2003-04 Mach 1 Registry Owners Club  

Best Mustang Parts

Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Tuning & Dyno Testing/Results

Tuning & Dyno Testing/Results Questions, experiences & results for electronic tuning and dyno tests

Reply
 
Thread Tools Display Modes
Old 01-26-2005, 11:07 AM   #26
meist@steeda.ca
Guest
 
Join Date: Jan 2005
Posts: 17
Re: What to do to get 300 rwhp on a Mach 1

We offer a chip and CAI kit that will put you over 300rwhp/tq

Also, adding exhaust helps!
meist@steeda.ca is offline   Reply With Quote
Old 01-26-2005, 11:32 AM   #27
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

What the CAI look like? What's the design?

Most Mach's baseline around 270 rwhp, I find it hard to believe that a chip and a CAI would generate 30+ rwhp on a stock mach with no exhaust.
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 01-26-2005, 11:34 AM   #28
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

You have Dyno sheets to prove this?
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 01-26-2005, 01:22 PM   #29
blazinsteed
MUSTANG ADDICT
 
blazinsteed's Avatar
 
Join Date: Oct 2003
Location: orlando fl
Posts: 2,471
Re: What to do to get 300 rwhp on a Mach 1

you would be suprised. I have got a k&n cai and off road x and I was.

Roger
__________________
I h8te rice
www.ricehatersclub.com
http://www.mach-1.org/photopost/data...gchop.jpg?6184
03 zinc yellow mach 1
292 rwh 318.2 rwt (XPIPE/XCAL2)
iup/astra louvers/short ant./k&nfipk/bassani offroad x/sct xcal 2/powdercoated wheels/interior dressup/15% tint..
1 of 869
born 06/13/03 (thanks donna)
that is a friday the 13th should I be
worried
www.perfectionperformance.com (my clubs website)
blazinsteed is offline   Reply With Quote
Old 01-26-2005, 02:50 PM   #30
Fosters
LS1-stock
 
Fosters's Avatar
 
Join Date: Dec 2003
Location: Chandler, AZ
Posts: 1,550
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by southbeachmach1
Yeah SAE is like 293
For the same run, my uncorrected is actually 299 and it was a pretty average South Florida day....humidity and warm - it was mid summer.

Interesting how your turning that much w/o the intake spacer and no-catback/mufflers...


What was your baseline stock? I started from like 267 (SAE)
baseline, bone stock, was 273.3/298.5 SAE. the run conditions on my tune day were 76F 28.79in-Hg, and 32% humidity, so a bit more humid than average arizona day...

I also have 4.30s, 31 spline axles/tlok, and 10.5" wheels, which add quite a bit of unsprung weight, eating up a few hp. I figure an aluminum driveshaft and later on a flywheel will offset those


Quote:
Originally Posted by southbeachmach1
What the CAI look like? What's the design?

Most Mach's baseline around 270 rwhp, I find it hard to believe that a chip and a CAI would generate 30+ rwhp on a stock mach with no exhaust.
i agree. however, i can sort of see it happen, but not with a safe tune, and maybe on a factory freak (i've seen a few machs dyno 285s stock). Keep in mind, this is Steeda, where underdrive pulleys add 12hp, and the same company that tried to market flexible subframe connectors...
__________________
2013 gt - TBD
2004 mach1 - 12.31@110.17, 1.645 60' - SOLD

Last edited by Fosters; 01-26-2005 at 07:35 PM.
Fosters is offline   Reply With Quote
Old 02-06-2005, 09:55 AM   #31
crimsongt
Trailor Park Pimpin
 
crimsongt's Avatar
 
Join Date: Nov 2004
Location: West Georgia
Posts: 377
Re: What to do to get 300 rwhp on a Mach 1

My mach ran good when I bought it, but I had to put the parts on. First I put on my Catted prochamber, it made a little difference. Second I put on my C&l 85mm mass air and and intake tube, once again could tell a difference. Next I welded cutouts in front of my mufflers, made a noticable difference. Next I switched to Royal Purple synthetic, some say it makes a difference and some say it doesn't, well I'm a believer my engine ran a little smoother and maybe hair more performance. Next I repalced stock catback and cutouts with Borla Stingers not much different than having cutouts open. Sixth removed cats by welding pipes in place, once again noticable difference in performance and sound. Next I put Steeda underdrive pullies on, I could not tell a difference. Last I got Tim Barth at Modular Powerhouse to dyno tune my car using SCT flasher, big difference. Baseline dyno with all mods except SCT tune I put down 303rwhp STD but corrected it came to 291rwhp SAE and 316rwtq SAE. After a few pulls to get timing and air/fuel corrected (was 14 to 1 or higher) The new numbers came out at 308rwhp SAE. We decided to let engine cool down and see how high the numbers would go. With air/fuel set at 13 to 1 give or take a little my car put down 312.6rwhp SAE and 339.9rwtq SAE. That is how I got into the 300rwhp game.
__________________
2003 Mach 1
Check out WWW.MUSTANGMAFIA.COM
crimsongt is offline   Reply With Quote
Old 02-06-2005, 04:37 PM   #32
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

Get a JLT RAI and an intake spacer.... cheap mods and easy to install you should get at least 10 RWHP and some more torque. I personally think the C&L is not a good idea so I haven't messed with it. That Borla Stinger seems to be helping, and not just making it louder. I may change the catback out eventually. I like the sound and look of the bassani pipes, but the dyno's numbers is where it all counts.
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 02-06-2005, 05:28 PM   #33
crimsongt
Trailor Park Pimpin
 
crimsongt's Avatar
 
Join Date: Nov 2004
Location: West Georgia
Posts: 377
Re: What to do to get 300 rwhp on a Mach 1

I'm doing php spacer next month, still debating hooker long tubes, knooks longtubes, or bassani midlength. Eventually electric waterpump and a kenne bell boost-a-spark. I want to try and get to 335rwhp SAE with boltons. It might be possible, only one way to find out. I think the Borla catback outflows bassani catback, I noticed my Borla stingers are 3 inch mufflers fitted to 2.5 inch pipe. I do like the sound of bassani pipes better. I'm curious about if JLT pipe and if x pipe would make more HP but I do not want to lose any torque.
__________________
2003 Mach 1
Check out WWW.MUSTANGMAFIA.COM
crimsongt is offline   Reply With Quote
Old 02-07-2005, 11:38 PM   #34
TheBlkMach1
Cobra killer.
 
TheBlkMach1's Avatar
 
Join Date: Jul 2004
Location: west palm beach, FL
Posts: 2,526
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by southbeachmach1
I personally think the C&L is not a good idea so I haven't messed with it.
C'mon Jeff. You know i've got the C&L and my car seems to be running good. Take a chance. :LAUGH:
__________________
Need2speeD.com
TheBlkMach1 is offline   Reply With Quote
Old 04-30-2005, 11:42 AM   #35
xMach
Registered User
 
xMach's Avatar
 
Join Date: Mar 2005
Posts: 258
Re: What to do to get 300 rwhp on a Mach 1

I have the C&L on my car and it ran a bit lean but i could feel a difference in performance. However, James over at Runnin With The Devil thinks that is worthless and told me that the stock maf is good till 400 hp and the screen isnt a restriction until the 350 hp mark. I think ill listen to james and put the stock maf in but leave the screen out. I always felt that throtle improved with the screen out. James sad that that would be ok. It sucks that i have to take the C&L out, but if the custom tune will give me more power without it, then ill gladly take it out.
__________________
2003 black mach 1 5 speed


mods

slp off road x pipe
slp loudmouth
jlt rai
mgw shifter with t handle
php spacer
tokico 5 way adjustable in the front
mm caster and camber plates
mm adjustable rear control arms
eibach sportline springs. yeah its kind of low.
raptor shift light. too bright.
frpp 410 gears at last.
nx 100 shot with rwtd tune
stock rear axles
xMach is offline   Reply With Quote
Old 04-30-2005, 01:16 PM   #36
orangemachracer
Registered User
 
orangemachracer's Avatar
 
Join Date: Feb 2005
Location: bethlehem
Posts: 261
Re: What to do to get 300 rwhp on a Mach 1

i dont mean to sound stupid but what is this php spacer sombody explain what it does where i can get it and so on
__________________
2001 mustang GT tork tech eaton swap, built rear, 370 hp 428 tourqe, 12.2 @114 1.7 60 ft
orangemachracer is offline   Reply With Quote
Old 05-03-2005, 04:42 PM   #37
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

The PHP intake spacer goes underneith the upper part of your intake manifold. It raises the top cover of the intake manifold up about 1/2 inch. I believe this allows a greater volume of air into the intake (someone correct me if I'm wrong). Its a cheap and well worth it do it yourself mod.

The only part that sucks about the install is getting that darn EGR to mount back up correctly. Let me know if you need pictures.
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 05-14-2005, 09:23 PM   #38
daddy rob
TWISTED MARINE
 
daddy rob's Avatar
 
Join Date: Nov 2004
Location: Olathe Kansas
Posts: 131
Re: What to do to get 300 rwhp on a Mach 1

i put on off road pro chamber and slp cat back and i got 303 hp and 319 tq
__________________
  • catless pro chamber,loudmouth catback,frpp alum flywheel,frpp king cobra clutch,frpp alum d/s,mgw short throw,frpp 31 spline tracloc,frpp 3.73 gears,strange 31 spline axles,sloted cross drilled rotors,hawk brake pads,mm tube k member,a arms, adj lca,panhard bar,strut tower brace,frame conectors,tq arm and c/c plates,bilstein struts/hyper coilover front,bilstein hr springs rear,motoblue hp series fuelrails,bullit rims,nitto drag rears,fram air hog filter,all royal purple oils
daddy rob is offline   Reply With Quote
Old 05-15-2005, 01:20 AM   #39
ZincYellowMach
12 second club
 
ZincYellowMach's Avatar
 
Join Date: May 2005
Location: Pickerington, Ohio
Posts: 29
Re: What to do to get 300 rwhp on a Mach 1

I have offroad Prochamberand K&N drop in filter... 304rwhp SAE and 333 RWTQ SAE
__________________
2003 Mustang Mach 1
Stock with a Prochamber H pipe 12.5 @ 109.14 on Nitto DR's.
304 rwhp and 333 rwtq
Click here for Pics, Timeslips, Dyno sheet and video
CLICK HERE FOR 12.5 VIDEO
ZincYellowMach is offline   Reply With Quote
Old 05-26-2005, 11:38 AM   #40
southbeachmach1
Registered User
 
southbeachmach1's Avatar
 
Join Date: May 2004
Location: Palm City, FL
Posts: 208
Re: What to do to get 300 rwhp on a Mach 1

sounds like the offroad prochamber is yeilding some serious numbers....
__________________
2004 Cobra Terminator
Bone Stock

Former Vehicles
2003 Mach 1 Oxford White - Sold April 2011

May the new owner, enjoy her as I did....
southbeachmach1 is offline   Reply With Quote
Old 05-26-2005, 12:28 PM   #41
crimsongt
Trailor Park Pimpin
 
crimsongt's Avatar
 
Join Date: Nov 2004
Location: West Georgia
Posts: 377
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by ZincYellowMach
I have offroad Prochamberand K&N drop in filter... 304rwhp SAE and 333 RWTQ SAE
your car is a freak!!!!
Off road prochamber working for me too
__________________
2003 Mach 1
Check out WWW.MUSTANGMAFIA.COM
crimsongt is offline   Reply With Quote
Old 06-06-2005, 05:03 AM   #42
SickBlackMach
Resident Beavis
 
SickBlackMach's Avatar
 
Join Date: Apr 2005
Location: Beavercreek, OH
Posts: 971
Re: What to do to get 300 rwhp on a Mach 1

just another question... who here has an auto, and who has a stick? I know some of you have it posted in your sigs but others dont
__________________
2003 Black Cobra 'Vert
MileHi Tuned
BilletFlow 2.93 NonSlip, Steg Stage IV Eaton w/BF TB/plenum
JLT CF CAI, LFP 4lb lower, 100mm R/R Idlers
NGK TR7ix's, 100mm BF Aux idler,
Bassani Mids, X, and AftCat, MGW Shifter, BF IRS Diff Brace (Black)
LFP Dual Pass H/E and LFP IC Res, MM FLSFC
H&R Race springs, Redline hood shocks,
18x9.9/18x11 CCW 505a's
265/35 and 335/30 BFGoodrich KDWII's
SS Cobra inserts, Sirius
I'm sure there's more I have forgotten too!
SickBlackMach is offline   Reply With Quote
Old 10-28-2005, 01:45 AM   #43
Mongoose Mach
Guest
 
Mongoose Mach's Avatar
 
Join Date: Oct 2005
Location: Chandler, AZ
Posts: 15
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by Fosters
i agree. however, i can sort of see it happen, but not with a safe tune, and maybe on a factory freak (i've seen a few machs dyno 285s stock). Keep in mind, this is Steeda, where underdrive pulleys add 12hp, and the same company that tried to market flexible subframe connectors...
Fosters - on your indirect recomendation, I took my car to Az Dyno chip. Dynoed 282 with a k&n drop in. 296ish with mac o/r pro and exhaust. Still trying to work out some bottle issues to get her over 400...

Life is good with the factory freak
Mongoose Mach is offline   Reply With Quote
Old 12-05-2005, 04:10 PM   #44
gotmach
Registered User
 
gotmach's Avatar
 
Join Date: Aug 2002
Location: Lynchburg Va.
Posts: 2,046
Re: What to do to get 300 rwhp on a Mach 1

Off Road Pro-chamber Keeps The Torque In Line Because The Chamber Keeps The Back Psi In Line! No Poping On Downshifts Either.. Love The Sound
__________________
GOT MACH ? "does your body good"
gotmach is offline   Reply With Quote
Old 02-21-2006, 08:12 AM   #45
04mach_man
Registered User
 
Join Date: Feb 2006
Location: El paso
Posts: 247
Re: What to do to get 300 rwhp on a Mach 1

guys, I have been reading your blog i have heard of many mustangs dyno at 265 and some at 280. I have been slowly modifying mine i have SLP cat back, K&N slip in filter with the fender tube removed, and i ported my intake from top to bottom, currently i ampersuing a 10psi procharger system, and a tru x pipe maybe a DR.gas. anyone try a DR.GAS?
04 MACH_MAN
04mach_man is offline   Reply With Quote
Old 02-21-2006, 08:25 AM   #46
shakinmach03
300+ WHP Club
 
shakinmach03's Avatar
 
Join Date: Oct 2005
Location: Killeen TX
Posts: 264
Re: What to do to get 300 rwhp on a Mach 1

Bassani O/R X pipe, Mac cat-back, drop in K&N filter.........309hp/324trq. Sunshine Top and Accessories, Dynojet. Killeen TX
__________________
2003 Zinc Yellow Mach
309hp/324trq with exhaust only.
13.03@104.97 1.9 60ft
shakinmach03 is offline   Reply With Quote
Old 02-21-2006, 09:29 AM   #47
20Mach03
Registered User
 
Join Date: Aug 2005
Posts: 38
Re: What to do to get 300 rwhp on a Mach 1

Quote:
Originally Posted by shakinmach03
Bassani O/R X pipe, Mac cat-back, drop in K&N filter.........309hp/324trq. Sunshine Top and Accessories, Dynojet. Killeen TX
Where is sunshine top and Accessories? I have An 03 mach that i would like dynoed. Do they adjust A/F? How much? Thanks
20Mach03 is offline   Reply With Quote
Old 03-24-2006, 11:38 AM   #48
rsdunphy
Registered User
 
rsdunphy's Avatar
 
Join Date: Mar 2004
Location: Yucaipa, ca
Posts: 92
Re: What to do to get 300 rwhp on a Mach 1

I would like to chip the mach, any suggestions out there??
__________________
Ex Owner:

2004 Azure Blue Mach 1
5 Speed
K&N Aircharger
Roush Stage 3 Suspension
Steeda Race Wing
Goodyear Eagle F1's, 255's Front, 315's Rear
MRT 10.5" Rear Bullits,9" Front Bullits
ROTORPRO's Slotted Rotors
Raised Shaker Hood 1/4 Inch
Build date 02/23/2004
rsdunphy is offline   Reply With Quote
Old 03-24-2006, 03:53 PM   #49
JDraper
On Permanant Vacation
 
JDraper's Avatar
 
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 4,924
Re: What to do to get 300 rwhp on a Mach 1

I've got a Borla Cat Back, RWTD Tune, C&L CAI/MAF, PHP intake spacer and a Meziere electric water pump and I'm putting down 302rwhp.
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun..
04 Mach 1
18 Ford Explorer XLT
17 Mustang GT/CS Convertible
16 Fusion SE AWD Ecoboost
10 Fusion SE V6
66 289 Mustang Hardtop Restomod
State College Mustangs
Our Crappy Website
JDraper is offline   Reply With Quote
Old 03-24-2006, 05:40 PM   #50
03mach1
Admin/Founder
 
03mach1's Avatar
 
Join Date: Aug 2002
Location: Cuba, NY
Posts: 6,778
Re: What to do to get 300 rwhp on a Mach 1

MRT CAI, K&N, Pro-M Meter, MRT Single Cat and Maganflow Mufflers, I have 289hp @ rear wheels. Stock Tune.
__________________
David J. Wagner
Founder/Admin Member #0001
http://www.Mach1Registry.com
http://www.Mach1Performance.org
Amsoil T-1 Certified Independant Dealer
Member, MCA
'03 Mach 1, '08 V6 WIP, 76 Cobra II
VIN#301788
03mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:33 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<