2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > Mustangs Parts For Sale/Wanted

Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here!

Reply
 
Thread Tools Display Modes
Old 12-09-2017, 09:26 PM   #1
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
MHS stage 3 Turbo 4v cams

SOLD!

Up for sale is a set of Modular Head Shop 4v Stage 3 Turbo cams.

I bought a built engine on here not long ago, and this coming spring I plan to install it. the guy I bought it from was doing a turbo build, but I will be going with supercharger cams instead. I am planning to wait until spring to swap the cams, but if necessary I could get it done sooner.

These are brand new, they've only been installed, haven't been ran. Looking to get $750 for the set. here are the stats according to Modular Head Shop's site:

Part Number MHS-4V-STG3-T
Name 4V Stage 3 Turbo
Duration @ .050" 232 / 232
Lift .480" / .480"
Lobe Sep Angle 115 + 5
Center Lines 110 / 120
Springs Required? Yes
Suggested Valve Springs MHS / PAC Stage 3 or Stage 4
Valve Reliefs Required? No

These camshafts will support over 1200 WHP while still having excellent street manners. Ported Heads with matching valve job recommended. Stock, unported 03 / 04 Cobra and Mach 1 Heads OK. Single Groove valves recommended due to RPM Range. Designed for Larger Mid-Frame T4 or T6 Single Turbo with larger turbine wheel. 76/75 - 88/84 Single or 67/66 - 68/70 Twins. Ported Short Runner, Sullivan Single Plane or Hogan sheet metal Intake Manifold suggested. Shift points will be 7800 - 8200 RPM depending on Turbo / Intake combination. Will support up to 30lbs of boost. Built 4R70W, TH400 or Powerglide w/ Brake and 3400 - 3800 stall suggested.

For larger Single Turbo applications that may have some trouble spooling up, we suggest tightening up the LSA to 113. You will still want to run 5 Degrees of advance making your center lines 108 / 118.
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs

Last edited by FenixFallen; 10-11-2018 at 09:52 PM. Reason: SOLD
FenixFallen is offline   Reply With Quote
Old 03-31-2018, 09:00 PM   #2
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Bump. I will be swapping these out within the next couple weeks or so, starting my engine swap project. If anyone is doing a turbo build make an offer!
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs
FenixFallen is offline   Reply With Quote
Old 07-04-2018, 10:44 AM   #3
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Finally got the supercharger cams, took a lot longer than I wanted. These are available now. here are some pics.

There is some slight surface rust in a few spots, perhaps there wasn't enough assembly lube used. I have cleaned them up some with neveRdull and re-coated them with assembly lube, wrapping them in the packaging the new ones came with.





__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs

Last edited by FenixFallen; 08-15-2018 at 08:51 AM. Reason: adding pics
FenixFallen is offline   Reply With Quote
Old 08-08-2018, 08:31 PM   #4
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Bump, these are still available. more pics upon request.
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs
FenixFallen is offline   Reply With Quote
Old 08-15-2018, 08:50 AM   #5
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Dropped price to $750.





__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs
FenixFallen is offline   Reply With Quote
Old 09-16-2018, 11:27 AM   #6
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Dropped price to $700 shipped and listed them on Ebay.

https://www.ebay.com/itm/153181122849
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs
FenixFallen is offline   Reply With Quote
Old 10-11-2018, 09:51 PM   #7
FenixFallen
Newb
 
FenixFallen's Avatar
 
Join Date: Nov 2011
Location: Barre, Vermont
Posts: 206
Re: MHS stage 3 Turbo 4v cams

Sold
__________________
Black 2003 Mach 1, 483hp/451tq @6100 8.9psi
-Stock longblock, stock transmission, Procharger D1SC 4.15" pulley, Accufab 60mm TB, P/P intake manifold, full MAC exhaust, return style fuel system, Maximum Motorsports/Steeda suspension, Torsen T2R 31 spline diff

Red 2007 Focus ST, daily driver, 236hp/234tq @10psi
-FSWerks gt2871r kit, Cosworth intake manifold, FSWerks Stealth exhaust, FRPP lowering springs
FenixFallen is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:19 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<