2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > General Registry Discussion

General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums.

Reply
 
Thread Tools Display Modes
Old 04-09-2018, 03:42 AM   #1
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
How much HP/TQ needed to run 10's in Mach 1?

Just curious, how much HP/TQ are you putting down on the dyno to consistently run in the 10's at 1/4 miles? I know there are many variables like weight, aerodynamics, tires (traction), gears, and suspension, but what are Mach 1 owners generally putting down at the wheels?
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 04-09-2018, 03:46 PM   #2
Mike03Mach
Registered User
 
Mike03Mach's Avatar
 
Join Date: Mar 2017
Location: Tucson, Az
Posts: 160
Re: How much HP/TQ needed to run 10's in Mach 1?

Getting ready for some serious upgrades?
__________________
1st: 1998 v6
2nd: 2000 GT
Current: 2003 Mach 1
Mike03Mach is offline   Reply With Quote
Old 04-09-2018, 10:32 PM   #3
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: How much HP/TQ needed to run 10's in Mach 1?

Yeah, installing a Procharger kit with the D1X head unit this fall. Trying to figure out what combination of supporting mods would get me into the 10s in the 1/4 mile. Next month, I'll upgrade the gears. Maybe 3.73s or 4.10s to help to centri blower in the acceleration department since they don't make the low end power like positive displacement blowers. I'll also upgrade to 31 spline axles when I do that. Get a good set of drag radials to put out back for traction.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Old 04-10-2018, 01:50 PM   #4
Mike03Mach
Registered User
 
Mike03Mach's Avatar
 
Join Date: Mar 2017
Location: Tucson, Az
Posts: 160
Re: How much HP/TQ needed to run 10's in Mach 1?

Good luck, I'll be keeping an eye on this one.
__________________
1st: 1998 v6
2nd: 2000 GT
Current: 2003 Mach 1
Mike03Mach is offline   Reply With Quote
Old 04-10-2018, 08:10 PM   #5
SouthKak_Mach1
Registered User
 
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
Re: How much HP/TQ needed to run 10's in Mach 1?

Quote:
Originally Posted by Mike03Mach View Post
Good luck, I'll be keeping an eye on this one.
I'll keep you guys on the forum informed about the D-1X Procharger install
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna
SouthKak_Mach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<