2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > General Registry Discussion

General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums.

Reply
 
Thread Tools Display Modes
Old 05-20-2012, 10:44 AM   #1
falcongtho3
Moderating at Mach 1
 
falcongtho3's Avatar
 
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,263
Stickey Thread: Mach 1 history and information

As we're closing in on the 10 anniversary of our club and the beginning of the production of the '03/'04 Machs, I thought it might be a good idea to post up information about questions that arise on a regular basis as to original aspects of our cars.
I invite questions from any member, and answers from members here who can contribute solid information about the facts about our cars as it pertains to originality. There's nothing more frustrating to me than to see information about vintage Mustangs that is just plain wrong. I hope to stem that issue on our cars with this thread.
I don't pretend to know everything about everything, but I'll contribute what I can, when I can. there are others who have been here since the beginning, or are well versed in our cars as well who can also be of service and I invite them to chime in to add to the well of knowledge I am trying to build here. Thanks, John!

The first thing I wanted to address is the issue of original floor mats. This gets brought up often, and is something I can help answer with photos.
Our cars came with regular Mustang front floor mats when delivered. No Mach 1 specific mats were made by Ford and no rear mats came in the cars.

These are the original type of floor mat our cars came with. They were covered with a removable plastic covering that was generally removed at the dealership. These are a NOS set I purchased some years ago.


These are the original floor mats from my car and were used for about six years on a daily basis. As you can see they have some wear but are identical to the above mats with the exception of the plastic protective covering.


These are the very popular CDC mats that were offered not long after Mach 1 production began. They produced for a number of years and included a pair of rear plain mats as well.


__________________
Krewe de la Mach Rouge

#340804 13th Mach 1 built
11/07/02 Build Date
12/13/02 Delivery
falcongtho3 is offline   Reply With Quote
Old 11-11-2013, 06:59 AM   #2
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
I've got a set of those CDC mats. I had originally thought they were OEM's, until hanging around the M1R forum. I'm thinking about cleaning them up really good and just using them for show since they don't make them anymore. Mine have about the same wear as your pic ^above.
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 11-11-2013, 07:09 AM   #3
falcongtho3
Moderating at Mach 1
 
falcongtho3's Avatar
 
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,263
Re: Stickey Thread: Mach 1 history and information

They look great and are much nicer than the OEMs. Many people do believe them to be the originals, but they aren't. They should have been, though.

__________________
Krewe de la Mach Rouge

#340804 13th Mach 1 built
11/07/02 Build Date
12/13/02 Delivery
falcongtho3 is offline   Reply With Quote
Old 11-11-2013, 08:07 AM   #4
gfong
Greg Fonger
 
gfong's Avatar
 
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
Re: Stickey Thread: Mach 1 history and information

Here are a few things that come to mind.

Rear bumper lettering states, Mustang and painted the same as body colour, did not come with the vinyl lettering that some people use.

OEM Antenna was silver (never understood that, should have been black like rest of car theme)
gfong is offline   Reply With Quote
Old 11-11-2013, 09:04 PM   #5
falcongtho3
Moderating at Mach 1
 
falcongtho3's Avatar
 
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,263
Re: Stickey Thread: Mach 1 history and information

And NONE of them came with Cobra Jet on the shaker.
In fact, the shaker drain grommet was black when the cars were new, but the paint didn't stick well and generally came off at the first good washing.

__________________
Krewe de la Mach Rouge

#340804 13th Mach 1 built
11/07/02 Build Date
12/13/02 Delivery
falcongtho3 is offline   Reply With Quote
Old 11-11-2013, 09:28 PM   #6
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Quote:
Originally Posted by gfong View Post
Here are a few things that come to mind.

Rear bumper lettering states, Mustang and painted the same as body colour, did not come with the vinyl lettering that some people use.

OEM Antenna was silver (never understood that, should have been black like rest of car theme)
So that's why my antenna is peeling like crazy.
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 11-11-2013, 09:29 PM   #7
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Quote:
Originally Posted by falcongtho3 View Post
And NONE of them came with Cobra Jet on the shaker.
In fact, the shaker drain grommet was black when the cars were new, but the paint didn't stick well and generally came off at the first good washing.

That's too bad about the drain. Mine has a tint to it now like it's getting ready to rust.
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 11-11-2013, 09:33 PM   #8
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
I've heard the passenger side door sets just a tad low toward the front on the 03's. I kinda think it's all of them. My 04 does the same thing, but I didn't notice it until I read about it.
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 08-09-2015, 10:38 PM   #9
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Originally I thought my shaker drain fitting was steel. Apparently it's brass.




IG: @azurebluemach
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 02-20-2016, 10:59 PM   #10
03Shadow Grey
Registered User
 
03Shadow Grey's Avatar
 
Join Date: Feb 2016
Location: Theodore Alabama
Posts: 282
Re: Stickey Thread: Mach 1 history and information

When I purchased the car I was thinking the same thing , where are the mach 1 floor mats but mine look just like falcons along with the yellow anodized scoop drain grommet. I took off the scoop yesterday to change the serpentine belt and I think its missing something where the two 2.5 inch 10 mm screws go through to hold it on . If it didnt have anything there factory im going to have to fab something up , it squeaks . PS, moto NO squeaks NO Leaks !!
03Shadow Grey is offline   Reply With Quote
Old 02-20-2016, 11:35 PM   #11
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Stickey Thread: Mach 1 history and information

Quote:
Originally Posted by 03Shadow Grey View Post
When I purchased the car I was thinking the same thing , where are the mach 1 floor mats but mine look just like falcons along with the yellow anodized scoop drain grommet. I took off the scoop yesterday to change the serpentine belt and I think its missing something where the two 2.5 inch 10 mm screws go through to hold it on . If it didnt have anything there factory im going to have to fab something up , it squeaks . PS, moto NO squeaks NO Leaks !!
can you post a picture of the area your talking about, i'm curious
Thanks

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 02-21-2016, 08:06 AM   #12
falcongtho3
Moderating at Mach 1
 
falcongtho3's Avatar
 
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,263
Re: Stickey Thread: Mach 1 history and information

This link and photos posted by Dave may be of help...
http://www.mach1registry.com/shaker/

__________________
Krewe de la Mach Rouge

#340804 13th Mach 1 built
11/07/02 Build Date
12/13/02 Delivery
falcongtho3 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<