2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "Show" Discussions > Car Shows, Cruises & Get Togethers

Car Shows, Cruises & Get Togethers List & Plan Shows, meets and cruises here. Both Regional & national.

Reply
 
Thread Tools Display Modes
Old 05-20-2010, 07:34 PM   #1
old school
Registered User
 
old school's Avatar
 
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
Annual Crab Run

Ok, roll call time , I got two dates in mind Aug.7th or Aug. 21st. Let me know what dates work best.

Chris
old school is offline   Reply With Quote
Old 05-20-2010, 07:48 PM   #2
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Annual Crab Run

Quote:
Originally Posted by old school View Post
Ok, roll call time , I got two dates in mind Aug.7th or Aug. 21st. Let me know what dates work best.

Chris
Aug. 21st works for me . The 7th is the White Marlin tournament in O.C..
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 05-20-2010, 08:35 PM   #3
Nekasrof
Hillclimb Extraodinaire
 
Nekasrof's Avatar
 
Join Date: Aug 2004
Location: Perkiomenville, PA
Posts: 2,594
Re: Annual Crab Run

7th is Polish Mountain and the 21st is Duryea. I'm out on those dates. The 14th or 28th works for us. Up to you.
__________________
RIP - Destroyed August 15, 2015

Motor + Procharger + driver = Baddest hillclimbing Mach 1 in the country
Mustang dyno: 538hp/481tq @ 14lbs/19deg timing
DynoJet comparison: 600hp/539tq

Looking for more hillclimbers!
Nekasrof is offline   Reply With Quote
Old 05-20-2010, 09:02 PM   #4
JDraper
On Permanant Vacation
 
JDraper's Avatar
 
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
Re: Annual Crab Run

Either one will work for us.
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun..
18 Shelby GT 350
04 Mach 1 (Sold 9/1/2018 )
18 Ford Explorer XLT
17 Mustang GT/CS Convertible
16 Fusion SE AWD Ecoboost
10 Fusion SE V6
66 289 Mustang Hardtop Restomod
JDraper is offline   Reply With Quote
Old 05-20-2010, 10:27 PM   #5
bris09
Registered User
 
bris09's Avatar
 
Join Date: Oct 2004
Location: Middletown, PA
Posts: 3,991
Re: Annual Crab Run

Can't do the 7th. Having a surprise 60th birthday party for mom. Before you say it, she doesn't like seafood.
__________________
Brian
04 Azure Mach 1
Mods:
Enough to not be the slowest, but nowhere near enough to be the fastest.

17 Fusion Sport
Now faster than the Mach

96 Laser Red Cobra Vert
For those days you just wanna cruise with the top down

89 Shelby CSX
Still rocking the VNT and Fiberides.
bris09 is offline   Reply With Quote
Old 05-20-2010, 10:39 PM   #6
CMEmach1
"281 SUPERCHARGED"
 
CMEmach1's Avatar
 
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
Re: Annual Crab Run

Quote:
Originally Posted by old school View Post
Ok, roll call time , I got two dates in mind Aug.7th or Aug. 21st. Let me know what dates work best.

Chris
I say we talk this over at Carlisle ....after a few of our favorite adult beverages. Any Sat in Aug works for me. Dang Brian....thanks for making me feel old....your mom's turning 60....I just turned 56 .....Sheesh!
__________________
'03 Azure Mach1 #719
Built 12/5/02, In Garage 12/13/02

The Ride is Over
It was a BLAST !
The Memories will Last Forever !
Thank You M1R !!!
CMEmach1 is offline   Reply With Quote
Old 05-21-2010, 11:07 AM   #7
TRMach1
Once Bitten-Twice Shy
 
TRMach1's Avatar
 
Join Date: Aug 2002
Location: New Castle, Delaware USA
Posts: 3,370
Re: Annual Crab Run

Can't make the 7th. Our family will be vacationing in the Outer Banks of North Carolina from the 7th to the 14th. The 21st or 28th would work though.
__________________
Mach1Registry.com Member #7
MCA Member #52787
Nice to meet you, my name's Jim

03 Torch Red Mach 1, 5-speed, IUP
Sold on July 21st 2012!

2011 Shelby GT500, Ebony Black, Silver Stripes, 6-speed
550hp 510tq Purchased July 23, 2012!
TRMach1 is offline   Reply With Quote
Old 05-21-2010, 01:09 PM   #8
SparksMach1
Shitin 'n Gitin
 
SparksMach1's Avatar
 
Join Date: Mar 2007
Location: Pasadena, MD
Posts: 1,416
Re: Annual Crab Run

Quote:
Originally Posted by TRMach1 View Post
Can't make the 7th. Our family will be vacationing in the Outer Banks of North Carolina from the 7th to the 14th. The 21st or 28th would work though.
Have a wedding out of state on the 7th, 21st is good for me.
__________________
2003 AB Mach --

442/435 @ the rear ALL MOTOR -Race Gas
FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's.
SparksMach1 is offline   Reply With Quote
Old 05-25-2010, 01:08 PM   #9
JDraper
On Permanant Vacation
 
JDraper's Avatar
 
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
Re: Annual Crab Run

We're in for the 7th. JDraper and two tagalongs
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun..
18 Shelby GT 350
04 Mach 1 (Sold 9/1/2018 )
18 Ford Explorer XLT
17 Mustang GT/CS Convertible
16 Fusion SE AWD Ecoboost
10 Fusion SE V6
66 289 Mustang Hardtop Restomod
JDraper is offline   Reply With Quote
Old 05-25-2010, 02:03 PM   #10
old school
Registered User
 
old school's Avatar
 
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
Re: Annual Crab Run

Date is Sat.Aug. 7th. 1:00 @ Woody's Northeast Md. Sorry that date doesn't work for all.More Info on cruise start & pickup points to follow as it gets closer.I'll start the list off for those who can make it & how many will be with you.

1. Old School (Chris)70' Mach (2)
2. Draper (Jeff) 04' Mach (3)
old school is offline   Reply With Quote
Old 05-25-2010, 04:15 PM   #11
SparksMach1
Shitin 'n Gitin
 
SparksMach1's Avatar
 
Join Date: Mar 2007
Location: Pasadena, MD
Posts: 1,416
Re: Annual Crab Run

so 4 of us said we can't make the 7th and the 21st is better, yet you chose the 7th, whats up with that man...?
__________________
2003 AB Mach --

442/435 @ the rear ALL MOTOR -Race Gas
FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's.
SparksMach1 is offline   Reply With Quote
Old 05-25-2010, 08:56 PM   #12
old school
Registered User
 
old school's Avatar
 
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
Re: Annual Crab Run

Quote:
Originally Posted by SparksMach1 View Post
so 4 of us said we can't make the 7th and the 21st is better, yet you chose the 7th, whats up with that man...?
The 21st turns out wasn't good on my end.....darn family commitments!!!
old school is offline   Reply With Quote
Old 05-25-2010, 09:02 PM   #13
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Annual Crab Run

Quote:
Originally Posted by old school View Post
The 21st turns out wasn't good on my end.....darn family commitments!!!
Yeah im thinking the molting rubber in the parking lot has a lot to do with it .



I didnt do it officer ! I wasnt even in the vacinity .

Why not try for July ? See you next week .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 05-25-2010, 09:06 PM   #14
04Mach1Blurr
Machinator
 
04Mach1Blurr's Avatar
 
Join Date: Jul 2008
Location: Leesburg, VA
Posts: 2,294
Re: Annual Crab Run

Haha maybe 2 crab runs...
__________________
2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon
04Mach1Blurr is offline   Reply With Quote
Old 05-25-2010, 09:56 PM   #15
CMEmach1
"281 SUPERCHARGED"
 
CMEmach1's Avatar
 
Join Date: Sep 2002
Location: West Grove Pa.
Posts: 1,716
Re: Annual Crab Run

We are in...Curt & Kim '03 Mach1
__________________
'03 Azure Mach1 #719
Built 12/5/02, In Garage 12/13/02

The Ride is Over
It was a BLAST !
The Memories will Last Forever !
Thank You M1R !!!
CMEmach1 is offline   Reply With Quote
Old 05-25-2010, 11:32 PM   #16
bris09
Registered User
 
bris09's Avatar
 
Join Date: Oct 2004
Location: Middletown, PA
Posts: 3,991
Re: Annual Crab Run

Quote:
Originally Posted by SparksMach1 View Post
so 4 of us said we can't make the 7th and the 21st is better, yet you chose the 7th, whats up with that man...?
That's ok, I'm probably not welcome anymore anyhow.

__________________
Brian
04 Azure Mach 1
Mods:
Enough to not be the slowest, but nowhere near enough to be the fastest.

17 Fusion Sport
Now faster than the Mach

96 Laser Red Cobra Vert
For those days you just wanna cruise with the top down

89 Shelby CSX
Still rocking the VNT and Fiberides.
bris09 is offline   Reply With Quote
Old 05-26-2010, 07:18 AM   #17
Linumup
Registered User
 
Linumup's Avatar
 
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
Re: Annual Crab Run

Quote:
Originally Posted by bris09 View Post
That's ok, I'm probably not welcome anymore anyhow.

Nothing wrong with that , plenty of potential .
__________________
1331 RWHP 1296 RWTQ 28 PSI
5.3 liter 322.4 cu.in. Big Bore Stroker
HP PNP Heads w/5 Angle Valve Job
HP Custom Cams
ATI Racing TH400 Cheetah SCS Air Assisted Shifter
Strange 31 spline axles w/3:55
F1R Procharger w/Cog Set-up
Magnafuel 750 -10AN Feed -8AN Return
200 Direct Wet w/MSD window switch & controller
Big Stuff 3 w/Gen. 3 Pro EFI system
Kooks 1.78 LTS 3" Custom Exhaust
Tuning by DGR Racing



DYNO KING
Linumup is offline   Reply With Quote
Old 05-26-2010, 07:21 AM   #18
JDraper
On Permanant Vacation
 
JDraper's Avatar
 
Join Date: Feb 2004
Location: McVeytown, PA
Posts: 5,013
Re: Annual Crab Run

Quote:
Originally Posted by bris09 View Post
That's ok, I'm probably not welcome anymore anyhow.

That a rental?
__________________
And then one day you find, 10 years have got behind you, no one told you when to run, you missed the starting gun..
18 Shelby GT 350
04 Mach 1 (Sold 9/1/2018 )
18 Ford Explorer XLT
17 Mustang GT/CS Convertible
16 Fusion SE AWD Ecoboost
10 Fusion SE V6
66 289 Mustang Hardtop Restomod
JDraper is offline   Reply With Quote
Old 05-26-2010, 07:58 AM   #19
03Mach1BoyAdam
Registered User
 
03Mach1BoyAdam's Avatar
 
Join Date: Sep 2007
Location: Cecil County, MD
Posts: 785
Re: Annual Crab Run

I'm in for either date
__________________
2003 Torch Red Mach 1 - 5 Speed IUP
Steeda Tri Ax Short Throw,Steeda Clutch Quadrant, Steeda Firewall Adjuster, Steeda Shock Tower Brace, MMR Rear Seat Delete, FRPP UCA's, Roush Stage 2 LCA's, Moser 31 Spline Axles, FRPP 31 Spline LSD, FRPP 4.10's, FRPP Aluminum DS, Swarr Rear Axle Brace, GMS Girdle, Steeda G Trac Bar, PHP Spacer, JLT RAI, Predator Tuner, 1/2" Shaker Extension, H&R SS Springs, MM C/C Plates, MAC Long Tubes, MAC O/R H Pipe, Magnaflow Magnapacks, 17x9 & 17x10.5 Black FR500's.
03Mach1BoyAdam is offline   Reply With Quote
Old 05-26-2010, 10:27 AM   #20
SparksMach1
Shitin 'n Gitin
 
SparksMach1's Avatar
 
Join Date: Mar 2007
Location: Pasadena, MD
Posts: 1,416
Re: Annual Crab Run

Quote:
Originally Posted by Linumup View Post
Yeah im thinking the molting rubber in the parking lot has a lot to do with it .



I didnt do it officer ! I wasnt even in the vacinity .

Why not try for July ? See you next week .
I'm down, lets make a second crab feast, but SOONER, I might be deploying again.
__________________
2003 AB Mach --

442/435 @ the rear ALL MOTOR -Race Gas
FRPP BOSS 5.0 block, 10.6:1 compression, Manley H-Beams; Diamond flat-top pistons, P&P heads W/ 5-angle valve job & ARP Head studs, PP upper/lower intake, Comp Stage 2 N/A cams, FR500 springs, valves, and followers, Tube K with coilovers and Bilsteins, Kooks, Stingers, 2.97 T-56 Magnum, 31 Spline Superior axles & Auburn-pro dif, built battle boxes, KB BAP w/ 39lb injectors, and 4:10's.
SparksMach1 is offline   Reply With Quote
Old 05-28-2010, 01:01 PM   #21
bris09
Registered User
 
bris09's Avatar
 
Join Date: Oct 2004
Location: Middletown, PA
Posts: 3,991
Re: Annual Crab Run

Quote:
Originally Posted by JDraper View Post
That a rental?
Yeah, I thought about doctoring the pic to hide the Idaho plate but figured that would make even more obvious.

I really hate to say this but with the exception of being ugly in the back it is a very nice car. Looks being equal it outperforms the 2010 V6 Mustang I had last year. I mention the 2010 because that is what the Camaro was. I really had fun with the paddle shifted 6spd auto while going through the Teton Pass.

Steve (aka Mr Evil) would love the Teton Pass. I decided to drive it since the plant operator said they shut it down once a year for a hill climb event. Lots of tight turns and grade changes.

http://maps.google.com/maps?f=q&sour...19991&t=h&z=13
__________________
Brian
04 Azure Mach 1
Mods:
Enough to not be the slowest, but nowhere near enough to be the fastest.

17 Fusion Sport
Now faster than the Mach

96 Laser Red Cobra Vert
For those days you just wanna cruise with the top down

89 Shelby CSX
Still rocking the VNT and Fiberides.
bris09 is offline   Reply With Quote
Old 05-28-2010, 06:23 PM   #22
old school
Registered User
 
old school's Avatar
 
Join Date: Oct 2004
Location: West Chester Pa.
Posts: 1,431
Re: Annual Crab Run

So Brian..is that a yes or no for the run ?
old school is offline   Reply With Quote
Old 06-04-2010, 02:05 PM   #23
NUMACHI
R CODE
 
NUMACHI's Avatar
 
Join Date: Mar 2004
Location: Hagerstown, Maryland
Posts: 1,087
Re: Annual Crab Run

Some more details would be helpful for others that may want to join this cruise. I have no idea what you are talking about or where you are starting/ending, etc.

Maybe its just me tho...
__________________
2003 Azure Blue Mach 5 Speed, IUP
- - - - - - - - - - - - - - - - - - - -
ALMOST STOCK
NUMACHI is offline   Reply With Quote
Old 06-04-2010, 02:08 PM   #24
GRB60
Registered User
 
GRB60's Avatar
 
Join Date: Feb 2004
Location: Harleysville, PA
Posts: 2,144
Re: Annual Crab Run

It starts in West Chester PA and goes to Woody's in Norteast, MD for crabs.
You may be invited back to Old School's for swimming and party continuation.
__________________
2003 Torch Red 5 spd w/ IUP
Built: 7/16/03
GRB60 is offline   Reply With Quote
Old 06-04-2010, 02:09 PM   #25
GRB60
Registered User
 
GRB60's Avatar
 
Join Date: Feb 2004
Location: Harleysville, PA
Posts: 2,144
Re: Annual Crab Run

Put me down for 2 on the 7th.
__________________
2003 Torch Red 5 spd w/ IUP
Built: 7/16/03
GRB60 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<