SHM Oil Separator Breather

[jayslx1]

Anyone had any experience with this:

http://www.seanhylandmotorsport.com/...es-components/


SHM Oil Breather Separator
SHM-BRE-1 $119.95 $109.95 buy

Reduce oil consumption and Detonation!
This is an essential component that can reduce or eliminate oil consumption through the intake system. If you’ve removed your throttle body and noticed oil buildup then you need an oil breather separator to absorb the oil and prevent it’s passage into the intake system.

SHM Recommends the use on an oil breather separator for all supercharged and high performance naturally aspirated applications. It is especially beneficial for vehicles used for open track events, where vehicles run wide open for extended periods of time.

CNC Machined Billet Aluminum Oil Breather Separator Utilizing a 1/2″ Poly fitting. Connects to the factory valve cover breather hose that feeds into the air inlet tube/throttle body assembly.

A Five component assembly with a lower and upper housing, two screens and an oil vapor/mist filter media. The housing threads together utilizing a rubber seal. This facilitates inspection of the filter media. The filter media is sandwiched be two aluminum screens, which allow the oil vapor/mist to be absorbed and collected by the filter, and then passed back through the lower screen.

Note: Direct replacement for 4.6L DOHC. 2V with aluminum valve covers may also be a direct replacement. 2V plastic covers will require modifications and installation of a rubber grommet (instructions and grommet not included

[Flash88]

I would just run a catch can or filter. that seems a tad pricey to me