Used BBK Ceramic Coated Long Tube Port Matched Headers - 2003-04 Mach 1 Registry Owners Club

Phil · 09-09-2008, 01:47 PM

I just removed my BBK long tube ceramic coated headers. I will be selling them for $275 shipped after I find a box... Unless it is a local pick-up I will knock $25 off. I also have (2) long tube O2 sensor extension harnesses with my O2 sensors that are in good condition. The BBK headers are in good condition, with minor rust, scratches after 3 years. I will post pics after my damm camera battery charges.

No damage to bottom of primaries going into collectors. These are a ball & socket design, meaning numerous aftermarket mid-pipes will fit these.

I port matched these BBK headers to the factory exhaust gasket, which matches our cylinder head exhaust ports. I made good HP & top end MPH with my factory long block.. http://www.mach1registry.org/forums/...ad.php?t=33586
__________________
Phil

Phil · 09-09-2008, 05:23 PM

Used Header Pics. The drivers side header has a factory made dent as you can see, in the primary tube to clear the factory steering shaft. The O2 sensors and the 2 extended harness come with the headers.

03MACH1SPEED · 09-10-2008, 06:15 PM

Bump for great posting Phil

Phil · 09-14-2008, 10:20 AM

Thanks!!!

A sale is pending..

Just a couple of notes:

1. No mounting/bolting hardware is included..
2. The EGR block off cap in pic does not come with the driver side header.
3. No gaskets

c0nfl1kt · 09-14-2008, 11:03 AM

for great justice!

slammed · 09-18-2008, 11:59 AM

This is soo tempting, especially since you are so close to me.

Phil · 09-18-2008, 06:43 PM

Headers are SOLD..

09-09-2008, 01:47 PM	#1
Phil Nitrous Junkie Join Date: Jul 2003 Location: Ohio Posts: 7,299	Used BBK Ceramic Coated Long Tube Port Matched Headers I just removed my BBK long tube ceramic coated headers. I will be selling them for $275 shipped after I find a box... Unless it is a local pick-up I will knock $25 off. I also have (2) long tube O2 sensor extension harnesses with my O2 sensors that are in good condition. The BBK headers are in good condition, with minor rust, scratches after 3 years. I will post pics after my damm camera battery charges. No damage to bottom of primaries going into collectors. These are a ball & socket design, meaning numerous aftermarket mid-pipes will fit these. I port matched these BBK headers to the factory exhaust gasket, which matches our cylinder head exhaust ports. I made good HP & top end MPH with my factory long block.. http://www.mach1registry.org/forums/...ad.php?t=33586 __________________ Phil __________________ Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 09-09-2008 at 06:52 PM.

09-09-2008, 05:23 PM	#2
Phil Nitrous Junkie Join Date: Jul 2003 Location: Ohio Posts: 7,299	Re: Used BBK Ceramic Coated Long Tube Port Matched Headers Used Header Pics. The drivers side header has a factory made dent as you can see, in the primary tube to clear the factory steering shaft. The O2 sensors and the 2 extended harness come with the headers. Attached Thumbnails __________________ Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/

09-10-2008, 06:15 PM	#3
03MACH1SPEED Registered User Join Date: Nov 2007 Location: dallas,tx Posts: 846	Re: Used BBK Ceramic Coated Long Tube Port Matched Headers Bump for great posting Phil __________________ 685 hp 744 tq never dyno'd, just a guess,

09-14-2008, 10:20 AM	#4
Phil Nitrous Junkie Join Date: Jul 2003 Location: Ohio Posts: 7,299	Re: Used BBK Ceramic Coated Long Tube Port Matched Headers Thanks!!! A sale is pending.. Just a couple of notes: 1. No mounting/bolting hardware is included.. 2. The EGR block off cap in pic does not come with the driver side header. 3. No gaskets __________________ Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/

09-18-2008, 11:59 AM	#6
slammed When did you get here? Join Date: Jul 2005 Location: Columbus Ohio Posts: 167	Re: Used BBK Ceramic Coated Long Tube Port Matched Headers This is soo tempting, especially since you are so close to me. __________________ 2004 Competition Orange IUP, 5 speed Born on 04/01/2004 Adopted 07/08/2005 .

09-18-2008, 06:43 PM	#7
Phil Nitrous Junkie Join Date: Jul 2003 Location: Ohio Posts: 7,299	Re: Used BBK Ceramic Coated Long Tube Port Matched Headers Headers are SOLD.. __________________ Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)