|
|
Power Adders Superchargers, Turbos, Nitrous, etc... |
|
Thread Tools | Display Modes |
04-06-2018, 12:56 PM | #1 |
Registered User
Join Date: Feb 2012
Location: Michgan
Posts: 13
|
ISO hellion turbo kit pan punch
Does anyone have the punch from their hellion kit for a few bucks??
Sent from my SM-G930T1 using Tapatalk |
04-06-2018, 08:41 PM | #2 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: ISO hellion turbo kit pan punch
I do not think I could trust that method; I would rather have a bung welded on, that is what I ended up doing when I did my kit. I have seen that method have oil leaks, not big, just minor drips here and there.
but, if you are looking for alternatives without dropping your pan, I know some guys that bought a large brass plumb bob at Home Depot or Lowes and used that instead. It worked for them. I'd still prefer to drop the pan and weld an AN fitting on it.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
04-09-2018, 08:51 AM | #3 | |
it's soo-tack
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
|
Re: ISO hellion turbo kit pan punch
Quote:
__________________
mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold) |
|
04-11-2018, 09:53 PM | #4 | |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: ISO hellion turbo kit pan punch
Quote:
either pull the pan or buy a new canton or whatever you like and get a bung welded onto it...
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|