Procharged Mach - 2003-04 Mach 1 Registry Owners Club

kyleXkilljoy · 04-09-2016, 06:16 PM

Put a D1 on the mach, 5.30 PSI made 430 hp.

Besides the procharger, car has long tubes, catted X, flows.

Rob04Mach1 · 04-09-2016, 08:33 PM

CONGRATS & Here Here to Procharged Mach's

DSG2003Mach1 · 04-09-2016, 08:46 PM

very nice!

Especially for not even 6psi

blk 04 mach 1 · 04-09-2016, 09:38 PM

kylexkilljoy stock block?

kyleXkilljoy · 04-10-2016, 04:31 AM

Quote:

Originally Posted by blk 04 mach 1

kylexkilljoy stock block?

Yes, stock longblock.

JCal · 04-10-2016, 07:56 AM

Quote:

Originally Posted by Rob04Mach1

CONGRATS & Here Here to Procharged Mach's

Rob04Mach1, that's a really clean install! I really like the piping to the throttle body, where did you get that? I've got a vortec set up that I've pieced together. Have everything except fuel pump and some piping to make it work. Did an install on my son's 2V years ago and never really liked the way some of the piping fit, especially where it came from the intercooler, snaked through the fender well and to the MAF and throttle body. I like the way yours fits rather than a straight shot to a rubber elbow. Are those Procharger parts or did you get them somewhere else?Jim

NastyNate · 04-10-2016, 08:10 AM

Nice numbers!

not a gt · 04-10-2016, 09:23 PM

Great numbers at such a mild psi..congrats and enjoy..I liked my P 1, but now....

DSG2003Mach1 · 04-10-2016, 09:41 PM

Jcal - that looks like the usual procharger stuff. The elbow is nice but the pipe after it stinks because of some bends, can't just put a slot style maf in there

sutyak · 04-11-2016, 07:50 AM

Car looks great. I love the white Machs.

kyleXkilljoy · 04-11-2016, 12:20 PM

I also lied a bit after looking at the graph.

440/412 @ 5.30 PSI is what it actually made.

311-420 · 04-11-2016, 01:11 PM

Very good! What's your exhaust setup?

kyleXkilljoy · 04-12-2016, 12:24 AM

Quote:

Originally Posted by 311-420

Very good! What's your exhaust setup?

Long tubes, catted x, flow 40s.

The catted x and 40s are leaving soon.

BONESTOCK · 05-07-2016, 03:52 PM

Welcome to the fam!!

https://goo.gl/photos/MZFJP24xqeespbms7

batmobile · 05-31-2016, 03:35 AM

whats your fuel setup?

BONESTOCK · 05-31-2016, 07:26 AM

Quote:

Originally Posted by batmobile

whats your fuel setup?

Mine is 39lb injectors, cobra tank and pumps.

04-09-2016, 06:16 PM	#1
kyleXkilljoy Registered User Join Date: Dec 2015 Location: Aggieland, TX Posts: 4	Procharged Mach Put a D1 on the mach, 5.30 PSI made 430 hp. Besides the procharger, car has long tubes, catted X, flows.

04-09-2016, 08:33 PM	#2
Rob04Mach1 Registered User Join Date: Dec 2015 Location: Selden, NY Posts: 96	Re: Procharged Mach CONGRATS & Here Here to Procharged Mach's __________________ 04 Mach 1, Aluminum 4.6L DOHC w/Procharger P1SC & Stage II 3 Core Intercooler Level 10 4R70W, Convertor, 8.8 w/3.5 Posi, Snow Perf Stage 2 Methanol Injection

04-09-2016, 08:46 PM	#3
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Procharged Mach very nice! Especially for not even 6psi __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

04-09-2016, 09:38 PM	#4
blk 04 mach 1 Registered User Join Date: Dec 2008 Location: Hallsville Texas Posts: 953	Re: Procharged Mach kylexkilljoy stock block?

04-10-2016, 08:10 AM	#7
NastyNate Registered User Join Date: Mar 2008 Location: Jersey Shore Posts: 1,349	Re: Procharged Mach Nice numbers!

04-10-2016, 09:23 PM	#8
not a gt Registered User Join Date: Mar 2007 Location: Waaayy out in the country,leave your GPS at home! Posts: 4,825	Re: Procharged Mach Great numbers at such a mild psi..congrats and enjoy..I liked my P 1, but now.... __________________ 2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq

04-10-2016, 09:41 PM	#9
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Procharged Mach Jcal - that looks like the usual procharger stuff. The elbow is nice but the pipe after it stinks because of some bends, can't just put a slot style maf in there __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

04-11-2016, 07:50 AM	#10
sutyak it's soo-tack Join Date: Nov 2002 Location: Fairmont, WV Posts: 2,082	Re: Procharged Mach Car looks great. I love the white Machs. __________________ mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold)

04-11-2016, 12:20 PM	#11
kyleXkilljoy Registered User Join Date: Dec 2015 Location: Aggieland, TX Posts: 4	Re: Procharged Mach I also lied a bit after looking at the graph. 440/412 @ 5.30 PSI is what it actually made.

04-11-2016, 01:11 PM	#12
311-420 Can't be bridled Join Date: Sep 2007 Location: Texas Posts: 7,006	Re: Procharged Mach Very good! What's your exhaust setup? __________________ 2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁

05-07-2016, 03:52 PM	#14
BONESTOCK Registered User Join Date: Jul 2004 Location: Raleigh , NC Posts: 2,093	Re: Procharged Mach Welcome to the fam!! https://goo.gl/photos/MZFJP24xqeespbms7 __________________ 2004 Torch Red Procharged Mach 1

05-31-2016, 03:35 AM	#15
batmobile Registered User Join Date: Dec 2011 Location: tulsa ok Posts: 73	Re: Procharged Mach whats your fuel setup?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)