2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Tuning & Dyno Testing/Results

Tuning & Dyno Testing/Results Questions, experiences & results for electronic tuning and dyno tests

Reply
 
Thread Tools Display Modes
Old 06-08-2017, 11:01 AM   #1
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
The suspense is killing me.. dyno vid

Well, i finally have been able to get this setup fully tuned. its been a road full of speedbumps to say the least but oh well it was worth it. Sorry i know its not a mach but still my favorite 32v forum so ill post it up. I took the car back to a local tuner who put the basetune on it. I had some issues to work out and they all were fixed so i figured well its time to see what she can do.

In september 2016, the basetune (i call it) was applied and the car was pretty much broken in on the dyno and with tons of issues it made 370rw and a low 310tq. The car ran like a raped ape but the more issues i found i knew the more it was going to need a retune. Fast forward to this week, get the car on the rollers and im told that theyre SCT dyno software is offline and not reporting. LAME!!! But, i still want the car tuned so i can deal with no numbers.

The car this time was able to let the tuner put about 24* degrees total timing before showing some signs on the street of detonation. Which makes sense , since out here on the west coast our pump gas is only 91 octane. the tuner knows his **** and is big in the modular/coyote street scene out here so i take his word on opinions. He tells me on E85 itd be a beast but honestly if i have E85 in this car, its gonna have a huge centri on the front of it haha. Anyways the AFR is 12.8-12.9 all the way to limiter and has a wicked pull to it. Now im super anxious to get it to the track and put some time slips under my belt on this setup. They did say that they would be able to get me the dynosheet in 48-72 hours, but well see.

https://www.youtube.com/watch?v=1B7fEAKYQfo


In case anyone asks..
limiter set at 7200

Built 284ci 11.5cr
Comp stage 3s, degreed
01 cobra heads
roys ported polished mani
full bolt ons and some
Kooks longtubes
etc
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 06-08-2017, 03:16 PM   #2
TRbetngu
Registered User
 
TRbetngu's Avatar
 
Join Date: Aug 2011
Location: Rogers, AR
Posts: 1,070
Re: The suspense is killing me.. dyno vid

Awesome. Any guesses at all?

P.S.- that real wheel/tire fitment is perfect!
__________________
2003 AB Mach 1
Build date: June 19, 2003

-P1-SC kit
-Magnaflow Catted X w/ Borla Stingers
-MGW Shifter
-H&R SS springs
-18" AFS reps
-Treated better than my wife
TRbetngu is offline   Reply With Quote
Old 06-30-2017, 06:05 PM   #3
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: The suspense is killing me.. dyno vid

I saw the track vid earlier. Impressive!
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 07-05-2017, 03:39 PM   #4
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by 311-420 View Post
I saw the track vid earlier. Impressive!
Ha, thanks! are you on IG?.
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 07-07-2017, 01:30 PM   #5
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by Vndcatr View Post
Ha, thanks! are you on IG?.
No sir. My Mach is so rare it's difficult to even find it on the internet. Haha
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 07-07-2017, 02:33 PM   #6
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by 311-420 View Post
No sir. My Mach is so rare it's difficult to even find it on the internet. Haha
haha the only time ive seen a picture of your car is on here in a thread, think the wheel/tire thread im not sure haha.

was this the vid you seen? it def impressed me! im kinda curious what it would do with a sullivan..

https://youtu.be/2Do2ISCKW1Y
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 07-08-2017, 12:25 PM   #7
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by Vndcatr View Post
haha the only time ive seen a picture of your car is on here in a thread, think the wheel/tire thread im not sure haha.

was this the vid you seen? it def impressed me! im kinda curious what it would do with a sullivan..

https://youtu.be/2Do2ISCKW1Y
Yea it was the 117mph run. Did you ever get a graph?
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 07-10-2017, 11:14 PM   #8
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by 311-420 View Post
Yea it was the 117mph run. Did you ever get a graph?
No! it irritated me because i wanted to dissect it , but it would have to hit the rollers again for that.
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Old 07-27-2017, 06:24 PM   #9
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by Vndcatr View Post
No! it irritated me because i wanted to dissect it , but it would have to hit the rollers again for that.
You've put a lot into your car. Id have to know what the curves looked like if it was me. A sully may pull a bit harder at the very top, but would it be worth what you'd give up on the bottom end? A dyno might give you some idea...or more track testing
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 08-03-2017, 12:10 PM   #10
Vndcatr
SVT
 
Vndcatr's Avatar
 
Join Date: Jun 2010
Location: Northern California
Posts: 812
Re: The suspense is killing me.. dyno vid

Quote:
Originally Posted by 311-420 View Post
You've put a lot into your car. Id have to know what the curves looked like if it was me. A sully may pull a bit harder at the very top, but would it be worth what you'd give up on the bottom end? A dyno might give you some idea...or more track testing
Yea i do , and im wierd about dyno's so ill go back to where it was tuned at to get that since i know that one is spot on. My brothers and i talked about the sullivan upgrade, and i might do E85(track only) at the same time since im already setup for it. Then upgrade to the 26 spline input and clutch disk and try for a low 11sec slip ..All on non ported 01 heads
__________________
2001 Zinc yellow SVT Cobra
Forged 11.5CR 284ci
Comp 106500 cams - Degreed
01 cobra Heads - tastefully modded
Roys ported/polished Intake
Kooks longtubes, Magnaflow catback
D&D T3650, Mgw shifted
FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS
04 cobra interior , black termy seats, Speedhut gauges
Tubular K, MM coilovers/ Koni SA yellows
Starkweather tuned, 24* timing on 91 octane
11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs

Next up:Sullivan intake and hat, self tuning..
Vndcatr is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<