2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 11-07-2017, 06:33 PM   #76
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by McQueen_z71 View Post
really digging that Mach manifold. Does the single runner style work really well with the higher forced induction. Havent really found any writeups on this style of modding the manifold.
well...here is the thing. I made over a 35 hp MORE with my last set up once I switched over to that type of intake over a stock one. FOR ME it was well worth it.
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 11-12-2017, 10:48 AM   #77
McQueen_z71
Registered User
 
McQueen_z71's Avatar
 
Join Date: Mar 2014
Location: South Bend,IN
Posts: 105
Re: New build

Quote:
Originally Posted by littlemags View Post
well...here is the thing. I made over a 35 hp MORE with my last set up once I switched over to that type of intake over a stock one. FOR ME it was well worth it.
Sounds like it was pretty benifical to you. Always interesting to see all the different things people do to mod the stock lower and make it work way better then originally.
__________________
04 Competition Orange Mach 1
McQueen_z71 is offline   Reply With Quote
Old 05-31-2018, 01:36 PM   #78
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

How's the progress?
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 06-14-2018, 08:00 AM   #79
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by TKat13 View Post
How's the progress?
wow....it is going for sure. Been collecting parts and working and pretty much changing everything. I have been redoing entire rear end too. 9" outlaw rear end from Team Z...mini tubs, upper and lower new control arm mounts, thru floor frame ties and wolfe cm cage. I need to have chassis done by the fall and everything painted. Then can start reassembly. Mini tubs are MESSY time consuming process.

I will post more pics of progress...
Attached Thumbnails
IMG_1178.jpg   IMG_1266.jpg   IMG_1270.jpg   IMG_1305.jpg   IMG_1304.jpg  

__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-14-2018, 08:01 AM   #80
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

BTW I tack everything in to measure out...if everything is cool I will finish welding rest
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-14-2018, 09:51 AM   #81
sutyak
it's soo-tack
 
sutyak's Avatar
 
Join Date: Nov 2002
Location: Fairmont, WV
Posts: 2,082
Re: New build

Looks like a fun but tedious project. Definitely some big difference in metal thickness there.
__________________
mark
2004 DSG Mach 1. Built motor. Turbo. 667whp
2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold)
2003 DSG Mach 1. 12.65 @ 106 (sold)
sutyak is offline   Reply With Quote
Old 06-14-2018, 02:01 PM   #82
Phil
Nitrous Junkie
 
Phil's Avatar
 
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
Re: New build

Quote:
Originally Posted by littlemags View Post
wow....it is going for sure. Been collecting parts and working and pretty much changing everything. I have been redoing entire rear end too. 9" outlaw rear end from Team Z...mini tubs, upper and lower new control arm mounts, thru floor frame ties and wolfe cm cage. I need to have chassis done by the fall and everything painted. Then can start reassembly. Mini tubs are MESSY time consuming process.

I will post more pics of progress...
That's a hell of an awesome build going on!!
__________________
Phil
PRB Machining, LLC
http://www.prbmachining-absdeleteman...com/index.html

Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio
http://www.crt-performance.com/
Phil is offline   Reply With Quote
Old 06-14-2018, 02:36 PM   #83
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by Phil View Post
That's a hell of an awesome build going on!!
thanks Phil....I remember back in the day following yours....I used a lot of your ideas when I first started.
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-14-2018, 03:10 PM   #84
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Awesome! Yes, we need more pictures, I'd rather learn from you than, well, when I mess up doing mine. lol
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 06-14-2018, 03:17 PM   #85
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

this is WHY I decided to change the lowers...
Attached Thumbnails
54854991414__10B707A9-0196-405A-A9AA-ADD8C4A5D6B6.JPG  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-14-2018, 03:18 PM   #86
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by TKat13 View Post
Awesome! Yes, we need more pictures, I'd rather learn from you than, well, when I mess up doing mine. lol
I will post up some along the way photos to show how I came to this point. I have a LOT still to do BUT will post up
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-14-2018, 03:23 PM   #87
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Quote:
Originally Posted by littlemags View Post
wow....it is going for sure. Been collecting parts and working and pretty much changing everything. I have been redoing entire rear end too. 9" outlaw rear end from Team Z...mini tubs, upper and lower new control arm mounts, thru floor frame ties and wolfe cm cage. I need to have chassis done by the fall and everything painted. Then can start reassembly. Mini tubs are MESSY time consuming process.

I will post more pics of progress...
what Shock/spring setup are you planning on using? I ask because I trying to decide between coil-overs or the 'stock-like' spring kit from Wolfe.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 06-14-2018, 05:19 PM   #88
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

With mini tub I will be using team z coilover setup with the 9 inch. For springs I do plan on viking
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-17-2018, 05:28 PM   #89
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

thru the floor frame ties...25.5 full length from Wolfe race craft. Lots of cutting, fitting, cutting and more fitting...lol
STILL a lot more to cut and fit. then I will tack in..level out car before final weld to make sure all is set.
Attached Thumbnails
IMG_1391.jpg   IMG_1397.jpg   IMG_1402.jpg  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-17-2018, 06:33 PM   #90
DSG2003Mach1
700 HP Mach
 
DSG2003Mach1's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
Re: New build

Yikes! Cutting up the car like that takes some balls man!
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...

'12 F150 FX2 Supercrew with Ecoboost daily beater
DSG2003Mach1 is offline   Reply With Quote
Old 06-17-2018, 07:14 PM   #91
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

Quote:
Originally Posted by DSG2003Mach1 View Post
Yikes! Cutting up the car like that takes some balls man!
just average fab skills...and not having fear
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-17-2018, 08:17 PM   #92
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: New build

Can this be put back to stock?


















__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 06-18-2018, 12:44 PM   #93
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Quote:
Originally Posted by 311-420 View Post
Can this be put back to stock?

I was thinking, man I thought Dillon was smarter than this... then I scrolled down... got me.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 06-18-2018, 06:53 PM   #94
BONESTOCK
Registered User
 
Join Date: Jul 2004
Location: Raleigh , NC
Posts: 2,093
Re: New build

Haha!! Awesome thread!
__________________
2004 Torch Red Procharged Mach 1
BONESTOCK is offline   Reply With Quote
Old 06-18-2018, 08:17 PM   #95
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

it was 95* degrees over the weekend so i couldnt finish since my garage is without AC..
I am sure some of you guys understand the work that goes into something like this but others may not.

I will try to post a few more photos as i go along too since some of the things are new to me. I have guys like Roy Cole to give advise too since his car was done like mine YEARS ago...

and no it wont go back to stock...haha...
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 06-27-2018, 03:27 PM   #96
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

update:
just receiving parts while I am installing 25.5 thru the floor frame ties connectors. New column from motion raceworks, strange quick release and strange double adjustable rear coilovers for the inboard on 9" rear.
Debating on ordering carbon fiber tubs since they will be a center point on my rear end build area.
team z almost done with 9" outlaw rear end and once I get that will start installing and measuring out everything.
Will post pics again as I go. I need to have my chassis done by August/ September so I can paint before it gets to cold.
Then the process of installing brake lines, electrical and motor back in car...
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 08-06-2018, 04:41 PM   #97
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

thru the floor frame ties completed and starting new cage install. 2x2 main frame rail with 3x2 outriggers. I will only tack in the outriggers...then tack in the new cage. ROY will be coming over to help me with final TIG of the cage but coming along good
Attached Thumbnails
858B07B1-13F9-4E50-8C0E-A9D8225AB9CA.JPG   509457D6-EE22-476D-BE5B-1450902EE8C8.JPG   IMG_1860.jpg   IMG_1863.jpg   IMG_1867.jpg  

__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 08-06-2018, 04:43 PM   #98
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

more pics
Attached Thumbnails
IMG_1908.jpg   IMG_1904.jpg  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 08-07-2018, 09:40 AM   #99
littlemags
finally paid for
 
littlemags's Avatar
 
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
Re: New build

tacked in main hoop to get a feel on how everything will lay out. So far it fits TIGHT and everything looks good. I just laid the forward bars in and rest the passenger door bar to ensure everything is good. This should work out well.
Attached Thumbnails
IMG_1951.jpg   IMG_1952.jpg   IMG_1953.jpg   IMG_1954.jpg  
__________________
2004 mach 1-turbo build in progress..
Fast xfi 2.0
OLD combo-
826rwhp/720 trq -100 shot NX
9.13@154 on 100 shot
NEW- in progress...
littlemags is offline   Reply With Quote
Old 08-10-2018, 12:39 PM   #100
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: New build

Quote:
Originally Posted by littlemags View Post
more pics
Nice head gear!
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<