|
||
|
|
||
|
|
07-25-2016, 02:00 PM
|
#1 |
|
not for long
 
Join Date: Aug 2008
Location: santa rosa beach fl
Posts: 830
|
I'm Baaack!
Been a while, like almost two years! If anyone remembers I went 10.22/132 on motor. Built it back in 09 with a boss5.0 iron block by mv and heads by starnes. Ran solid 10.7s with factory ecu, factory throttle body and 39lb injectors then I swapped to BS3 and larger injectors, spun it a bit and voila! 10.22. Anyway I spun a bearing and the kellog crank is out of production which threw a tailspin on the rest of the rotating assembly. So my ace in the hole (MV) found a crank and the short block should be done before too long. Hopefully I can have everything back together this fall and get some track time again and see if we can get some 9s on motor!
 https://www.youtube.com/results?search_query=1meenmach
__________________
BB/S 324 kooks sully accufab cams heads valves bs3 ls1coils sully rails aeromotive regulator Weldon pump 8gal cell batt in trunk tko500(faceplated) spool upr k foxbody spindles metco upper an lowers 502rwhp. |
|
|
|
07-25-2016, 02:34 PM
|
#2 |
|
700 HP Mach
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: I'm Baaack!
welcome back!
I almost lost a crank to an oiling issue, was very grateful they could save it. Parts are getting hard to come by...
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
|
|
|
|
07-25-2016, 03:51 PM
|
#3 |
|
Registered User
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
|
Re: I'm Baaack!
Nice!! Thing ripped!!
__________________
2004 Torch Red Procharged Mach 1 |
|
|
|
|
07-25-2016, 07:34 PM
|
#4 |
|
it's soo-tack
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
|
Re: I'm Baaack!
Awesome runs!
__________________
mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold) |
|
|
|
|
07-25-2016, 08:25 PM
|
#5 |
|
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: I'm Baaack!
Welcome back
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
|
|
|
|
07-25-2016, 10:42 PM
|
#6 | |
|
not for long
Join Date: Aug 2008
Location: santa rosa beach fl
Posts: 830
|
Re: I'm Baaack!
Quote:
__________________
BB/S 324 kooks sully accufab cams heads valves bs3 ls1coils sully rails aeromotive regulator Weldon pump 8gal cell batt in trunk tko500(faceplated) spool upr k foxbody spindles metco upper an lowers 502rwhp. |
|
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
<
Hybrid Mode
