|
|
Tuning & Dyno Testing/Results Questions, experiences & results for electronic tuning and dyno tests |
|
Thread Tools | Display Modes |
04-14-2018, 09:46 PM | #1 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
My Dyno Session with Mach 1
I decided to come out to Hawk Speed & Custom's 2nd Annual Dyno Day in Huachuca City, AZ just to see what the Mach put down before installing Procharger D-1X in the fall. They were doing 3 pulls for $50. Had a decent amount of cars that showed up, Corvette Z06s, 392 Challengers, Roush supercharged '16 Mustang GT, '03 Mustang GT, Camaro SS, BMW 335i, Ford F-350, Scout II, SRT Neon, Turbocharged Honda Civics, Dodge Ram SRT-10, etc...The only performance mods I have done to the Mach are Borla Stingers catback, C&L intake, and a Bama 91 octane canned tune (No 93 octane in AZ).
Results below: Run #1: HP: 282.7 @ 4200(RPM), Torque: 370.4 @ 3750(RPM) Run #2: HP: 284.0 @ 4550(RPM), Torque: 352.5 @ 3900(RPM) Run #3: HP: 285.2 @ 4400(RPM), Torque: 354.4 @ 3700(RPM) Fuel: Shell 91 octane pump gas Elevation: ~4,400 feet (Huachuca City, AZ) Temperature: Between 78.4-79.3 degrees fahrenheit Humidity: 4-5% Date: April 14, 2018 Time of Day: 2:16-2:18pm Gear Ratio: 3.55 (Stock)
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna Last edited by SouthKak_Mach1; 04-15-2018 at 08:32 PM. |
04-15-2018, 02:46 AM | #2 |
And Leadfoot
Join Date: Sep 2004
Location: Easy Street
Posts: 6,468
|
Re: My Dyno Session with Mach 1
I'm not understanding the low RPM's for the horsepower and the astronomical torque numbers. Is that an elevation thing or what?
__________________
'23 Fighter Jet Gray Mach 1 (Automatic, 470hp/410tq) '04 Azure Blue Mach 1 (5Spd., 305hp/320tq) '17 Blue Streak Dodge Ram 1500 Quad Cab 4X4 (Automatic, 395hp/410tq) "She's An Underage Angel With A Dented Halo"-She Needs Rock n Roll---Motley Crue Every now and then, say What The F***. What The F***, gives you freedom. With freedom comes opportunity. Opportunity, makes your future. If you can't say it.......you can't do it.----Miles |
04-15-2018, 03:17 AM | #3 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
Re: My Dyno Session with Mach 1
Yeah, when I checked the dyno sheet, I was a little confused by the torque numbers too. I do believe the elevation is the key factor in my dyno results. I wish I had datalogged my dyno runs too. The numbers are pretty consistent between pulls though, with the exception of the TQ # in 1st pull.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna |
04-15-2018, 06:55 AM | #4 |
Registered User
Join Date: Apr 2016
Location: Fresno CA
Posts: 69
|
Re: My Dyno Session with Mach 1
Why is your horsepower peaking so low? Power on these cars usually peaks at around 6000 RPM. Also there is only a 500 RPM spread between the torque and horsepower peak? That looks way wrong.
|
04-15-2018, 02:19 PM | #5 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
Re: My Dyno Session with Mach 1
I'll post my dyno sheet today. Maybe you guys can help me understand the results a little more. Didn't really get a chance to talk with the tuners at Hawk Speed yesterday since they were busy.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna |
04-15-2018, 08:37 PM | #6 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
Re: My Dyno Session with Mach 1
On the first pull, I got off the accelerator around 5k, because I heard a weird noise coming from the engine bay, but it stopped and didn't hear it again.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna |
04-16-2018, 10:51 AM | #7 |
Registered User
Join Date: Mar 2008
Location: derry nh
Posts: 302
|
Re: My Dyno Session with Mach 1
I know this sounds strange but I was having an issue with dyno pulls a couple years ago, and the tuner saw a voltage fluxuation from the alternator. Replaced it went back, and it cleared up my problem.
__________________
lifes to short to race anything else |
04-16-2018, 05:52 PM | #8 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: My Dyno Session with Mach 1
Hang on- did you operate the dyno yourself? Did you pull in 4th?
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
04-16-2018, 10:51 PM | #9 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
Re: My Dyno Session with Mach 1
Yeah, I was the one operating the car on the dyno, but the owner of the shop was the one conducting the dyno session. We were using one of those trailer dyno outside of the shop for the Dyno Day. I turned off the traction control & overdrive, and revved the engine up to 2500 RPMs in 3rd before I made pulls, then I just signaled to him right before I let off the accelerator to end the pull. On the first pull I got off the accelerator right before 5k due to weird noise, but the noise went and never came back. My Mach 1 is a 4-speed auto (4R75W) by the way.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna Last edited by SouthKak_Mach1; 04-17-2018 at 11:58 PM. Reason: Additional info |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|