bbford97's ported intake - 2003-04 Mach 1 Registry Owners Club

Roy · 07-20-2010, 09:23 PM

Here's some random pic's of Garys intake I ported.

Roy · 07-20-2010, 09:24 PM

More.

Roy · 07-20-2010, 09:28 PM

Gary's been a great guy to do work for. He has bared thru a couple medical issues (self inflicted

) with me that put his intake on the back burner for a couple weeks. He is also a nice guy to talk to on the phone.
I'm also finishing up an epoxied short runner, I'll get some pic's of it next.

littlemags · 07-20-2010, 09:44 PM

Quote:

Originally Posted by Roy

Gary's been a great guy to do work for. He has bared thru a couple medical issues (self inflicted

) with me that put his intake on the back burner for a couple weeks. He is also a nice guy to talk to on the phone.
I'm also finishing up an epoxied short runner, I'll get some pic's of it next.

cant wait for those pics!

Roy · 07-20-2010, 09:48 PM

Quote:

Originally Posted by littlemags

cant wait for those pics!

I'll be back on it tomorrow.

Roy · 07-20-2010, 10:03 PM

Quote:

Originally Posted by littlemags

cant wait for those pics!

Here's a few. More epoxy came in today. This epoxy is the ugliest stuff. I told you your intake was full of baby ***** from a sick baby.

Mach916 · 07-21-2010, 03:09 AM

haha id like you see you make poo puddin into a psri.. roy your

but in a good way..

littlemags · 07-21-2010, 07:22 AM

^^ your right Roy...baby poo....hahaha.
Will be worth the wait though...next year shooting for fast times!

Roy · 07-21-2010, 08:17 AM

Quote:

Originally Posted by Mach1Marauder

Don't let him fool ya! That's Roy's poop!

Good work on the porting!!!!

I wish my poop was over $200 a gallon like this stuff.

20mach104 · 07-21-2010, 09:29 AM

If you don't mind me asking what exactly is the epoxy used for? Is it what has been referred to as a ported short runner intake?

SparksMach1 · 07-21-2010, 10:22 AM

at 200 bucks a gallon, i'd rather weld a piece of aluminum on the bottom of the intake!

Roy · 07-21-2010, 10:41 AM

Quote:

Originally Posted by SparksMach1

at 200 bucks a gallon, i'd rather weld a piece of aluminum on the bottom of the intake!

Its not just for a bottom. New runners will be made in the epoxy. They will be straight 5 1/2" runners with a nice entry.

SparksMach1 · 07-21-2010, 10:44 AM

Quote:

Originally Posted by Roy

Its not just for a bottom. New runners will be made in the epoxy. They will be straight 5 1/2" runners with a nice entry.

You can shape epoxy well enough to make runners out of it? this is exactly why i'm having you make my short runner (eventually)!

R-code17815 · 07-21-2010, 12:23 PM

Lonestar7 · 07-21-2010, 01:26 PM

Mines welded!

LS

littlemags · 07-21-2010, 02:01 PM

should work well with my combo too...cant wait till next season.

bbford97 · 07-21-2010, 03:46 PM

It’s going to be fun. The pistons will be in next week, I hope!! I'll send you the results, hope to have everything by mid Aug

jonw357 · 07-21-2010, 04:50 PM

Intake looks familiar. lol....

Roy · 07-21-2010, 04:52 PM

Quote:

Originally Posted by bbford97

It’s going to be fun. The pistons will be in next week, I hope!! I'll send you the results, hope to have everything by mid Aug

Sweet! The intake is on its way.

Brown7 · 07-21-2010, 06:48 PM

dam would be nice if i could do this at home. Good job looks great

na svt · 07-21-2010, 10:30 PM

Looks like Z spar, that stuff's fun to mix up isn't it? Just put 1/2 gallon of it it in four intakes, feels like I just worked out.

Roy · 07-21-2010, 11:27 PM

Quote:

Originally Posted by na svt

Looks like Z spar, that stuff's fun to mix up isn't it? Just put 1/2 gallon of it it in four intakes, feels like I just worked out.

You did 4 intakes with a half gallon? What is it you find so hard about mixxing it? My wife did this one.

na svt · 07-22-2010, 07:12 AM

Quote:

Originally Posted by Roy

You did 4 intakes with a half gallon? What is it you find so hard about mixxing it? My wife did this one.

I'm not using it quite the same way as you. The intakes wiwth 5.5" runners have a lot of welding done on them along with the epoxy and the 9" runner intakes only get it in the area between the runner inlets.

bbford97 · 07-22-2010, 11:57 AM

Make sure she stays away from the Grindnosaurus those things can really slash a person
cheers

Roy · 07-22-2010, 04:25 PM

Quote:

Originally Posted by bbford97

Make sure she stays away from the Grindnosaurus those things can really slash a person
cheers

You mean like this?

07-20-2010, 09:23 PM	#1
Roy Registered User Join Date: Jul 2005 Location: S.E. Mich. Posts: 3,446	bbford97's ported intake Here's some random pic's of Garys intake I ported. Attached Thumbnails

07-20-2010, 09:24 PM	#2
Roy Registered User Join Date: Jul 2005 Location: S.E. Mich. Posts: 3,446	Re: bbford97's ported intake More. Attached Thumbnails

07-20-2010, 09:28 PM	#3
Roy Registered User Join Date: Jul 2005 Location: S.E. Mich. Posts: 3,446	Re: bbford97's ported intake Gary's been a great guy to do work for. He has bared thru a couple medical issues (self inflicted ) with me that put his intake on the back burner for a couple weeks. He is also a nice guy to talk to on the phone. I'm also finishing up an epoxied short runner, I'll get some pic's of it next.

07-21-2010, 03:09 AM	#7
Mach916 Registered User Join Date: Feb 2008 Location: Sacramento, Ca Posts: 1,044	Re: bbford97's ported intake haha id like you see you make poo puddin into a psri.. roy your but in a good way.. __________________ 2003 Mach 1 5spd Black with IUP Engine Mods: cone filter, Crower stage 2 cams, Hooker long tubes, SLP Powerflo exhaust Rear end: Cobra diff, moser axles, 3.73 gears, Ford Racing aluminum driveshaft Suspension: Eibach Pro kit with poly isolators And some other small things... 348.6/331.6 sae

07-21-2010, 07:22 AM	#8
littlemags finally paid for Join Date: Nov 2004 Location: Ypsilanti Twp, Mi Posts: 4,077	Re: bbford97's ported intake ^^ your right Roy...baby poo....hahaha. Will be worth the wait though...next year shooting for fast times! __________________ 2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress...

07-21-2010, 09:29 AM	#10
20mach104 Registered User Join Date: Apr 2010 Location: VA Posts: 378	Re: bbford97's ported intake If you don't mind me asking what exactly is the epoxy used for? Is it what has been referred to as a ported short runner intake? __________________ 2004 Oxford White Mach 1 - Gone and slightly missed Replaced with: 2003 Redfire Cobra - 2.8 Upper, 100mm Idler, Prochamber, 3" Catback, SBTB, F/R Strut Brace, FLSFC, IRS Brace, Afco Double Pass Heat Exchanger, MGW Shifter - Blue handle, LFP Big Mouth SBTB and power inlet, Hard launch cross bar and Alum. Adj Hard Launch Bushing kit 6,018 of 8,394

07-21-2010, 10:22 AM	#11
SparksMach1 Shitin 'n Gitin Join Date: Mar 2007 Location: Pasadena, MD Posts: 1,416	Re: bbford97's ported intake at 200 bucks a gallon, i'd rather weld a piece of aluminum on the bottom of the intake! __________________ 2003 AB Mach -- 442/435 @ the rear ALL MOTOR -Race Gas FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's.

07-21-2010, 12:23 PM	#14
R-code17815 The MODfather #7046 Join Date: Mar 2006 Location: Bloomsburg, PA Posts: 1,360	Re: bbford97's ported intake __________________ R-code17815 2003 Mach1 6-spd. Black Black Sunshine... The never ending "Work in Progress" RTCTTFMF

07-21-2010, 01:26 PM	#15
Lonestar7 Guest Join Date: Apr 2007 Location: Denver, CO Posts: 3,152	Re: bbford97's ported intake Mines welded! LS

07-21-2010, 02:01 PM	#16
littlemags finally paid for Join Date: Nov 2004 Location: Ypsilanti Twp, Mi Posts: 4,077	Re: bbford97's ported intake should work well with my combo too...cant wait till next season. __________________ 2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress...

07-21-2010, 03:46 PM	#17
bbford97 Registered User Join Date: Mar 2007 Location: Ocala, Fl Posts: 230	Re: bbford97's ported intake It’s going to be fun. The pistons will be in next week, I hope!! I'll send you the results, hope to have everything by mid Aug __________________ Auto, Kooks LT, O/R X, Borla cat back, JLT warm air, Rich's infamous air diverter with 164302 miles. Has seen rain wind and fire. boss 330 motor blew up less than 300 miles junk! Now have a MMR 5.0built April 2011 now have 65K milles turned 12.44@ 110 July 2013 , 12.66@111.10 April 2014 Thanks Mark.

07-21-2010, 04:50 PM	#18
jonw357 Registered User Join Date: May 2005 Location: Decatur, AL Posts: 142	Re: bbford97's ported intake Intake looks familiar. lol.... __________________ Past Mustangs 1969 coupe, 1987 Gt, 1990 Silver lx built 357w, 1999 Silver GT, 1993 lx-150 shot, 1986 silver 347 Gt, 1989 Gt conv, 1993 black tw headed b-trim cobra 2003 Black Mach 1 MODS Stage 4 Ported Blower Ported Elbow, Throttle Body JLT intake Amazon Tune Diablo Tuner 4:10 gears Spec Alum FW LM Centerforce Clutch Pro 5.0 Shifter 2.8 upper, 4lb lp Magnaflow Cat-back Bassani off-rd Xpipe FMS C Springs Strange SS axles UPR Pro series control arms 26spl 6 speed KB BAP

07-21-2010, 06:48 PM	#20
Brown7 Registered User Join Date: Nov 2008 Location: Abilene, Texas Posts: 778	Re: bbford97's ported intake dam would be nice if i could do this at home. Good job looks great __________________ 03' DSG Mach 1 - Sold 85' Silver Metalic SVO

07-21-2010, 10:30 PM	#21
na svt Registered User Join Date: Dec 2007 Location: beavercreek, oh Posts: 4,695	Re: bbford97's ported intake Looks like Z spar, that stuff's fun to mix up isn't it? Just put 1/2 gallon of it it in four intakes, feels like I just worked out.

07-22-2010, 11:57 AM	#24
bbford97 Registered User Join Date: Mar 2007 Location: Ocala, Fl Posts: 230	Re: bbford97's ported intake Make sure she stays away from the Grindnosaurus those things can really slash a person cheers __________________ Auto, Kooks LT, O/R X, Borla cat back, JLT warm air, Rich's infamous air diverter with 164302 miles. Has seen rain wind and fire. boss 330 motor blew up less than 300 miles junk! Now have a MMR 5.0built April 2011 now have 65K milles turned 12.44@ 110 July 2013 , 12.66@111.10 April 2014 Thanks Mark.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)