2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 02-14-2010, 09:33 AM   #326
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

i just think it would get more attention that way. also like i said take more pictures but spread em out that way everyone looking at them can get a better look a each part. not tryin to be mean but they were bunch togather and with the eaton swap kit there is so many parts to go with it. good luck though. you could also pm some of the guys on here that are real experiance and ask them to check out your thread, 3 off the top of my mind lookngo, reloaded, and machgsxr. they seem to know the kit from front to back
ASH302 is offline   Reply With Quote
Old 02-20-2010, 02:20 PM   #327
vtecDIS
hunt'n for chevy's
 
vtecDIS's Avatar
 
Join Date: May 2006
Location: Southern CA
Posts: 660
Re: Eaton Swap.....

i got some guy selling an Eaton from a Harley Davidson F150... do any of your Eaton Swap Guru's know if it will fit on our Mach's? dont know if it looks complete either, but he's asking $2k OBO

He said it includes all bolts,brakets,vac lines ,hoeses, belt,waterpump,belt,drive pullys,crank pully,injectors,intake manifold,lifters,push rods,camshafts,throtle body all bolts needed incl. It was on the truck for a short time not even 2,000 on truck when taken off becouse of an after maket supercharger and has been storaged since 2003 thats the same year of the truck,It will fit any 4.6L or 5.4L V8 from1997 to 2004 ford engines 281cu.block and 331cu.block

here are pics..
Attached Thumbnails
3k53ma3p95O65Pa5S5a2dc6660c8b934a1e17.jpg   3n23m83o05T75P15S5a2d1b4e61d39ba81392.jpg   3n73o53l85O45P55Raa2d03f242cc3f9d1c45.jpg   3nc3pd3of5O05Tc5Rda2dc03902e8b9cb17b1.jpg  
__________________
2003 Torched Mach1, IUP, 5spd
My Mach is for sale.. http://www.mach1registry.org/forums/...d.php?t=108311
2002 Trans Am WS6 M6. Sold but not forgotten
vtecDIS is offline   Reply With Quote
Old 02-20-2010, 03:15 PM   #328
nickster
certified MACH 1 nut
 
nickster's Avatar
 
Join Date: Apr 2004
Location: nova scotia canada
Posts: 1,520
Re: Eaton Swap.....

well if your mach has a 2 valve in it ,that is the setup for you
__________________
shm stage 2 cams,dynomax longtubes,2 3/4 h pipe homemade,excal2,wideband commander,proracers package,60#injectors,2400 mas air,eaton,forged motor,4# metco ring,1 of a kind pully bridge,and great #s on a stock eaton 476.88rwhp-451.74rwtq
nickster is offline   Reply With Quote
Old 02-20-2010, 04:34 PM   #329
Scott McClure
Mach1 member
 
Scott McClure's Avatar
 
Join Date: Aug 2003
Location: East Haven, CT
Posts: 3,349
Re: Eaton Swap.....

Quote:
Originally Posted by nickster View Post
well if your mach has a 2 valve in it ,that is the setup for you
__________________
2011 Mustang GT Grabber Blue Automatic


2003 Mach 1 Whipple 2.3 718 rwhp 735 rwtq @25 psi SOLD
Scott McClure is offline   Reply With Quote
Old 02-20-2010, 07:26 PM   #330
vtecDIS
hunt'n for chevy's
 
vtecDIS's Avatar
 
Join Date: May 2006
Location: Southern CA
Posts: 660
Re: Eaton Swap.....

Quote:
Originally Posted by nickster View Post
well if your mach has a 2 valve in it ,that is the setup for you
uhh, duh, it does. doesnt yours?! anyway thanks, smartass lol


The Termi uses the same Romeo Iron Block as the block as the GT's. if those are the same, I thought Eaton with the 2v heads would be interchangeable too.
__________________
2003 Torched Mach1, IUP, 5spd
My Mach is for sale.. http://www.mach1registry.org/forums/...d.php?t=108311
2002 Trans Am WS6 M6. Sold but not forgotten
vtecDIS is offline   Reply With Quote
Old 03-02-2010, 09:51 PM   #331
xXAzureMach1Xx
04 Mach 1
 
xXAzureMach1Xx's Avatar
 
Join Date: Mar 2008
Location: Pensacola FL
Posts: 272
Re: Eaton Swap.....

Quote:
Originally Posted by vtecDIS View Post
uhh, duh, it does. doesnt yours?! anyway thanks, smartass lol


The Termi uses the same Romeo Iron Block as the block as the GT's. if those are the same, I thought Eaton with the 2v heads would be interchangeable too.
you talkin about the ford gt or gt mustang? anyways the 5.4 is wider then the 4.6. so no it would be the same. different intakes. pretty sure the blower would be out the hood.
xXAzureMach1Xx is offline   Reply With Quote
Old 03-10-2010, 12:25 PM   #332
DarkMach1
Registered User
 
DarkMach1's Avatar
 
Join Date: Aug 2008
Location: Miami,FL
Posts: 796
Re: Eaton Swap.....

So using the cobra gasket on the oil cooler adapter will result in a leak? Just making sure since the post where it mentions it is 3 years old.
__________________
2004 black 5spd mach1
Mods-Eaton swap w/ 3.65 pulley, full exhaust, built rear end and some suspension. SOLD

2007 Trailblazer SS- Current
DarkMach1 is offline   Reply With Quote
Old 03-10-2010, 01:36 PM   #333
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Hey could someone tell me the belt numbers for the belts so i can get them ordered. Im looking for gates # if possible, i went through the thread and did not find them posted.
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Old 03-14-2010, 07:07 PM   #334
snakebitx2
Registered User
 
snakebitx2's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 746
Re: Eaton Swap.....

Just trying to get a rough estimate on how much money i'll get back from my stock parts after I do the eaton swap and was wondering how much you guys got back?
__________________
Eaton Swapped, Pro-Motion built transmission, and 1.55 60' built rear end
snakebitx2 is offline   Reply With Quote
Old 03-14-2010, 07:20 PM   #335
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Any ideas on belt numbers...thx
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Old 03-15-2010, 07:39 PM   #336
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

if you go to billetflow they have some sort of belt sizing on there, or the company you are using for your pulleys could help you out
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-16-2010, 09:03 AM   #337
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Yea it only list the one belt thats my problem ha.
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Old 03-16-2010, 09:23 AM   #338
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

should have a bunch of different ones for different pulleys

are you using the stock eaton pulley set up or what pulley brand and size did you go with
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-16-2010, 12:08 PM   #339
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Eaton Swap.....

Quote:
Originally Posted by Mudd92 View Post
Yea it only list the one belt thats my problem ha.
Just go to autozone and buy a gatorback belt for a 2003 cobra. They should have it in stock there.
machgsxr is offline   Reply With Quote
Old 03-16-2010, 12:35 PM   #340
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

but wonded it make a different if he was getting a different pulley than stock.

i would say if you were using stock pulley then take the advice from above and just go to autozone or some parts store and pick up a stock cobra belt and you will be good.
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-16-2010, 12:40 PM   #341
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

here is the link
http://www.billetflow.com/supercharger_pulleys.htm


Belt Selection Guide
Note: We only carry a few belt sizes

(a good place to order belt online is www.rockauto.com )
Use the following 5% discount code at RockAuto: 647174351781


No Idlers

Pulley Size.....Belt Size.......Gates Part No......Gatorback Part No.
3.65 (stock).....75.1" .............K080751................4080750
3.40................75".................K080750... .............4080750
3.10................74.5...............K080745.... ............4080745

With Single Snub Idler and Bracket Kit

Pulley Size.....Belt Size.......Gates Part No......Gatorback Part No.
3.65...............75.5"...............K080755.... ............4080755 (can not use New Bracket)
3.40...............75.1"...............K080751.... ............4080750 (can not use New Bracket)
3.10...............74.5"...............K080745.... ............4080745 (must use 92mm Idler Pulley)
2.93...............74.5"..................K080745. ...............4080745 (with 100mm Idler)
2.76...............74.5"..................K080745. ...............4080745 (with 100mm Idler)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm)

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............77"...................K080772... ............4080772 (can not use New Bracket)
3.40..............76.5"................K080765.... ...........4080765 (can not use New Bracket)
3.10..............75.5"................K080755.... ...........4080755 (must use 92mm Idler Pulley)
2.93..............75.5"................K080755.... ...........4080755 (with 100mm Idler)
2.76..............75.1".................K080751... ............4080750 (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 2lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............78.0"................K080780.... ...........4080780 (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 4lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 6lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 8lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-16-2010, 01:04 PM   #342
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Eaton Swap.....

Quote:
Originally Posted by 460hpmach1 View Post
but wonded it make a different if he was getting a different pulley than stock.

i would say if you were using stock pulley then take the advice from above and just go to autozone or some parts store and pick up a stock cobra belt and you will be good.
He was asking about the second belt, which would be the inner belt since he found the chart that you just posted up with the belt lengths that are affected by the changing of the s/c pulleys and crank pulley. The inner belt is not affected by going to smaller pulleys.

THe only way to affect the inner belt length would be by deleteing the p/s or a/c.
machgsxr is offline   Reply With Quote
Old 03-16-2010, 01:26 PM   #343
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

Quote:
Originally Posted by machgsxr View Post
He was asking about the second belt, which would be the inner belt since he found the chart that you just posted up with the belt lengths that are affected by the changing of the s/c pulleys and crank pulley. The inner belt is not affected by going to smaller pulleys.

THe only way to affect the inner belt length would be by deleteing the p/s or a/c.
i'm sorry i thought he was talking bout the s/c belt. my bad. i was just tryin to help
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-16-2010, 02:09 PM   #344
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Thanks folks! Heres what I got from the parts catlog at work through Oreillys because I wanted gates.

K060960 - ACCESSORY
K80751 - SUPERCHARGER

Just if that helps anyone for the accesory belt. Since the S/C was posted above ^
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey

Last edited by Mudd92; 03-16-2010 at 02:24 PM.
Mudd92 is offline   Reply With Quote
Old 03-23-2010, 12:11 PM   #345
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

The cobra fuel rail is not required correct? I didnt see just wanted to be sure...thanks
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Old 03-23-2010, 12:25 PM   #346
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

i believe you need the cobra fuel rail for the eaton swap, it seems to be part of the eaton swap kit
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-23-2010, 01:02 PM   #347
machgsxr
Registered User
 
machgsxr's Avatar
 
Join Date: Feb 2005
Location: San Antonio
Posts: 6,414
Re: Eaton Swap.....

Quote:
Originally Posted by Mudd92 View Post
The cobra fuel rail is not required correct? I didnt see just wanted to be sure...thanks
Not on the list, not needed. THey are the same.
machgsxr is offline   Reply With Quote
Old 03-23-2010, 01:13 PM   #348
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Eaton Swap.....

for some reason i thought it was a upgrade you had to do. sorry for giving wrong info thanks for correcting me machgsxr
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 03-23-2010, 09:48 PM   #349
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Thanks, did a little reading and PM'd lookngo and not needed, LIKE the list said heh, thanks guys!

Only like 3-4 more parts away!!
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Old 03-25-2010, 11:16 AM   #350
Mudd92
03 Mach
 
Mudd92's Avatar
 
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
Re: Eaton Swap.....

Possibly off someones head, what power levels is the cobra fuel setup good for? (injectors, pumps, tank)
__________________
-03 AB Mach 5spd
Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon

-95 Chevy C1500 5.7 auto
Stock, tow rig and DD.

-Joey
Mudd92 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:27 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<