Mach 1 Engraved Fuel Door Available? - Page 2 - 2003-04 Mach 1 Registry Owners Club

TreyG870 · 12-09-2009, 03:39 PM

Quote:

Originally Posted by GRB60

Try here. I believe this was Dave's supplier:

http://www.dupontperformance.com/

They don't show the Mach one anymore but I'd try contacting them. They're nice quality if you can get one.

I'll call 'em. Thanks.

UIN2IT · 12-10-2009, 11:09 AM

Any Luck? I am interested too!

TreyG870 · 12-10-2009, 03:16 PM

I emailed them....still waiting to hear back.

mikeofwarr · 12-10-2009, 08:20 PM

Quote:

Originally Posted by 32VALVR

Available if anyones interested.

I bought this from 32VALVR and I installed it on mine last weekend. Looks great, the black was a little bit faded, but he told me that up front. I'm happy with it. I need to post up a positive for him.

Mustang9668 · 12-24-2009, 03:58 AM

I got one from the ebay link posted. They were back ordered until this past monday so he told me when he got them monday he would ship it out. Was sitting on the door step wednesday. Looks great. Can't wait to get it on.

1slomach · 12-24-2009, 03:16 PM

So they are selling them? How much was it? been trying to get one for a lil while now and have heard the run around from everyone....

DrkShadowGT · 12-24-2009, 08:54 PM

Quote:

Originally Posted by 1slomach

So they are selling them? How much was it? been trying to get one for a lil while now and have heard the run around from everyone....

ditto, I have been looking for one of these for at least a year, I checked the ebay add but no luck, curious to see if anyone else has info?

Bob03Mach1 · 12-29-2009, 12:11 PM

Sent an email to the ebay ad (billetconcepts) and they replied that they don't make the Mach 1 doors anymore

Seller has responded to your question about this item

Dear thun5der,

No, we no longer make them.
- billetconcepts Did this answer your question? If not, let the seller know.

From: thun5der
To: billetconcepts
Subject: thun5der has sent a question about item #180447845322, ending on Dec-31-09 08:42:34 PST - 94-04 01 02 03 MUSTANG GT COBRA BILLET FUEL GAS DOOR
Sent Date: Dec-24-09 08:48:29 PST
Dear billetconcepts,

Hi...someone told me that you used to sell fuel doors for Mach 1's, do you still have any?
- thun5der

94-04 01 02 03 MUSTANG GT COBRA BILLET FUEL GAS DOOR
Item Id:
180447845322
End time:
31-Dec-09 11:42:34 EST

Seller:

billetconcepts (862)
100.0% Positive Feedback
Member since 18-Oct-99 in United States
Location: FL, United States

Listing Status:
This message was sent while the listing was active.

Mustang9668 · 12-30-2009, 10:48 PM

I bought one from him the last week of november b/c the listing still said that you could specify mach 1 just like in the link 03Mach150BP posted on the first page. It took him almost a month to get it to me though cause he said he was waiting on it to come in. It shipped the monday before christmas though. Guess he just quit making them.

powershots · 12-31-2009, 04:49 PM

I guess no one wants to pay FORD a royalty

AzureMach1auto · 01-29-2010, 10:53 AM

Here are some to choose from

http://kooltang.com/store/

I wonder if a trophy place could engrave Mach 1 on the two tone.

Mustang9668 · 01-29-2010, 11:19 AM

That looks just like mine except that one is about $25 more lol. I'm sure you could get it engraved. That was my plan if I couldn't find one. Glad someone is still making them

03mach1 · 01-29-2010, 11:32 AM

Click on ANY listed above, they are ALL Out of stock.
(Nobody is making them anymore as stated).

Mustang9668 · 01-29-2010, 12:59 PM

Sounds like the best option is to buy a blank one and have it engraved.

Dave, you might know, do they have any coating on them that could get messed up by having them engraved?

Unrealford · 01-29-2010, 01:03 PM

Weird, I have many obsolete items on my car...:
Side window louvers

AFS wheels with stock finish

And now that gas cover lid.
All 3 items in this one picture

03mach1 · 01-29-2010, 01:35 PM

Normally they engrave them first, then Power Coat / Annodize them (black that it). AS for the others plain finish, not sure if they have a clear coat or not.

BOSS 58 · 01-29-2010, 02:29 PM

I checked this website http://kooltang.com/store/ and it say's they're out of stock........ anybody know another place to find them??

12-10-2009, 11:09 AM	#27
UIN2IT Doug aka "TK" Join Date: Nov 2007 Location: Goldsboro, NC Posts: 584	Re: Mach 1 Engraved Fuel Door Available? Any Luck? I am interested too! __________________ '03 Black Mach1 w/IUP - 5spd - 306rwhp 312rwtq - SCT Tuner ~ Air diverter ~ 1/2" Intake Spacer ~ CnL 85mm Maf & Trueflow pipe 18" Bullitts 255-40 & 295-35 ~ 10% Tint ~ Painted Calipers ~ Magnaflow Cat-back 3.5" Rolled Tips ~ '03 Cobra IRS ~ H&R/Eibach springs w/Bilstiens ~ FRPP 4.10 gears Mac Pro-Chamber ~ Hurst Short Throw Shifter ~ '01 Cobra Bumper w/Mach Chin spoiler WISH LIST:Full Length SFC's // 4pc March Pulleys // Ported Intake Manifold // Custom grind Cams

12-10-2009, 03:16 PM	#28
TreyG870 Registered User Join Date: Oct 2009 Location: Newton, NC Posts: 109	Re: Mach 1 Engraved Fuel Door Available? I emailed them....still waiting to hear back. __________________ TreyG870 2003 TR Mach 1

12-24-2009, 03:58 AM	#30
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 1,487	Re: Mach 1 Engraved Fuel Door Available? I got one from the ebay link posted. They were back ordered until this past monday so he told me when he got them monday he would ship it out. Was sitting on the door step wednesday. Looks great. Can't wait to get it on. __________________ 03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs

12-24-2009, 03:16 PM	#31
1slomach Registered User Join Date: Dec 2009 Location: Mechanicsville, Maryland Posts: 87	Re: Mach 1 Engraved Fuel Door Available? So they are selling them? How much was it? been trying to get one for a lil while now and have heard the run around from everyone.... __________________ Torch Red 04 Mach JLT Cold Air Intake BBK Twin 65mm TB BBK Longtubes BBK O/R H-pipe Mac Catback SCT3 Tuner *17x8 Factory wheels with 17x10.5s in the rear

12-29-2009, 12:11 PM	#33
Bob03Mach1 Registered User Join Date: Mar 2009 Location: Keswick, Ontario (about 45 miles north of Toronto) Posts: 194	Re: Mach 1 Engraved Fuel Door Available? Sent an email to the ebay ad (billetconcepts) and they replied that they don't make the Mach 1 doors anymore Seller has responded to your question about this item Dear thun5der, No, we no longer make them. - billetconcepts Did this answer your question? If not, let the seller know. From: thun5der To: billetconcepts Subject: thun5der has sent a question about item #180447845322, ending on Dec-31-09 08:42:34 PST - 94-04 01 02 03 MUSTANG GT COBRA BILLET FUEL GAS DOOR Sent Date: Dec-24-09 08:48:29 PST Dear billetconcepts, Hi...someone told me that you used to sell fuel doors for Mach 1's, do you still have any? - thun5der 94-04 01 02 03 MUSTANG GT COBRA BILLET FUEL GAS DOOR Item Id: 180447845322 End time: 31-Dec-09 11:42:34 EST Seller: billetconcepts (862) 100.0% Positive Feedback Member since 18-Oct-99 in United States Location: FL, United States Listing Status: This message was sent while the listing was active. __________________ Bob

12-30-2009, 10:48 PM	#34
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 1,487	Re: Mach 1 Engraved Fuel Door Available? I bought one from him the last week of november b/c the listing still said that you could specify mach 1 just like in the link 03Mach150BP posted on the first page. It took him almost a month to get it to me though cause he said he was waiting on it to come in. It shipped the monday before christmas though. Guess he just quit making them. __________________ 03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs

12-31-2009, 04:49 PM	#35
powershots Registered User Join Date: Oct 2007 Location: ny Posts: 348	Re: Mach 1 Engraved Fuel Door Available? I guess no one wants to pay FORD a royalty

01-29-2010, 10:53 AM	#36
AzureMach1auto Registered User Join Date: Jan 2007 Location: Stafford, VA Posts: 802	Re: Mach 1 Engraved Fuel Door Available? Here are some to choose from http://kooltang.com/store/ I wonder if a trophy place could engrave Mach 1 on the two tone. __________________ '03 Azure Mach 1: auto., IUP, JLT CAI. BUILD DATE:02/03/2003 Purchased: 01/02/07 '94 Mitsubishi 3000GT SL: 5-speed '87 IROC-Z: Crate 320rwhp Vortec T.P.I., many mods

01-29-2010, 11:19 AM	#37
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 1,487	Re: Mach 1 Engraved Fuel Door Available? That looks just like mine except that one is about $25 more lol. I'm sure you could get it engraved. That was my plan if I couldn't find one. Glad someone is still making them __________________ 03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs

01-29-2010, 11:32 AM	#38
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,804	Re: Mach 1 Engraved Fuel Door Available? Click on ANY listed above, they are ALL Out of stock. (Nobody is making them anymore as stated). __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788

01-29-2010, 12:59 PM	#39
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 1,487	Re: Mach 1 Engraved Fuel Door Available? Sounds like the best option is to buy a blank one and have it engraved. Dave, you might know, do they have any coating on them that could get messed up by having them engraved? __________________ 03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs

01-29-2010, 01:03 PM	#40
Unrealford Mustang owner since 1984 Join Date: Sep 2003 Location: Buffalo, NY Posts: 4,515	Re: Mach 1 Engraved Fuel Door Available? Weird, I have many obsolete items on my car...: Side window louvers AFS wheels with stock finish And now that gas cover lid. All 3 items in this one picture __________________ 2012 Kona Blue Metallic BOSS MOMS Racing... 11.92@115.43 stock besides drag radials http://www.dragzine.com/news/moms-ra...2013-schedule/

01-29-2010, 01:35 PM	#41
03mach1 Admin/Founder Join Date: Aug 2002 Location: Cuba, NY Posts: 6,804	Re: Mach 1 Engraved Fuel Door Available? Normally they engrave them first, then Power Coat / Annodize them (black that it). AS for the others plain finish, not sure if they have a clear coat or not. __________________ David J. Wagner Founder/Admin Member #0001 http://www.Mach1Registry.com http://www.Mach1Performance.org Amsoil T-1 Certified Independant Dealer Member, MCA '03 Mach 1, '08 V6 WIP, 76 Cobra II VIN#301788

01-29-2010, 02:29 PM	#42
BOSS 58 Registered User Join Date: Apr 2008 Location: Brownsville, Tx. Posts: 22	Re: Mach 1 Engraved Fuel Door Available? I checked this website http://kooltang.com/store/ and it say's they're out of stock........ anybody know another place to find them??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)