Installing a Procharger - 2003-04 Mach 1 Registry Owners Club

deancollins · 03-20-2017, 10:08 AM

Hi all,

I have my Procharger for my 04 Mach 1 and ready to get going!

Only thing not too sure about is the fuel line tool kit it mentions I need?

Any idea on which size (and what exactly it is!?)

Thanks!

deancollins · 03-20-2017, 11:20 AM

I have been told that the fuel line fitting release tools can come in different types such as:

https://mobiledistributorsupply.com/...du2wAod6skPsg#

http://www.autozone.com/test-scan-an...uestid=9017209

http://www.autozone.com/test-scan-an...uestid=9017954

Any idea's what one our Mach's require? Thanks!

DSG2003Mach1 · 03-20-2017, 12:46 PM

i dont remember the sizes but I believe if you get the folding style similar to the first link but that does 4 different sizes it will have you covered. Over here they have em at any auto parts place. I will say I fought and fought and fought the one on my fuel pump hat using the scissor style one, 2 different plastic style ones. I finally bought the anodized tool set and it popped right off.

deancollins · 03-21-2017, 05:45 AM

Not this one by any chance then?

https://www.youtube.com/watch?v=vRTjYAxvaCs

DSG2003Mach1 · 03-21-2017, 08:01 AM

Those work too

MAD_MACh1 · 03-22-2017, 12:18 PM

IMO the plastic ones from Auto zone work the best. I've had the folding metal one and it doesn't fit right. Not to mention it's a PITA to use. The plastic just slides in and pops them a part.

03-20-2017, 10:08 AM	#1
deancollins Registered User Join Date: Apr 2012 Location: London, England Posts: 166	Installing a Procharger Hi all, I have my Procharger for my 04 Mach 1 and ready to get going! Only thing not too sure about is the fuel line tool kit it mentions I need? Any idea on which size (and what exactly it is!?) Thanks! __________________ http://www.eurostang.com - American Muscle on Europes Roads

03-20-2017, 11:20 AM	#2
deancollins Registered User Join Date: Apr 2012 Location: London, England Posts: 166	Re: Installing a Procharger I have been told that the fuel line fitting release tools can come in different types such as: https://mobiledistributorsupply.com/...du2wAod6skPsg# http://www.autozone.com/test-scan-an...uestid=9017209 http://www.autozone.com/test-scan-an...uestid=9017954 Any idea's what one our Mach's require? Thanks! __________________ http://www.eurostang.com - American Muscle on Europes Roads

03-20-2017, 12:46 PM	#3
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Installing a Procharger i dont remember the sizes but I believe if you get the folding style similar to the first link but that does 4 different sizes it will have you covered. Over here they have em at any auto parts place. I will say I fought and fought and fought the one on my fuel pump hat using the scissor style one, 2 different plastic style ones. I finally bought the anodized tool set and it popped right off. __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

03-21-2017, 05:45 AM	#4
deancollins Registered User Join Date: Apr 2012 Location: London, England Posts: 166	Re: Installing a Procharger Not this one by any chance then? https://www.youtube.com/watch?v=vRTjYAxvaCs __________________ http://www.eurostang.com - American Muscle on Europes Roads

03-21-2017, 08:01 AM	#5
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Installing a Procharger Those work too __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

03-22-2017, 12:18 PM	#6
MAD_MACh1 Registered User Join Date: Mar 2010 Location: Wyoming, MI Posts: 425	Re: Installing a Procharger IMO the plastic ones from Auto zone work the best. I've had the folding metal one and it doesn't fit right. Not to mention it's a PITA to use. The plastic just slides in and pops them a part. __________________ SLP Long tubes and O/R X pipe, Magnaflow cat back, K&N CAI, PHP intake spacer, 01 Cobra intake cam, 4.10s

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)