wtb: single bolt timing cover - 2003-04 Mach 1 Registry Owners Club

DSG2003Mach1 · 08-23-2015, 04:16 PM

must be in good condition, no stripped bolt holes or gauged mating/sealing surfaces. Let me know what ya got

jv7 · 08-23-2015, 10:39 PM

Good luck!

Vndcatr · 08-25-2015, 08:00 PM

Still looking for one? i think i have one from my mach motor before i went to 3 bolt.. Let me take a look

DSG2003Mach1 · 08-25-2015, 08:32 PM

ya lemme know if you have it. Im gonna see if I can salvage mine tomorrow but would nice to have a backup lined up.

Vndcatr · 08-25-2015, 09:24 PM

Quote:

Originally Posted by DSG2003Mach1

ya lemme know if you have it. Im gonna see if I can salvage mine tomorrow but would nice to have a backup lined up.

Im almost sure i have it.. ill pm you tonight or tomorrow morning since i work nights..

dino · 08-25-2015, 10:05 PM

I have an sn95 cobra unit. Dirty but good. What's it worth?

DSG2003Mach1 · 08-25-2015, 10:25 PM

Are the 95s the right style? Thought all that was 3 bolt?

Vndcatr · 08-26-2015, 03:33 PM

well one of the ones i had and thought was my stocker is a 03/04 cobra TC.. so ill have to get over to my storage to confirm. If you still need one i can check it out this weekend

DSG2003Mach1 · 08-26-2015, 04:59 PM

no worries, I found a machine shop near work that can supposedly get out a broken easy out so Ill know tomorrow if I need another cover or not

DSG2003Mach1 · 08-28-2015, 09:01 PM

no longer looking, got this one fixed and helicoiled for $40

08-23-2015, 04:16 PM	#1
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	wtb: single bolt timing cover must be in good condition, no stripped bolt holes or gauged mating/sealing surfaces. Let me know what ya got __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

08-23-2015, 10:39 PM	#2
jv7 Registered User Join Date: Jan 2004 Location: Round Rock, TX Posts: 950	Re: wtb: single bolt timing cover Good luck!

08-25-2015, 08:00 PM	#3
Vndcatr SVT Join Date: Jun 2010 Location: Northern California Posts: 812	Re: wtb: single bolt timing cover Still looking for one? i think i have one from my mach motor before i went to 3 bolt.. Let me take a look __________________ 2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning..

08-25-2015, 08:32 PM	#4
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: wtb: single bolt timing cover ya lemme know if you have it. Im gonna see if I can salvage mine tomorrow but would nice to have a backup lined up. __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

08-25-2015, 10:05 PM	#6
dino Registered User Join Date: Jun 2006 Location: waller, tx Posts: 1,225	I have an sn95 cobra unit. Dirty but good. What's it worth? __________________ '07.5 Duramax. '12 Cruze. '03 Mach. 2x GT. John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree.

08-25-2015, 10:25 PM	#7
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: wtb: single bolt timing cover Are the 95s the right style? Thought all that was 3 bolt? __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

08-26-2015, 03:33 PM	#8
Vndcatr SVT Join Date: Jun 2010 Location: Northern California Posts: 812	Re: wtb: single bolt timing cover well one of the ones i had and thought was my stocker is a 03/04 cobra TC.. so ill have to get over to my storage to confirm. If you still need one i can check it out this weekend __________________ 2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning..

08-26-2015, 04:59 PM	#9
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: wtb: single bolt timing cover no worries, I found a machine shop near work that can supposedly get out a broken easy out so Ill know tomorrow if I need another cover or not __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

08-28-2015, 09:01 PM	#10
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: wtb: single bolt timing cover no longer looking, got this one fixed and helicoiled for $40 __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode