reply With Quote
Old 01-23-2008, 09:56 PM   #134
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by ScreaminMachOne View Post
A 4.15 pulley with a D1 is more than a 4.00 pulley right? Or do I have them mixed up. On boost I mean

4.15 will slow the compressor down vs the 4.0 thus less boost with the 4.15.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 01-23-2008, 11:00 PM   #135
ScreaminMachOne
Missing Third!
 
ScreaminMachOne's Avatar
 
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
Re: Official Procharger HP/TQ/mods thread:

I think I need to switch than, Im running a 4.00 pulley which I was told was 10-11psi, so switching to 4.15 would put me around 9-10psi, but this is through manifolds and o/r x, I dont know the boost level on the 4.00 pulley til Feb 9 when it goes dyno n tuned..
__________________
2004 Mach1-Sold
Forged-D1
10.89@128mph
ScreaminMachOne is offline   Reply With Quote
Old 01-24-2008, 05:05 AM   #136
blown03Mach1
8LB YNER
 
blown03Mach1's Avatar
 
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by ScreaminMachOne View Post
I think I need to switch than, Im running a 4.00 pulley which I was told was 10-11psi, so switching to 4.15 would put me around 9-10psi, but this is through manifolds and o/r x, I dont know the boost level on the 4.00 pulley til Feb 9 when it goes dyno n tuned..
PM 03TRMach. Mike is friend of mine that just put a D1 on his Mach and I believe he has the 4.15 pulley as well.
__________________
Just because you're winnin'
Don't mean you're the lucky ones


TR 2003 (Jezebel) sold Mar 12...
blown03Mach1 is offline   Reply With Quote
Old 01-27-2008, 10:48 PM   #137
ScreaminMachOne
Missing Third!
 
ScreaminMachOne's Avatar
 
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
Re: Official Procharger HP/TQ/mods thread:

I quess I may switch to a 4.15 pulley with my D1 on stock bottom end to last a while.
__________________
2004 Mach1-Sold
Forged-D1
10.89@128mph
ScreaminMachOne is offline   Reply With Quote
Old 02-02-2008, 11:24 AM   #138
Funhog
Mach and Harley owner
 
Funhog's Avatar
 
Join Date: Nov 2005
Location: Fort Riley, KS
Posts: 227
Re: Official Procharger HP/TQ/mods thread:

I know I already asked but I just want to make sure Im not blind and cant read. Cobra tanks, needed or not needed to run a P1SC? So far, I have had two businesses tell me I need a cobra tank. Are they just trying to get more money from me? Thanks
__________________
92 5.0LX - CAI, TB, Shorties, O/R H, Flows, 3.55, A/C and Smog Delete, U/D Pullies, Auto w/ Shift Kit - SOLD
03 Mach 1 - P1SC with 3.60", bored .020 over, forged bottom end, FRPP shorties, Magnaflow catted X, Magnapacks, Tokico blues, H&R SS, MM C/C plates, Spec 2+, Steeda FWA, MM clutch quadrant, MGW Orange, FR500 17x9/17x10.5
My Rides

Last edited by Funhog; 02-02-2008 at 12:03 PM.
Funhog is offline   Reply With Quote
Old 02-02-2008, 12:28 PM   #139
CMEmach1
"281 SUPERCHARGED"
 
CMEmach1's Avatar
 
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
Re: Official Procharger HP/TQ/mods thread:

No matter what anyone says...you don't need the cobra tank or pumps for that matter. I used my stock tank with an Aviator pump and after 43,000 mi., 18-20 trips down the 1/4 mi., five 20 min.high rpm sessions on the Barber Motorsports Road Course Track and countless local street encounters I have never had a problem with fuel delivery.
__________________
'03 Azure Mach1 #719
Built 12/5/02, In Garage 12/13/02

The Ride is Over
It was a BLAST !
The Memories will Last Forever !
Thank You M1R !!!
CMEmach1 is offline   Reply With Quote
Old 02-02-2008, 05:05 PM   #140
Evn62719
MarinesMach1
 
Evn62719's Avatar
 
Join Date: Dec 2006
Location: Denham Springs,LA
Posts: 467
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by Funhog View Post
I know I already asked but I just want to make sure Im not blind and cant read. Cobra tanks, needed or not needed to run a P1SC? So far, I have had two businesses tell me I need a cobra tank. Are they just trying to get more money from me? Thanks

Your stock fuel tank with an aviator or SVT Focus pump will be fine until you start reaching the high 400 hp range. Then you can switch to dual pumps.
__________________
P1SC/3.4 pulley,60# injectors, Comp stage 2 blower cams,Cp pistons, Probe rods Beehive valve springs,AFM power pipe,SLP line lock,Cobra tank and pumps,BBK long tubes, o/r x,Magnapacks,T56-26 spline input shaft, MGW shifter,Centerforce DFX, Steeda springs,Steeda H/D UCA's,Metco LCA's,Eaton posi,3.73's,Moser 31 splines, Black 18" FR500's 295/35 BFG drag radials.
Evn62719 is offline   Reply With Quote
Old 02-02-2008, 07:17 PM   #141
OKMach1
Registered User
 
OKMach1's Avatar
 
Join Date: Jan 2004
Location: Cushing, OK
Posts: 565
Re: Official Procharger HP/TQ/mods thread:

The advantage to the Cobra tanks is they're sumped. You can get by with your regular tank, just don't let the fuel level get too low.
__________________
OKMach1
OKMach1 is offline   Reply With Quote
Old 02-02-2008, 08:32 PM   #142
CMEmach1
"281 SUPERCHARGED"
 
CMEmach1's Avatar
 
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
Re: Official Procharger HP/TQ/mods thread:

Like I said in my previous post.....No matter what others say you don't need the cobra tank or pumps. I have run mine with the low fuel light on without any problems.
__________________
'03 Azure Mach1 #719
Built 12/5/02, In Garage 12/13/02

The Ride is Over
It was a BLAST !
The Memories will Last Forever !
Thank You M1R !!!
CMEmach1 is offline   Reply With Quote
Old 02-09-2008, 03:48 PM   #143
ScreaminMachOne
Missing Third!
 
ScreaminMachOne's Avatar
 
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
Re: Official Procharger HP/TQ/mods thread:

Stock bottom end-Yes

Head unit-D1sc

Pulley size-4.00 with 10 pounds of boost@6300rpm

Fuel system-60lb injectors,Focus fuel pump with BAP

Tuner-Xcal 2 by Jon Lund

Mods-Bassani Cat-back w/ O/R x-pipe,Php intake spacer

Made 468hp & 440tq on Mustang Dyno
__________________
2004 Mach1-Sold
Forged-D1
10.89@128mph
ScreaminMachOne is offline   Reply With Quote
Old 02-09-2008, 06:05 PM   #144
CMEmach1
"281 SUPERCHARGED"
 
CMEmach1's Avatar
 
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
Re: Official Procharger HP/TQ/mods thread:

Nice #'s! Jon Lund knows what he's doing. He tuned my car a little over a year ago. I want to go to a D1 but I'm gona forge it first. Good luck with it!
__________________
'03 Azure Mach1 #719
Built 12/5/02, In Garage 12/13/02

The Ride is Over
It was a BLAST !
The Memories will Last Forever !
Thank You M1R !!!
CMEmach1 is offline   Reply With Quote
Old 02-21-2008, 02:18 AM   #145
VoodooMACH
sittin in a parking lot..
 
Join Date: Jan 2005
Location: Katy/Austin, TX
Posts: 1,418
Re: Official Procharger HP/TQ/mods thread:

Quote:
Originally Posted by ScreaminMachOne View Post
Stock bottom end-Yes

Head unit-D1sc

Pulley size-4.00 with 10 pounds of boost@6300rpm

Fuel system-60lb injectors,Focus fuel pump with BAP

Tuner-Xcal 2 by Jon Lund

Mods-Bassani Cat-back w/ O/R x-pipe,Php intake spacer

Made 468hp & 440tq on Mustang Dyno
What's the duty cycle on those injectors at that power level? Also do you have the stock maf or what?
__________________
03 Oxford white Mach... SOLD
VoodooMACH is offline   Reply With Quote
Old 02-25-2008, 03:43 PM   #146
RunninRed
I'm Your Huckleberry
 
RunninRed's Avatar
 
Join Date: Apr 2004
Location: Dothan, AL.
Posts: 422
Re: Official Procharger HP/TQ/mods thread:

Just got a retune done this weekend.....I'm happy.

Head unit - P1sc

Stock Bottom End - Yes, bone stock longblock

Pulley size - 4.00 Seeing 10 lbs of boost @ 6500rpm

Fuel system - 42 lb injectors, SVT Focus pump with Kenne Bell BAP

Tuner - SCT tune by Tim Barth @ Modular Powerhouse

Mods - BBK longtubes, off rd. x-pipe, Magnaflow magnapacks, Anderson Powerpipe, Php intake spacer, ported lower intake.

Made 481 rwhp & 440 rwtq on a Dynojet
__________________
03 DSG, 5-speed, IUP. Procharger. 10's on stock longblock. MPH Tuned.
90 Lx Notch. R Block, 363 cubes, Vortech. MPH Tuned.
05 F-250,True Blue, 34 lbs of boost
RunninRed is offline   Reply With Quote
Old 02-26-2008, 08:46 PM   #147
ScreaminMachOne
Missing Third!
 
ScreaminMachOne's Avatar
 
Join Date: Aug 2006
Location: Sterling,Va
Posts: 919
Re: Official Procharger HP/TQ/mods thread:

Yeah running a stock maf with mafia
__________________
2004 Mach1-Sold
Forged-D1
10.89@128mph
ScreaminMachOne is offline   Reply With Quote
Old 02-27-2008, 09:59 PM   #148
BlueDevil04
Are all Machs this Fast??
 
BlueDevil04's Avatar
 
Join Date: May 2004
Location: Concord, N.C.
Posts: 617
Re: Official Procharger HP/TQ/mods thread:

Got my belt slipped fixed and decided to have it retuned.

Head unit - D1sc

Stock Bottom End - No, forged rods and pistons 8.5 CR

Pulley size - 3.5 Seeing 17-18 lbs of boost @ 6500rpm

Fuel system - tiwn GT pumps with 60 lb injectors

Tuner - Pro-Dyno

Mods - Full exhaust and countless other things.

Made 660 rwhp & 565 rwtq on a Dynojet


We could not take it to redline because without a modified FPDM and without upgraded lines the car is running out of fuel pressure past 6200 rpms. My tuner says that when these two things are fixed the final numbers should be around 700 rwhp!!!!! Videos and stuff are coming soon.
__________________
Mods:
blown motor mod!!!
660 rwhp and 565 rwhp with 17lbs of boost. (sold)
BlueDevil04 is offline   Reply With Quote
Old 03-02-2008, 07:39 PM   #149
stangman_2
Registered User
 
Join Date: Mar 2008
Location: Salisbury, Maryland
Posts: 1
Re: Official Procharger HP/TQ/mods thread:

I'm really enjoying reading all the these threads on Mach 1 power! I'm done quite a bit of work on my 2003 Zinc Yellow Mach - for the record:

Head unit - P1SC

Stock Engine (except for injectors and tune)

Pulley size - 3.7" (11 lbs of boost @ 6500rpm)

Fuel system - Cobra Twin Pumps with 42 lb injectors

Tuner - Dyno Tuned Performance- VA Beach, VA

Mods - SCT Tune via Pro Racer III, Diablo Sport MAFia (set to 4) with stock MAF in blow-thru configuration after intercooler, Bassani Ceramic Coated Headers with CATS/X-Pipe and Mufflers, Centerforce Clutch & Aluminum Flywheel, FRPP Aluminum driveshaft, cold air intake with fenderwell mods w/K&N air filter mounted on opposite side away from engine

489 rwhp @ 6100 rpm & 466 rwtq @ 5000 rpm on a Dynojet

I am considering going to Kenne Bell BAP as even the Cobra pumps were maxed out at 100% @ 6100 rpm, although AFR was still good at 11.8:1 at 6500 rpm. I've only got 275's on my rear and they break loose way too easily, so looking at going to 17 x 10.5's and 315's.

Does anyone have a good solution to the oil that is drawn back into the head unit and intake system from PCV system? I've got JLT PCV Pre-Filters in both valve covers and I still get some oil in my inake system. What a pain!
stangman_2 is offline   Reply With Quote
Old 03-08-2008, 11:36 PM   #150
FastBlueMach1
Crewchief
 
FastBlueMach1's Avatar
 
Join Date: May 2007
Location: Ft. Lewis, Wa
Posts: 546
Re: Official Procharger HP/TQ/mods thread:

i have been reading for dys about power adders and the stock bottom end and im curious about how much forged rods and pistons would cost parts+labor, and since the block is already apart, should the crank be upgraded too?
__________________
I'm the guy who does his job. You must be the other guy...
15T Blackhawk Mechanic Extraordinaire



BBK 65mm TB
SCT x3
Kooks LT, o/r X Mac Catback
PSR K w/ D Spec coilovers
2000 Cobra R brakes
275/40/17 F1GSD3
315/35/17 F1GSD3
FR500 wheels 17x9, 17x10.5
Amsoil engine and tranny
4.10 gears
ACT 14.3 lb flywheel
SPEC clutch
FRPP driveshaft
C&L full intake w/85mm maf
MGW shifter
NGK TR55ix
319HP 333TQ at the wheels
H&K USP compact .40S&W
FastBlueMach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:49 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<