Insert Your Exhaust Sound Clips Here - Page 9 - 2003-04 Mach 1 Registry Owners Club

weaver · 03-12-2008, 07:46 PM

Stock headers
MAC catted h-pipe
Flowmaster Super 44's welded in
4" tips

Not as loud as the X-pipe I had but I like it

HamMach1 · 03-14-2008, 02:10 PM

Quote:

Originally Posted by weaver

Stock headers
MAC catted h-pipe
Flowmaster Super 44's welded in
4" tips

Not as loud as the X-pipe I had but I like it

Sounds wicked dude! But too honest... I can't really tell the difference except the sound up top.

Was your x-pipe catted or not?

weaver · 03-14-2008, 02:15 PM

Quote:

Originally Posted by HamMach1

Sounds wicked dude! But too honest... I can't really tell the difference except the sound up top.

Was your x-pipe catted or not?

Catted. It's much quieter inside too and no, it doesn't scream up top like the X but I love the tone much better.

How about that idle

BTW, it was spinnin' until I let off. Torque is WAY better with this pipe.

HamMach1 · 03-14-2008, 02:33 PM

Well from the clip it sounds almost the same LOL. If I heard you car with both pipes side to side... I could probably tell the difference.

I gotta get my o/r x-pipe on. Hopefully soon! At least it came in finally lmao.

weaver · 03-14-2008, 03:21 PM

Quote:

Originally Posted by HamMach1

Well from the clip it sounds almost the same LOL. If I heard you car with both pipes side to side... I could probably tell the difference.

I gotta get my o/r x-pipe on. Hopefully soon! At least it came in finally lmao.

Yeah in the clips it doesn't sound much different. Probably because of the cheap digi camera I'm using.

I actually kind of torn between the two. I wish it were louder. Maybe I'll have to try an o/r H like I had originally planned or cut the cats out of the x-pipe and try that.

Man I sure hope you haven't rubbed off on me with this whole exhaust crap

HamMach1 · 03-14-2008, 03:34 PM

Quote:

Originally Posted by weaver

Yeah in the clips it doesn't sound much different. Probably because of the cheap digi camera I'm using.

I actually kind of torn between the two. I wish it were louder. Maybe I'll have to try an o/r H like I had originally planned or cut the cats out of the x-pipe and try that.

Man I sure hope you haven't rubbed off on me with this whole exhaust crap

Me rubbing off on someone here? NO ******* WAY! Welcome to my world

I bet an o/r x-pipe with those Flows would sound dope.

weaver · 03-14-2008, 03:41 PM

Quote:

Originally Posted by HamMach1

Me rubbing off on someone here? NO ******* WAY! Welcome to my world

I bet an o/r x-pipe with those Flows would sound dope.

I'll give this H a little time and see how it goes. Maybe I need different mufflers

gvervoren · 03-15-2008, 08:50 AM

My stock exhaust.

Here is the link.

http://www.youtube.com/watch?v=uTbTAWjon0g

I can't get the video to show up? I get this instead.

<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/uTbTAWjon0g&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/uTbTAWjon0g&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

HamMach1 · 03-15-2008, 01:38 PM

Quote:

Originally Posted by weaver

I'll give this H a little time and see how it goes. Maybe I need different mufflers

I think those 44's sound great man and so do both midpipes. I prefer the x-pipe because of the wider range of sound it gets, especially up top, and that's really the only place the h-pipe lacks.

I bet a Prochamber would sound insane with those 44's

HamMach1 · 03-15-2008, 05:54 PM

Here's a boring clip...

Magnapack catback
VRS o/r x-pipe

http://videos.streetfire.net/video/7...6101787f70.htm

weaver · 03-15-2008, 06:50 PM

Quote:

Originally Posted by HamMach1

Here's a boring clip...

Magnapack catback
VRS o/r x-pipe

http://videos.streetfire.net/video/2...ipe_154156.htm

Sounds WAY better! Do a drive by or take off clip if you can.

HamMach1 · 03-15-2008, 07:29 PM

I will once I can get my buddy to film for me!

mach1 03 · 03-15-2008, 09:38 PM

Quote:

Originally Posted by HamMach1

Here's a boring clip...

Magnapack catback
VRS o/r x-pipe

http://videos.streetfire.net/video/2...ipe_154156.htm

sounds good I agree that you need a drive by or a take off video.

HamMach1 · 03-16-2008, 01:08 AM

New clip!

Made a nice little video!

http://videos.streetfire.net/video/2...ter_154332.htm

jason012 · 03-16-2008, 08:39 AM

Quote:

Originally Posted by weaver

Stock headers
MAC catted h-pipe
Flowmaster Super 44's welded in
4" tips

Not as loud as the X-pipe I had but I like it

hey, I know where that vid was made!!

weaver · 03-19-2008, 09:33 PM

Quote:

Originally Posted by jason012

hey, I know where that vid was made!!

Check your PM

5OhNA4.6 · 03-20-2008, 04:14 AM

Manifolds: Mac Long Tubes
Midpipe: Off road Pro-Chamber
Catback: SLP LM1 resonators

Vid of Idle w/ cams

http://www.youtube.com/watch?v=8osQXxf18gk

weaver · 03-20-2008, 10:28 AM

Quote:

Originally Posted by 5OhNA4.6

Manifolds: Mac Long Tubes
Midpipe: Off road Pro-Chamber
Catback: SLP LM1 resonators

Vid of Idle w/ cams

http://www.youtube.com/watch?v=8osQXxf18gk

No revs or drive by? Would love to hear it

5OhNA4.6 · 03-20-2008, 05:36 PM

I'll go out and make some tonight!

weaver · 03-24-2008, 10:17 AM

Stock headers
Pypes o/r x-pipe
Flows Super 44's
4" tips

http://videos.streetfire.net/video/0...44s_155104.htm

HamMach1 · 03-24-2008, 11:30 AM

Quote:

Originally Posted by weaver

Stock headers
Pypes o/r x-pipe
Flows Super 44's
4" tips

http://videos.streetfire.net/video/0...44s_155104.htm

I DEFINTELY like the x-pipe more and man without the cats it REALLY gives it that raw edge, unlike the catted x-pipe where it stayed too smooth.

Sounds so sick man. Thanks for pissing me off. Looks like 44's are in my future

weaver · 03-24-2008, 11:45 AM

Quote:

Originally Posted by HamMach1

I DEFINTELY like the x-pipe more and man without the cats it REALLY gives it that raw edge, unlike the catted x-pipe where it stayed too smooth.

Sounds so sick man. Thanks for pissing me off. Looks like 44's are in my future

I think I'm finally settled for now. You should hear this in person. The vid doesn't even begin to do it justice.

I was cruising the other day and there was a group of smartass kids crossing the street acting like they were hitchhiking or something. When I rolled by I threw it in neutral and hit the gas. Those fuggers jumped outta there shoes! It was funny because on of the guys was throwing his hands in the air and was so mad. I laughed my *** off!!!

HamMach1 · 03-24-2008, 11:46 AM

Haha nice

How's the interior noise level with that setup?

cobramach1 · 03-24-2008, 12:34 PM

Weaver, I liked both the H and the X pipe. How does each of these sound in the car with the super 44's? Anyone near me in Michigan with a similar setup that I might listen to it first hand?

weaver · 03-24-2008, 01:39 PM

Quote:

Originally Posted by cobramach1

Weaver, I liked both the H and the X pipe. How does each of these sound in the car with the super 44's? Anyone near me in Michigan with a similar setup that I might listen to it first hand?

The x-pipe without cats is LOUD(it scares people!) but interior resonance is better than with cats. The x-pipe with cats had the most resonance and was still louder than the catted h-pipe.

The h-pipe w/cats was great for someone who wanted a nice sound without the resonance and not too loud. The torque was better down low with the h-pipe but it didn't seem to flow that great on the top end. This was the best set-up for interior noise.

Hope this helps

03-12-2008, 07:46 PM	#201
weaver mustangs rule Join Date: Jan 2007 Location: Charlotte, NC Posts: 1,123	Re: Insert Your Exhaust Sound Clips Here Stock headers MAC catted h-pipe Flowmaster Super 44's welded in 4" tips Not as loud as the X-pipe I had but I like it

03-14-2008, 02:33 PM	#204
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: Insert Your Exhaust Sound Clips Here Well from the clip it sounds almost the same LOL. If I heard you car with both pipes side to side... I could probably tell the difference. I gotta get my o/r x-pipe on. Hopefully soon! At least it came in finally lmao.

03-15-2008, 08:50 AM	#208
gvervoren Garry Vervoren Join Date: Mar 2006 Location: Green Bay Wisconsin Posts: 2,878	Re: Insert Your Exhaust Sound Clips Here My stock exhaust. Here is the link. http://www.youtube.com/watch?v=uTbTAWjon0g I can't get the video to show up? I get this instead. <object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/uTbTAWjon0g&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/uTbTAWjon0g&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object> __________________ >>>Garry Vervoren<<< 2004 Dark Shadow Grey ORIGINAL OWNER!!!! *I USED TO THINK BEING LAZY WAS BAD FOR ME SO I GAVE UP THINKING.* *HOOFBEATS ARE LOUDER THAN HEARTBEATS* 5 Speed, IUP, Tinted windows, 3rd brake light decal, Sequential Tail Lights, Smoked Tail Lights, Black Stainless Steel Bumper Inserts, Anthracite 18" staggard FR500 Build Date 10/08/2003 #567 of a build of 7182

03-15-2008, 05:54 PM	#210
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: Insert Your Exhaust Sound Clips Here Here's a boring clip... Magnapack catback VRS o/r x-pipe http://videos.streetfire.net/video/7...6101787f70.htm Last edited by HamMach1; 03-26-2008 at 01:09 PM.

03-15-2008, 07:29 PM	#212
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: Insert Your Exhaust Sound Clips Here I will once I can get my buddy to film for me!

03-16-2008, 01:08 AM	#214
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: Insert Your Exhaust Sound Clips Here New clip! Made a nice little video! http://videos.streetfire.net/video/2...ter_154332.htm Last edited by HamMach1; 03-16-2008 at 10:58 PM.

03-20-2008, 04:14 AM	#217
5OhNA4.6 Registered User Join Date: Jun 2004 Location: OKC, OK Posts: 463	Re: Insert Your Exhaust Sound Clips Here Manifolds: Mac Long Tubes Midpipe: Off road Pro-Chamber Catback: SLP LM1 resonators Vid of Idle w/ cams http://www.youtube.com/watch?v=8osQXxf18gk __________________ Brooke, 04 Oxford White, Comp Cams 270BH-114 (106400), SCT chip by SWTuning.com, built FRPP 31 spline rear w/ 4.56's, full exhaust, lots of other various bolt-ons. Numerous visual mods. Before cams/gears: 13.006 @ 107.02 (Street tires); 12.54 @ 105.85 (ET Drags). 329RWHP 307RWTQ, Mustang Dyno 3-18-08. DD: White 04 Ranger Edge

03-20-2008, 05:36 PM	#219
5OhNA4.6 Registered User Join Date: Jun 2004 Location: OKC, OK Posts: 463	Re: Insert Your Exhaust Sound Clips Here I'll go out and make some tonight! __________________ Brooke, 04 Oxford White, Comp Cams 270BH-114 (106400), SCT chip by SWTuning.com, built FRPP 31 spline rear w/ 4.56's, full exhaust, lots of other various bolt-ons. Numerous visual mods. Before cams/gears: 13.006 @ 107.02 (Street tires); 12.54 @ 105.85 (ET Drags). 329RWHP 307RWTQ, Mustang Dyno 3-18-08. DD: White 04 Ranger Edge

03-24-2008, 10:17 AM	#220
weaver mustangs rule Join Date: Jan 2007 Location: Charlotte, NC Posts: 1,123	Re: Insert Your Exhaust Sound Clips Here Stock headers Pypes o/r x-pipe Flows Super 44's 4" tips http://videos.streetfire.net/video/0...44s_155104.htm

03-24-2008, 11:46 AM	#223
HamMach1 A.D.D. FTL Join Date: Oct 2006 Location: Jacksonville, FL Posts: 3,017	Re: Insert Your Exhaust Sound Clips Here Haha nice How's the interior noise level with that setup?

03-24-2008, 12:34 PM	#224
cobramach1 Fear begins with 'FE' Join Date: Jun 2007 Location: Orion Twp, MI Posts: 1,930	Re: Insert Your Exhaust Sound Clips Here Weaver, I liked both the H and the X pipe. How does each of these sound in the car with the super 44's? Anyone near me in Michigan with a similar setup that I might listen to it first hand? __________________ '08 Shelby GT500 Black w/Alloy stripes '02 F250 Super Duty, 7.3L Power Stroke, 4x4, Extended Cab, Long Bed '70 Mach 1 Yellow/Black interior, 427 Medium Riser FE, Manual C6 '70 Mach 1 White/Vermillion interior, 351C 2v, Auto, A/C, needs restoration '70 Mach 1 Calypso Coral/Black interior, 351C 4v, Auto, very rusty parts car '69 Mach 1 Indian Fire Red/Black interior, R code 428CJ, 4spd, needs restoration

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)