The Official MISSOURI Thread - Page 3 - 2003-04 Mach 1 Registry Owners Club

machIntcptr · 01-08-2007, 12:37 PM

The saturday of Labor day weekend.

STLMachSpeed03 · 01-10-2007, 08:17 AM

Quote:

Originally Posted by E-MACH

What's the date on that Jamestown show? Is it come one, come all, or is there some theme? As far as winter driving goes, hey I'm driving as long as there isn't salt and snow on the road. I fixed enough rusty cars in this lifetime, so I have a big problem with the salt. I simply can't NOT drive my car, but I'm a driver not a polisher. Ya, I keep it clean, but c'mon, owning a Mach 1 is all about driving it. The next owner can futz with it if they want to. If you think about it, these are unique cars, but they're not exotic, and we didn't plunk down a fortune... so I say ENJOY 'em... life is too short! So when and where are we circling the herd???

Amen

machIntcptr · 01-14-2007, 08:48 AM

Oh don't get me wrong I drive the living s__t out of mine. I actualy will give one that is driven the benefit of a doubt over a trailer queen/permanent show car any day of the week. alot of the folks with trailer queens have alot more financial resources than the regular day kind of guys, that just cleans his car to show it off.

STLMachSpeed03 · 01-16-2007, 07:56 AM

w00t for knockn' Machs!!!

MyLittlePony · 01-16-2007, 08:25 AM

Knocking? You spin a rod bearing? Stretch a journal?

STLMachSpeed03 · 01-17-2007, 09:43 AM

Quote:

Originally Posted by MyLittlePony

Knocking? You spin a rod bearing? Stretch a journal?

Dont know yet. I've had a couple people look at it, both with different "theories". One says that it could be a rod knocking and the other says that it's comming more from the valve train. It's kinda hard to tell without tearing into the motor. I've pretty much quit driving it for now. I went and bought an extended warranty on the car which covers it up to 120,000. Hopefully it pays off.

STLMachSpeed03 · 01-21-2007, 01:17 PM

So is anyone going to the St Louis auto show?

YELLOW_STL_MACH · 02-14-2007, 11:34 PM

Mach1BullittMan · 02-17-2007, 08:58 PM

Quote:

Originally Posted by YELLOW_STL_MACH

What do you want ?

YELLOW_STL_MACH · 02-17-2007, 09:01 PM

Quote:

Originally Posted by Mach1BullittMan

What do you want ?

Just putting a post in the MO post.

Mach1BullittMan · 02-18-2007, 08:55 AM

Quote:

Originally Posted by YELLOW_STL_MACH

Just putting a post in the MO post.

Me to then.

STLMachSpeed03 · 03-14-2007, 01:56 AM

Well I'm out for now. I sold the Mach this morning and am getting a truck. I'm going to miss it sooooooo much but some things have come about and I needed to get rid of it. I'll buy another one later on 4sho!!

MyLittlePony · 03-14-2007, 08:53 AM

Bummer you sold the car.

Longtube install is this weekend at my house.
Pm if you want to watch or help.

I should be on the road after the install for a couple weeks
before I start the blower install.

YELLOW_STL_MACH · 03-14-2007, 01:01 PM

Quote:

Originally Posted by MyLittlePony

before I start the blower install.

****! You don't mess around.:ORANGE:

2k4mk1 · 03-14-2007, 03:37 PM

Keep an Eye out for a silver 05GT MO Lic "WLD RYD"
She is a Friend of mine if ya see her tell her the "donger" said hey.
Her name is Liz and she is a "car chick" just had a Saleen screw blower installed on her car a couple weeks ago so beware guys.

YELLOW_STL_MACH · 03-14-2007, 03:42 PM

Quote:

Originally Posted by 2k4mk1

Keep an Eye out for a silver 05GT MO Lic "WLD RYD"
She is a Friend of mine if ya see her tell her the "donger" said hey.
Her name is Liz and she is a "car chick" just had a Saleen screw blower installed on her car a couple weeks ago so beware guys.

What part of the STL is she in?

E-MACH · 03-14-2007, 03:52 PM

Quote:

Originally Posted by 2k4mk1

Keep an Eye out for a silver 05GT MO Lic "WLD RYD"
She is a Friend of mine if ya see her tell her the "donger" said hey.
Her name is Liz and she is a "car chick" just had a Saleen screw blower installed on her car a couple weeks ago so beware guys.

Any gal that uses a "screw blower" is a friend of mine. http://www.mach1registry.org/forums/.../a_smil091.gif

2k4mk1 · 03-14-2007, 04:50 PM

Quote:

Originally Posted by YELLOW_STL_MACH

What part of the STL is she in?

Not sure but I beleive its the southern end. She doesnt live in STL proper

Mad_Mach_1 · 03-28-2007, 01:40 AM

bump, just because i finally found this thread
in west county yo

Mad_Mach_1 · 03-30-2007, 08:59 PM

anyone know someone good around st.louis go get a tune done at?

mach_12003 · 05-08-2007, 07:52 PM

mustang muscle in high ridge

MyLittlePony · 05-08-2007, 09:11 PM

I would go to www.midcoastperformance.com

They do great work and have a nice facility.

YELLOW_STL_MACH · 05-08-2007, 11:21 PM

Quote:

Originally Posted by MyLittlePony

I would go to www.midcoastperformance.com

They do great work and have a nice facility.

+1

NoChew_Blue03 · 05-14-2007, 12:48 PM

Did not even know they were there - thanks!

Mad_Mach_1 · 06-28-2008, 11:10 PM

bump bada bump bump bump

01-08-2007, 12:37 PM	#51
machIntcptr Registered User Join Date: Dec 2006 Location: mid missouri Posts: 38	Re: The Official MISSOURI Thread The saturday of Labor day weekend. __________________ ford racing 4.10's frrp aluminum drive shaft Diablo.predator c and l pipe chrome moly upper and lower control arms Roy's racing phenelic intake spacer and a polished intake 295rwhp 318 tqu weapon x cop jba headers stallion converter multi disk lockup 3000 stall magna packs. 12.9 106mph

01-14-2007, 08:48 AM	#53
machIntcptr Registered User Join Date: Dec 2006 Location: mid missouri Posts: 38	Re: The Official MISSOURI Thread Oh don't get me wrong I drive the living s__t out of mine. I actualy will give one that is driven the benefit of a doubt over a trailer queen/permanent show car any day of the week. alot of the folks with trailer queens have alot more financial resources than the regular day kind of guys, that just cleans his car to show it off. __________________ ford racing 4.10's frrp aluminum drive shaft Diablo.predator c and l pipe chrome moly upper and lower control arms Roy's racing phenelic intake spacer and a polished intake 295rwhp 318 tqu weapon x cop jba headers stallion converter multi disk lockup 3000 stall magna packs. 12.9 106mph Last edited by machIntcptr; 01-14-2007 at 01:56 PM.

01-16-2007, 07:56 AM	#54
STLMachSpeed03 Registered User Join Date: May 2006 Location: Arnold, Missouri Posts: 75	Re: The Official MISSOURI Thread w00t for knockn' Machs!!! __________________ Mach GONE...

01-16-2007, 08:25 AM	#55
MyLittlePony OG Mach1Misfit Join Date: Apr 2004 Location: Ofallon, MO Posts: 1,543	Re: The Official MISSOURI Thread Knocking? You spin a rod bearing? Stretch a journal?

01-21-2007, 01:17 PM	#57
STLMachSpeed03 Registered User Join Date: May 2006 Location: Arnold, Missouri Posts: 75	Re: The Official MISSOURI Thread So is anyone going to the St Louis auto show? __________________ Mach GONE...

02-14-2007, 11:34 PM	#58
YELLOW_STL_MACH Registered User Join Date: Jul 2006 Location: St. Louis, MO Posts: 515	Re: The Official MISSOURI Thread

03-14-2007, 01:56 AM	#62
STLMachSpeed03 Registered User Join Date: May 2006 Location: Arnold, Missouri Posts: 75	Re: The Official MISSOURI Thread Well I'm out for now. I sold the Mach this morning and am getting a truck. I'm going to miss it sooooooo much but some things have come about and I needed to get rid of it. I'll buy another one later on 4sho!! __________________ Mach GONE...

03-14-2007, 08:53 AM	#63
MyLittlePony OG Mach1Misfit Join Date: Apr 2004 Location: Ofallon, MO Posts: 1,543	Re: The Official MISSOURI Thread Bummer you sold the car. Longtube install is this weekend at my house. Pm if you want to watch or help. I should be on the road after the install for a couple weeks before I start the blower install.

03-14-2007, 03:37 PM	#65
2k4mk1 Lakers beat our butts Join Date: Jan 2004 Location: San Antonio TX Posts: 2,889	Re: The Official MISSOURI Thread Keep an Eye out for a silver 05GT MO Lic "WLD RYD" She is a Friend of mine if ya see her tell her the "donger" said hey. Her name is Liz and she is a "car chick" just had a Saleen screw blower installed on her car a couple weeks ago so beware guys. __________________ SPURS ARE NBA 07 CHAMPS!!!,but we wont be in 08 04 Oxford White 5 Spd with IUP K&N Aircharger Borla Stingers SLP Catted X Steeda Tri-Ax SCT flash tune. Drilled/Slotted rotors all 4 corners. 283rwhp (Mustang Dyno) 306rwhp (sae on Dynojet) D/O/B 12-05-03 Del. 01-21-04

03-28-2007, 01:40 AM	#69
Mad_Mach_1 Registered User Join Date: Sep 2006 Location: St. Louis, MO Posts: 109	Re: The Official MISSOURI Thread bump, just because i finally found this thread in west county yo __________________ 04 Azure Blue - Astra Louvers - CDC Honey Comb Panel - JLT Cold Air Intake - Diablo Predator 1970 Mach 1 - 351 Cleveland

03-30-2007, 08:59 PM	#70
Mad_Mach_1 Registered User Join Date: Sep 2006 Location: St. Louis, MO Posts: 109	Re: The Official MISSOURI Thread anyone know someone good around st.louis go get a tune done at? __________________ 04 Azure Blue - Astra Louvers - CDC Honey Comb Panel - JLT Cold Air Intake - Diablo Predator 1970 Mach 1 - 351 Cleveland

05-08-2007, 07:52 PM	#71
mach_12003 Registered User Join Date: Mar 2007 Location: st louis mo Posts: 138	Re: The Official MISSOURI Thread mustang muscle in high ridge

05-08-2007, 09:11 PM	#72
MyLittlePony OG Mach1Misfit Join Date: Apr 2004 Location: Ofallon, MO Posts: 1,543	Re: The Official MISSOURI Thread I would go to www.midcoastperformance.com They do great work and have a nice facility.

05-14-2007, 12:48 PM	#74
NoChew_Blue03 phones + drivers = danger Join Date: Nov 2005 Location: southern Illinois Posts: 269	Re: The Official MISSOURI Thread Did not even know they were there - thanks!

06-28-2008, 11:10 PM	#75
Mad_Mach_1 Registered User Join Date: Sep 2006 Location: St. Louis, MO Posts: 109	Re: The Official MISSOURI Thread bump bada bump bump bump __________________ 04 Azure Blue - Astra Louvers - CDC Honey Comb Panel - JLT Cold Air Intake - Diablo Predator 1970 Mach 1 - 351 Cleveland

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)