|
10-09-2007, 11:55 AM | #1 |
Guest
Join Date: Oct 2007
Location: SW FL
Posts: 5
|
Nitrous Install help
hi im new sorry for no intro but i need some help quick
im putting a nitrous kit + msd window switch on a 2004 mach1. I need to know what wires to tap to get the rpm for the window switch. also what wire can i tap under the dash to get the 12volt key'd ignition. and also whats the best way to run wires through the fire wall. Thank you very much. |
10-09-2007, 01:11 PM | #2 |
Registered User
Join Date: May 2005
Location: Woodstock,GA
Posts: 544
|
Re: Nitrous Install help
Go to raptorperformance.com and follow their instruction in what and where to tap into:
http://www.mustanghowto.com/interior...ft%20Light.htm |
10-09-2007, 01:29 PM | #3 |
Loud, fast and fun
Join Date: Apr 2004
Location: Owning Ricers at MIR
Posts: 7,864
|
Re: Nitrous Install help
Gotta go through the panel on the passenger side, it's the green wire with the white stripe and it's all the way in a corner. Use that for the RPM's. I forgot already which wire I used for the ignition...
|
10-09-2007, 01:43 PM | #4 |
Guest
Join Date: Oct 2007
Location: SW FL
Posts: 5
|
Re: Nitrous Install help
that green and white wire also runs down on the driver side of the intake manifold in the big wire loom as well right. i looks like the dyno guys pulled it out of the loom to get @ it.
|
10-09-2007, 01:50 PM | #5 |
Loud, fast and fun
Join Date: Apr 2004
Location: Owning Ricers at MIR
Posts: 7,864
|
Re: Nitrous Install help
I believe so yes.. I guess it depends on where you're putting your WS as to where you'd want to splice into it.
|
10-09-2007, 02:05 PM | #6 |
Guest
Join Date: Oct 2007
Location: SW FL
Posts: 5
|
Re: Nitrous Install help
gotcha. i will post pictures of the install later 2night.
|
10-09-2007, 07:33 PM | #7 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Nitrous Install help
If you have time, look here. Should have everything you need.
http://www.mach1registry.org/forums/...hlight=nitrous
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
10-09-2007, 11:53 PM | #8 |
Guest
Join Date: Oct 2007
Location: SW FL
Posts: 5
|
Re: Nitrous Install help
this is how i wired it. could oyu please check it over and make sure its correct.
thanks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|