2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > Regional Area Forums > US-MidWest Region

US-MidWest Region WI, IL, IN, MI, OH, KY, MN, IA, MO

Reply
 
Thread Tools Display Modes
Old 03-04-2006, 06:35 PM   #1
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
MACH 1's in Michigan?

Allright, I see them everywhere in the summer on cruise nights, How many owners are on here? Im from the Metro Detroit area. Come on where ya hidin
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-04-2006, 07:09 PM   #2
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: MACH 1's in Michigan?

Hiddin in Virginia. Born and raised in Saginaw.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-04-2006, 10:01 PM   #3
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

Guess Ya Gotta Follow The Money, Oh Well, I Have None So Im Not Leaving
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-05-2006, 12:34 AM   #4
demonspeed98
Expert Powder Coater
 
demonspeed98's Avatar
 
Join Date: Oct 2005
Location: Ann Arbor, mi
Posts: 313
Re: MACH 1's in Michigan?

I just got my Mach last October, looking forward to cruising this summer. It would be nice to get a bunch of Michigan Mach's together sometime.
demonspeed98 is offline   Reply With Quote
Old 03-05-2006, 01:36 AM   #5
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Smile Re: MACH 1's in Michigan?

Yeah Im Down For The Weekend Cruise/drag Strip Tour, Just Waitin For The Road Salt Too Wash Away So I Can Put The Rear End In And Have Her Tuned Again.
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-05-2006, 07:34 AM   #6
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: MACH 1's in Michigan?

Get together frist week of July when I come home on Vacation so I can join you.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-05-2006, 10:15 PM   #7
underdog1973
Registered User
 
underdog1973's Avatar
 
Join Date: Jul 2005
Location: Davison, Michigan
Posts: 63
Re: MACH 1's in Michigan?

sounds like a great idea count me in
underdog1973 is offline   Reply With Quote
Old 03-06-2006, 09:25 PM   #8
98StangRidah
Where'd my zafu go?
 
98StangRidah's Avatar
 
Join Date: Mar 2005
Location: Grand Rapids, MI
Posts: 2,707
Re: MACH 1's in Michigan?

Where?


Oh and Hi!
__________________
For Sale:
2004 Comp. Orange Mach1 - purchased 3/26/2005

Exhaust
MRT H-Pipe with cats
Magnaflow catback

Suspension
Bilstein struts & shocks
Steeda sport springs
MM - caster/camber plates, steering rack bushings, swaybar bushings and endlinks
18x9 Bullits with Michlein PS2s in 255/40

Other stuff - MGW shifter, MRT hood struts and black exhaust tips, SCT tune, PHP spacer

98StangRidah is offline   Reply With Quote
Old 03-07-2006, 03:42 PM   #9
joey c
Registered User
 
joey c's Avatar
 
Join Date: Nov 2004
Location: Kimball, MI
Posts: 18
Re: MACH 1's in Michigan?

I'm about 30 minutes from warren. I go down to wild woodys on sunday's. Gonna try and go to milan this year. Maybe hang out some time
joey c is offline   Reply With Quote
Old 03-07-2006, 06:23 PM   #10
3150Mach1
Love my Mach
 
3150Mach1's Avatar
 
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
Re: MACH 1's in Michigan?

You Michigan guys better get with it and get something together. Don't let us VA guys show you up. Got over 40 signed up here in VA for a cruise in May.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date
Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt
3150Mach1 is offline   Reply With Quote
Old 03-08-2006, 10:51 PM   #11
speeddemon
Can you hear me now?
 
speeddemon's Avatar
 
Join Date: Mar 2005
Location: Michigan
Posts: 659
Re: MACH 1's in Michigan?

I too went to wild woodys several times last summer. i too am plannin on going to milan drag way cuz the one out here sucks real bad. Oh yeah, I'm in Almont, about 6 miles north of Romeo, they guy from davison will probably know where. But, when im not workin nights on the weekends, I usually cruise Gratiot or Woodward. Let me know if, when, where you all wanna meet up at. Preferably on a weekend afternoon or night would probably be the best time for most of us.
__________________
EXPECT THE UNEXPECTED

2003 Red Mach
6 Speed w/ IUP

  • K&N Air Filter
  • SLP LoudMouth2 Cat-Back
  • Bassani Off Road X Pipe
  • MGW Orange shifter
  • Moroso Line Lock
  • SPEC Stage 2 w/ steel flywheel
  • Bassani Mid-Length Headers
  • FRPP 4.10
  • HPM MegaBite LCA
  • T-56 Trans
speeddemon is offline   Reply With Quote
Old 03-09-2006, 12:29 AM   #12
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

You know I'll feel bad if I commit to a cruise night with ya'll, but the car is under the knife right now and so will be my knee in 2 wks, and its my left and that's the clutch pedal. Don't know exactly how long the down time will be, for both for that matter. But I'll keep watching and play it by ear, and oh yeah, I go to Woodys every sunday also, but never saw your Mach their, and let ya know Detroit Speed Works A.K.A Livernois Performance (Formerly Ramchargers) is now open in the Roseville store. (Rumor has it the mobile dyno will be available for dyno pulls on Sunday night cruises at Woody's) Hope to see sll you there!!!!!!!!!!!!!!Lets get our **** in gear and put down some big numbers!!!!!!!!
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-09-2006, 06:48 PM   #13
speeddemon
Can you hear me now?
 
speeddemon's Avatar
 
Join Date: Mar 2005
Location: Michigan
Posts: 659
Re: MACH 1's in Michigan?

I wasnt at woodys every sunday nor the whole day. I would just park and take a look around then drive up and down that area looking for races. I really cant park it and show it off because under the hood is really dirty(daily driver and once in a while during the winter) I hope to see you and your car back in action soon. My car too is under repairs for the clutch again. You gotta let me know how the service was at Alternative too. I called up there once to see how much a Vortec would be plus installation and tune and he told me 7500, I just about **** my pants. Maybe even let me take your Vortec'd Mach for a spin? HaHa, yeah right (hey, it was worth the try) Do you know if the new Livernois will be just a store or will it be a shop as well? Because the one in Dearborn is like a 1 hour and 15 minute drive for me just to go and buy parts, and get a tune soon too.
__________________
EXPECT THE UNEXPECTED

2003 Red Mach
6 Speed w/ IUP

  • K&N Air Filter
  • SLP LoudMouth2 Cat-Back
  • Bassani Off Road X Pipe
  • MGW Orange shifter
  • Moroso Line Lock
  • SPEC Stage 2 w/ steel flywheel
  • Bassani Mid-Length Headers
  • FRPP 4.10
  • HPM MegaBite LCA
  • T-56 Trans
speeddemon is offline   Reply With Quote
Old 03-09-2006, 07:34 PM   #14
tonysmach
Registered User
 
tonysmach's Avatar
 
Join Date: Apr 2004
Location: Romeo, MI
Posts: 191
Re: MACH 1's in Michigan?

I am from Romeo area. I have been to Woody's a few times last summer. A get together in the spring or summer at the track or car show would be great. Let me know.
__________________
Tonysmach
tonysmach is offline   Reply With Quote
Old 03-09-2006, 09:33 PM   #15
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

[Do you know if the new Livernois will be just a store or will it be a shop as well? Because the one in Dearborn is like a 1 hour and 15 minute drive for me just to go and buy parts, and get a tune soon too.[/QUOTE]

Detroit Speed Shops (Livernois), located on Gratiot between Masonic and 14 mile will carry pretty much the same inventory as Ramchargers, there will be no shop!!!, this is only a high performance parts depot w/links to Livernois for the custom install stuff, like custom tunes, blowers/turbos, heads, cams, yadadada. They are currently open, so if your in the area, stop on in and check it out. They can help you out w/blower setups too, guy down at the Livernois main shop has an 04 Mach w/blower and livernois heads on it. Very Mean Mach, One the MMFF shoot out Machs Vs. Bullitts. Talk at ya later
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-10-2006, 07:17 AM   #16
tonysmach
Registered User
 
tonysmach's Avatar
 
Join Date: Apr 2004
Location: Romeo, MI
Posts: 191
Re: MACH 1's in Michigan?

Has any of you guys heard of Nelson's performance shop in Waterford, MI. Their website states that they use diablo software to tune. I have a preditor and would like to get a custom tune but I have not heard anything about this shop.
__________________
Tonysmach
tonysmach is offline   Reply With Quote
Old 03-10-2006, 08:02 PM   #17
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

I've heard of them, but never came across anyone who has had work done by them, so no yea or nea's about Nelsons. I do however know that Lidio at Alternative does do good quality work, and is very easy to talk to. He however is a SCT distributer, however he won't beat around the bush, example: this is what it takes to do this and this is the price, no exceptions. He also only uses parts on cars that he has personally done R&D on, thus creating a powerful combo. However he will tune just about any mustang combo. Cost is high though, he charged me 500 for a dyno tune and 3 pulls on the dynojet, but he is very smart and knows how to make modular run strong and last. Just my opinion though.
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-10-2006, 08:22 PM   #18
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

So it's friday night March 10, the temp is 48 degrees, air is clear, roads are salt free, and the car is out of storage. Im going out cruising tonight because I wont be able to drive in two weeks, surgery on clutch leg. So im eatin up this spring like weather, hope to see ya out there.


Ok update: night's outcome 4/4 (First Night out with new 17x( Mach1 wheels w/ M/T ET street radials

Kills:
SRT-4 neon, stage 2,this guy was pretty cool, his buddy riding shotgun was cocky though, I rolled up next to him and he was flippin his zippo like the neon was gonna "burn me". So i told him, im not gonna lie to you, I have an unfair advantage, ET's out back, well run first time starting at 45mph ill let you go into 2nd, and ill start in 3rd. Outcome: me ahead buy a fender. Second run, I say dead dig, and a cop pulls by so we can't run. He wouldn't race again afetr that.

03 Stang 2V 5spd, full length headers/Offroad X/catback/CAI/Throttle body/intake spacer/and he said he had a 4.10, Dead dig run, Pulled a solid 2.5 cars to 80mph and let off. He loved the Mach, although first he said he would smoke me, hahaha!!!!!!

95 GT 5 spd, 3.73's/E cam/Headers/Exhaust/cobra intake/yadada/, Dead dig run, no question, I got him sleeping at the light, and looked back and i thought he stopped running me. He finally caught up and asked what year, what's done, and that I had just wiped the deck with his ***, he was pretty cool. He probably would take him if he had a Slick, and some better heads than the ET7E's. All in all good race.

03 Cobra, Stone Stock except for cat back/ and had BFG Drags on the IRS!!!!, This was almost a stale mate, I left at only 1500 very lightly, he came out like a bat out of hell!!!!!, I ran through 1-2-3-4 and got him by a fender, but he said he grinded 3rd and had to lift, if he did, so what ill take the win. Cause you know he would have it the shoe was on the other foot.


All in all, this season looks to be pretty good in the making. I was actually getting jealous of all the stories i was hearing about the cars being built. If any of you locals ever go down and watch the detroit street races, it should be alot of fun this summer.
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street

Last edited by BIG4CAM; 03-11-2006 at 12:54 AM.
BIG4CAM is offline   Reply With Quote
Old 03-11-2006, 10:57 AM   #19
Mr Mach 1 2004
Registered User
 
Mr Mach 1 2004's Avatar
 
Join Date: Jan 2005
Location: Romulus Michigan
Posts: 203
Re: MACH 1's in Michigan?

Romulus Mi here near Metro Air Port.
__________________










http://www.cardomain.com/my/edit_page?page_id=769793
Mr Mach 1 2004 is offline   Reply With Quote
Old 03-16-2006, 10:52 PM   #20
speeddemon
Can you hear me now?
 
speeddemon's Avatar
 
Join Date: Mar 2005
Location: Michigan
Posts: 659
Re: MACH 1's in Michigan?

Well big4cam, sounds like you had a pretty good day/night. It was killin me when the temp was 70 just a few days ago, my car is still on stands because I am trying to get the trans out. I got it kinda out but I am trying not to take off the headers, but insted, I just screwed my self. The trans on the drivers side is about 1 inch out and the passenger side is still all the way in and jammed on the header. I cannot get the trans back in right either, its jammed up pretty good. I am gonna have to wait till my father comes back from work in Tenn. to get some help. I get too fusturated and give up way too fast. I am hoping that the Mach will be back in the streets in 4 to 6 weeks. Man that is a long time now that I think about it.
__________________
EXPECT THE UNEXPECTED

2003 Red Mach
6 Speed w/ IUP

  • K&N Air Filter
  • SLP LoudMouth2 Cat-Back
  • Bassani Off Road X Pipe
  • MGW Orange shifter
  • Moroso Line Lock
  • SPEC Stage 2 w/ steel flywheel
  • Bassani Mid-Length Headers
  • FRPP 4.10
  • HPM MegaBite LCA
  • T-56 Trans
speeddemon is offline   Reply With Quote
Old 03-17-2006, 03:08 AM   #21
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

Quote:
Originally Posted by speeddemon
Well big4cam, sounds like you had a pretty good day/night. It was killin me when the temp was 70 just a few days ago, my car is still on stands because I am trying to get the trans out. I got it kinda out but I am trying not to take off the headers, but insted, I just screwed my self. The trans on the drivers side is about 1 inch out and the passenger side is still all the way in and jammed on the header. I cannot get the trans back in right either, its jammed up pretty good. I am gonna have to wait till my father comes back from work in Tenn. to get some help. I get too fusturated and give up way too fast. I am hoping that the Mach will be back in the streets in 4 to 6 weeks. Man that is a long time now that I think about it.
Well best of luck getting that car back together, and thats the reason why im glad i don't have long tubes.
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Old 03-17-2006, 12:02 PM   #22
speeddemon
Can you hear me now?
 
speeddemon's Avatar
 
Join Date: Mar 2005
Location: Michigan
Posts: 659
Re: MACH 1's in Michigan?

I was going to get long tubes too, but either way, long tubes or mid lengths like mine still have to come off. But I have heard that Hooker long tubes do not have to be removed to get the tranny out. Not sure if they have to be loosened but at least they dont have to come off. If I was to do it all over again, I would definatly go the Hooker route, only because it is not as big of a pain in the *** when you want to pull the trans.
__________________
EXPECT THE UNEXPECTED

2003 Red Mach
6 Speed w/ IUP

  • K&N Air Filter
  • SLP LoudMouth2 Cat-Back
  • Bassani Off Road X Pipe
  • MGW Orange shifter
  • Moroso Line Lock
  • SPEC Stage 2 w/ steel flywheel
  • Bassani Mid-Length Headers
  • FRPP 4.10
  • HPM MegaBite LCA
  • T-56 Trans
speeddemon is offline   Reply With Quote
Old 03-17-2006, 02:58 PM   #23
Torched 03 Mach
Registered User
 
Torched 03 Mach's Avatar
 
Join Date: Dec 2005
Location: Holly, MI
Posts: 30
Re: MACH 1's in Michigan?

Swartz Creek, MI here but work in the detroit area, check out our mustang club www.salinestangs.com tell em venom88 sent cha.
Torched 03 Mach is offline   Reply With Quote
Old 03-18-2006, 10:14 AM   #24
98StangRidah
Where'd my zafu go?
 
98StangRidah's Avatar
 
Join Date: Mar 2005
Location: Grand Rapids, MI
Posts: 2,707
Re: MACH 1's in Michigan?

Any good suspension/chasis shop out there?
__________________
For Sale:
2004 Comp. Orange Mach1 - purchased 3/26/2005

Exhaust
MRT H-Pipe with cats
Magnaflow catback

Suspension
Bilstein struts & shocks
Steeda sport springs
MM - caster/camber plates, steering rack bushings, swaybar bushings and endlinks
18x9 Bullits with Michlein PS2s in 255/40

Other stuff - MGW shifter, MRT hood struts and black exhaust tips, SCT tune, PHP spacer

98StangRidah is offline   Reply With Quote
Old 03-20-2006, 12:57 AM   #25
BIG4CAM
Finally Bought One
 
BIG4CAM's Avatar
 
Join Date: Mar 2006
Location: Returning Pop Bottles
Posts: 476
Re: MACH 1's in Michigan?

Quote:
Originally Posted by 98StangRidah
Any good suspension/chasis shop out there?

What cha looking for? and what area you from, maybe I can point ya in the right direction.
__________________
2003 Mach 1 32v DOHC
Tremec TKO 600
Mods:
Roy's Intake, 98 cams, LT's with 3 inch x pipe and spintechs, 4.56 gears

Best ET: 12.157@112.8 1.627 60ft
Best ET street tire: 12.89@110
1997 Mustang GT
4r70w
232rwhp/287tq
2001 P.I. motor swap
The slug Cruiser's best ET 13.89@98.7
1994 Lightning w276k miles
89gt camshaft w/hughes 2400k convertor
14.58@ 91mph 2.0560ft
Rusty but Trusty, still getting down and dirty on the street
BIG4CAM is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<