What oil filter? - 2003-04 Mach 1 Registry Owners Club

oldmach · 05-29-2021, 01:58 PM

Are you running a Synthetic oil filter?
I have a 2004 and can't seem to find the correct oil filter.
Sometimes it says a filter will fit. Then another place says it won't.
What number filter are you running and does it say Synthetic on it?
Thanks

DSG2003Mach1 · 05-30-2021, 01:58 PM

stock motorcraft filter.

hotford · 05-31-2021, 02:17 AM

^^^^^^^^^^dido^^^^^^^^^^^^^^^^

ASH302 · 06-01-2021, 11:44 AM

I've used the motorcraft ones, but also used many times the K&N oil filter. Never had a problem with either of them.

ASh

ASH302 · 06-01-2021, 11:47 AM

https://www.americanmuscle.com/ford-oilfilter-9610.html

https://lmr.com/item/FL820/1996-10-M...20s-Oil-Filter

Hope this helps.

ASh

ab_mach1 · 06-01-2021, 12:41 PM

I've used the K&N many times over the years without a problem. Last fill, I went with a Mobil 1 (M1-210A) because I read an article on Consumer Reports about their quality compared to all the others and it was dubbed best. I didn't notice any difference, so I tried an Amsoil (EA011) the most recent fill and didn't notice a difference there either. I'll probably just go with the Motorcraft FL-820S this summer when I change the oil. I just want a consistent quality built filter and I feel like Amsoil, Mobil 1, and Motorcraft will meet that need compared to others out there.

DSG2003Mach1 · 06-01-2021, 12:57 PM

Quote:

Originally Posted by ab_mach1

I've used the K&N many times over the years without a problem. Last fill, I went with a Mobil 1 (M1-210A) because I read an article on Consumer Reports about their quality compared to all the others and it was dubbed best. I didn't notice any difference, so I tried an Amsoil (EA011) the most recent fill and didn't notice a difference there either. I'll probably just go with the Motorcraft FL-820S this summer when I change the oil. I just want a consistent quality built filter and I feel like Amsoil, Mobil 1, and Motorcraft will meet that need compared to others out there.

unless you're doing an oil analysis after each change I don't think you're going to "see" a difference, especially not in a single change interval. It would be one of those things over the life of the vehicle wear may end up being accelerated or you have a filter failure and lose a motor.

TTSaleen · 01-10-2023, 04:55 PM

I haven't been on here in a while, so catching up.
On my Mach1 (which is a built/forged/supercharged/E85 combo), I use either the Ford FL820S or the shorter Mobil 1 M1-210A.
Either will work just fine.
The Mobil 1 filter is slightly shorter and installs easier in my application as it clears my K-member support better than the FL820.

Ryan

05-29-2021, 01:58 PM	#1
oldmach Registered User Join Date: Jan 2021 Location: Parsons West Virginia Posts: 25	What oil filter? Are you running a Synthetic oil filter? I have a 2004 and can't seem to find the correct oil filter. Sometimes it says a filter will fit. Then another place says it won't. What number filter are you running and does it say Synthetic on it? Thanks

05-30-2021, 01:58 PM	#2
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: What oil filter? stock motorcraft filter. __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

05-31-2021, 02:17 AM	#3
hotford Registered User Join Date: Jan 2005 Location: Durham/Canada Posts: 236	Re: What oil filter? ^^^^^^^^^^dido^^^^^^^^^^^^^^^^ __________________ 1982 GT 2003 Mach 1 2003 Marauder 2011 Shelby GT 500

06-01-2021, 11:44 AM	#4
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: What oil filter? I've used the motorcraft ones, but also used many times the K&N oil filter. Never had a problem with either of them. ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

06-01-2021, 11:47 AM	#5
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: What oil filter? https://www.americanmuscle.com/ford-oilfilter-9610.html https://lmr.com/item/FL820/1996-10-M...20s-Oil-Filter Hope this helps. ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

06-01-2021, 12:41 PM	#6
ab_mach1 Lorraine's driver Join Date: Apr 2012 Location: Indianapolis, IN Posts: 2,442	Re: What oil filter? I've used the K&N many times over the years without a problem. Last fill, I went with a Mobil 1 (M1-210A) because I read an article on Consumer Reports about their quality compared to all the others and it was dubbed best. I didn't notice any difference, so I tried an Amsoil (EA011) the most recent fill and didn't notice a difference there either. I'll probably just go with the Motorcraft FL-820S this summer when I change the oil. I just want a consistent quality built filter and I feel like Amsoil, Mobil 1, and Motorcraft will meet that need compared to others out there. __________________ Instagram: @azurblumach1 SCT X3 with LaSota Racing tune Borla Stingers w/JBA off road H pipe MGW short shifter w/comfort handle Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates

01-10-2023, 04:55 PM	#8
TTSaleen SVT Enthusiast Join Date: Jul 2014 Location: NC Posts: 279	Re: What oil filter? I haven't been on here in a while, so catching up. On my Mach1 (which is a built/forged/supercharged/E85 combo), I use either the Ford FL820S or the shorter Mobil 1 M1-210A. Either will work just fine. The Mobil 1 filter is slightly shorter and installs easier in my application as it clears my K-member support better than the FL820. Ryan __________________ Current - 1998 Saleen Black - Twin Turbo 5.4 - 1,100+ rwhp (5.0 Magazine's Battle at the Beach Dyno Winner 2013) 2003 Mach 1 - Azure Blue 800rwhp on E85 Instagram - ttsaleen YouTube - 98saleen Former - 2003 Mach 1 - Torch Red - Auto - Eaton Swap = 472rwhp Link to build thread - http://www.mach1registry.org/forums/...d.php?t=132733

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode