|
|
Road Course & Autocross Post info about SCCA and Road Course Racing. |
|
Thread Tools | Display Modes |
07-27-2014, 08:51 PM | #1 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Polish Mtn hillclimb Cumberland, MD
We're ready for the next hillclimb. August 2/3
If you're in the area, come out and check it out. Location is actually Flintstone MD.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
08-05-2014, 11:10 PM | #2 |
Registered User
Join Date: Oct 2004
Location: Middletown, PA
Posts: 3,991
|
Re: Polish Mtn hillclimb Cumberland, MD
So? How did you do?
__________________
Brian 04 Azure Mach 1 Mods: Enough to not be the slowest, but nowhere near enough to be the fastest. 17 Fusion Sport Now faster than the Mach 96 Laser Red Cobra Vert For those days you just wanna cruise with the top down 89 Shelby CSX Still rocking the VNT and Fiberides. |
08-06-2014, 05:10 AM | #3 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Polish Mtn hillclimb Cumberland, MD
I did so so. Ran 2 seconds faster than I did in 2011 but 1.5sec short of the record. Not being completely familiar with this course hurt my driving.
It was a complicated weekend. Quite a few wrecks, spins and off courses. I had an off out of turn 4 and a full spin coming into the last turn just before lunch on Sunday. And no, I didn't in-car because I left the camera at home!! A guy on turn 5 got my spin but the vid is very low quality unfortunately. In the end, I came in 8th overall. Here's the unofficial results: http://pahillclimb.org/live-results/ Scroll down to Street Mod. Next to my name on the right is the placement at the end of the event. I suspect the official results will be out today. I'm waiting to see if i still retain highest speed in the 'straight'. Saturday I was #1 @ 107mph and on my last run I spun, I had 109mph. It was bugging me all day on Saturday, why I was braking so early into 3 and 5. And it finally dawned on me that I hadn't run there since 2011. Combine that with the fact that I was trying NOT to wreck the car before Duryea and I just didn't have it. But I've started prep for Duryea!!!! I cannot wait. New 315 A6s coming, new brakes, new bushings/bearings for UCAs, new air filter, new plugs, more timing in the tune, new front springs and 'attempt' to do some weight reduction somewhere, all race fuel. If I have time, build a new wing. Oh, we left early on Sunday due to my buddy winding up on his roof in his miata. Cars a total loss except for the trunk and the motor still starts. We took him home since he drove the car there. Come to Duryea! I been looking forward to this race for 2 years. The car is just about ready and I'm so excited it isn't funny. If you want to see a car that WORKS on the street, come watch. Aug 16/17 We have a car show as well with entry at $20. It includes a drive up the hill at lunch, behind a pace car. Car show is not judged and no prizes awarded. So cross your fingers for NO RAIN! I need 2 days of clear skys and moderate temps.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
08-06-2014, 08:27 AM | #4 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Polish Mtn hillclimb Cumberland, MD
So cross your fingers for NO RAIN! I need 2 days of clear skys and moderate temps.
DONE !!
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
08-06-2014, 09:12 AM | #5 |
Hillclimb Extraodinaire
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
|
Re: Polish Mtn hillclimb Cumberland, MD
Thank you. Much appreciated.
__________________
RIP - Destroyed August 15, 2015 Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country Mustang dyno: 538hp/481tq @ 14lbs/19deg timing DynoJet comparison: 600hp/539tq Looking for more hillclimbers! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|