|
01-25-2016, 05:49 PM | #1 |
not builted
Join Date: Feb 2009
Location: perry ga
Posts: 1,183
|
I need this fitting!
I currently have a oil sending unit in this location for an autometer gauge. Its leaking very badly so Im going to take it off and plug the hole but I've lost the plug I took out. Does anyone know where I can find one or does anyone have one they'll sell? Thanks in advance.
__________________
2004 Torch Red Mach 1 - C&L cai, Kooks longtubes, Kooks o/r x-pipe, Magnaflow Magnapacks, Roy's 1/2" spacer, FRPP aluminum d/s, FRPP 4.10's, FRPP billet F/W, Ram HDX, MGW orange handle, H&R Super Sports |
01-25-2016, 06:22 PM | #2 |
Registered User
Join Date: Mar 2008
Location: Jersey Shore
Posts: 1,349
|
Re: I need this fitting!
Yeah Home depot......I took my sending unit out so that I can set up a pump spray to prime my engine when it finally gets done. I just went down to the depot and matched em up.
|
01-25-2016, 07:38 PM | #3 |
not builted
Join Date: Feb 2009
Location: perry ga
Posts: 1,183
|
Re: I need this fitting!
Ill try to get it on jackstands tomorrow and head to the depot. Im hoping its the sending unit that's leaking so much.
__________________
2004 Torch Red Mach 1 - C&L cai, Kooks longtubes, Kooks o/r x-pipe, Magnaflow Magnapacks, Roy's 1/2" spacer, FRPP aluminum d/s, FRPP 4.10's, FRPP billet F/W, Ram HDX, MGW orange handle, H&R Super Sports |
01-25-2016, 11:30 PM | #4 |
Registered User
Join Date: Jun 2006
Location: waller, tx
Posts: 1,225
|
I believe it to be 1/4 NPT. Any hardware or automotive store should carry it.
Sent from my SM-N910V using Tapatalk
__________________
'07.5 Duramax. '12 Cruze. '03 Mach. 2x GT.
John Deere 790. Bunch of Arctic Cats in pieces. 2 kitchen sinks, and a Partridge in a pear tree. |
01-27-2016, 11:49 PM | #5 |
Registered User
Join Date: Jun 2007
Location: Las Vegas
Posts: 1,086
|
Re: I need this fitting!
1/4 npt plug with a little permatex. Don't over tighten as that seem on the cars alimunim cracks very easy
|
01-28-2016, 12:21 PM | #6 |
not builted
Join Date: Feb 2009
Location: perry ga
Posts: 1,183
|
Re: I need this fitting!
I need to check and see if its already cracked. I cant find out where its leaking from. I just assumed it was from the sender since that's when the leak started.
__________________
2004 Torch Red Mach 1 - C&L cai, Kooks longtubes, Kooks o/r x-pipe, Magnaflow Magnapacks, Roy's 1/2" spacer, FRPP aluminum d/s, FRPP 4.10's, FRPP billet F/W, Ram HDX, MGW orange handle, H&R Super Sports |
01-28-2016, 12:52 PM | #7 |
Registered User
Join Date: Mar 2008
Location: Jersey Shore
Posts: 1,349
|
Re: I need this fitting!
yeah mine has had the tiniest leak from that area for a long time. I changed the adapter gasket and now I just did the oil pressure sensor and the aftermarket oil pressure senor. hopefully no more look. Gonna triple check for cracks though.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|