AB guys post up! - 2003-04 Mach 1 Registry Owners Club

Mudd92 · 06-10-2010, 11:58 AM

Was hoping the AB folks could post pics of there wheels and what brand they are.. trying to decide on wheels. Really wanting to do the TF Chicanes or sleepers, im looking at a few but wanting to see how they look an the AB machs.

Thanks!

machgsxr · 06-10-2010, 12:46 PM

Mudd92 · 06-10-2010, 04:12 PM

Thanks man are those ccw's or the tf? keep the pics rollin!!

machgsxr · 06-10-2010, 05:18 PM

Quote:

Originally Posted by Mudd92

Thanks man are those ccw's or the tf? keep the pics rollin!!

the tf. I tried attaching some but they didn't work.

Mudd92 · 06-10-2010, 06:26 PM

Bummer, do you know how much they weigh in at?

jh 2004 mach · 06-10-2010, 08:59 PM

best pic i have afs chrome mach 1 wheels

marc813 · 06-10-2010, 10:16 PM

here is a link to azure blue mach wheel thread and then here is my car on 18'' black FR500s. http://www.mach1registry.org/forums/...ad.php?t=72711

also here is true forged site not sure if you saw these but here are 2 azure machs with true forged wheels
http://www.trueforgedwheels.com/cars...=521&g2_page=1

04Mach1FTW · 06-10-2010, 11:35 PM

^ sexy sexy

Mudd92 · 06-11-2010, 06:55 AM

Yea I saw those to, thanks man! Just tryin to get a feel for all them on the cars, but everyones pics are diffrent so it makes it alot better for me to figure out if i like them haha

madtracker22 · 06-11-2010, 08:51 AM

I love mine.. old pics but car still looks the same. 18" hypercoated fr500's 265/295

Detroitmach · 06-11-2010, 01:05 PM

I have an AB that I am going to be changing the wheels in the next couple months so I will be checking this thread often... please keep the pics coming.

I really like the AFS Chrome Mach1 wheels with the dd in the back. Looks nice

N/AKing · 06-11-2010, 01:25 PM

PeteEpple · 06-11-2010, 01:37 PM

18-inch 10th Anniversary Cobra Replicas from Late Model Restoration.

Mudd92 · 06-11-2010, 01:49 PM

Anyone got pics of the Mach 5s by TF, lol? Im pretty sure im set on a set of TF's im just trying to figure out which design i like haha!

MachyMach · 06-11-2010, 06:41 PM

I know I know I need to lower her.....I'll get to it lol.

Rims are 17x9 Black Cobras all around with 275/40/17 Nitto 555's.

G · 06-11-2010, 11:31 PM

10th Anniv Cobra wheels.

Mudd92 · 06-13-2010, 12:12 AM

Lookin awsome folks, keep em coming!! Esp. anyone with some TF's hah!

MachRan · 07-03-2010, 02:18 PM

My old car.

USACUBS · 07-03-2010, 02:48 PM

I don't mind the extra weight, so I use the Ford Chrome Magnum's. I personally LOVE this rim on this car, especially the chrome.

Detroitmach · 08-06-2010, 01:37 PM

17x9 w/275 & 17x10.5 w/315 drag. 03 chrome cobra's

06-10-2010, 11:58 AM	#1
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	AB guys post up! Was hoping the AB folks could post pics of there wheels and what brand they are.. trying to decide on wheels. Really wanting to do the TF Chicanes or sleepers, im looking at a few but wanting to see how they look an the AB machs. Thanks! __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

06-10-2010, 12:46 PM	#2
machgsxr Registered User Join Date: Feb 2005 Location: San Antonio Posts: 6,414	Re: AB guys post up!

06-10-2010, 04:12 PM	#3
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: AB guys post up! Thanks man are those ccw's or the tf? keep the pics rollin!! __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

06-10-2010, 06:26 PM	#5
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: AB guys post up! Bummer, do you know how much they weigh in at? __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

06-10-2010, 08:59 PM	#6
jh 2004 mach Registered User Join Date: Sep 2008 Location: trevor, Wisconsin Posts: 431	Re: AB guys post up! best pic i have afs chrome mach 1 wheels Attached Thumbnails __________________ SOLD 2004 AZURE MACH1.

06-10-2010, 10:16 PM	#7
marc813 Registered User Join Date: Feb 2009 Location: Daytona Beach, Fl Posts: 76	Re: AB guys post up! here is a link to azure blue mach wheel thread and then here is my car on 18'' black FR500s. http://www.mach1registry.org/forums/...ad.php?t=72711 also here is true forged site not sure if you saw these but here are 2 azure machs with true forged wheels http://www.trueforgedwheels.com/cars...=521&g2_page=1 __________________ American Thunder 2 chamber exhaust, Pypes off road X-Pipe, JLT Ram Air Intake, SCT tune at Lamotta Performance, Moser 31 spline axles, 31 spline differental, FRPP 4:10 gears, Steeda Upper & Lower Control Arms, NGK Spark Plugs, 03-04 Cobra Mirrors, 18x9 & 18x10 Black Fr500s w/BFG KDWs, MGW Orange Handle Shifter, H&R Super Sport Springs, MM 4 Bolt CC Plates, Corbeau CR1 suede Seats 300 RWHP...318 Torque

06-10-2010, 11:35 PM	#8
04Mach1FTW Registered User Join Date: May 2010 Location: Ohio Posts: 378	Re: AB guys post up! ^ sexy sexy __________________ Ben - 04 Mach 1 -Mac LT, LP o/r x, Mangaflow cb, K&N CAI, MMR 1/2" spacer, Custom cams, degreed ftw 356/339 12.04 @ 113.9 -Is it bench racing if the car hasnt ran in a year?

06-11-2010, 06:55 AM	#9
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: AB guys post up! Yea I saw those to, thanks man! Just tryin to get a feel for all them on the cars, but everyones pics are diffrent so it makes it alot better for me to figure out if i like them haha __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

06-11-2010, 08:51 AM	#10
madtracker22 Registered User Join Date: May 2006 Location: Houston, TX Posts: 316	Re: AB guys post up! I love mine.. old pics but car still looks the same. 18" hypercoated fr500's 265/295 __________________

06-11-2010, 01:05 PM	#11
Detroitmach Registered User Join Date: Apr 2010 Location: Detroit Posts: 195	Re: AB guys post up! I have an AB that I am going to be changing the wheels in the next couple months so I will be checking this thread often... please keep the pics coming. I really like the AFS Chrome Mach1 wheels with the dd in the back. Looks nice

06-11-2010, 01:25 PM	#12
N/AKing Registered User Join Date: Jun 2008 Location: Maumee, Ohio Posts: 424	Re: AB guys post up! __________________ Catback only......12.9 @ 106 w/ 1.8 60ft P1SC 435whp 407torque---11.90 @ 119 CRT-Performance Tuned (Norwalk, Ohio)

06-11-2010, 01:37 PM	#13
PeteEpple Registered User Join Date: Apr 2010 Location: Tampa, Florida Posts: 738	Re: AB guys post up! 18-inch 10th Anniversary Cobra Replicas from Late Model Restoration. Attached Thumbnails __________________ 3 pedals... 2 bottles... and 1 loose nut behind the wheel!

06-11-2010, 01:49 PM	#14
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: AB guys post up! Anyone got pics of the Mach 5s by TF, lol? Im pretty sure im set on a set of TF's im just trying to figure out which design i like haha! __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey Last edited by Mudd92; 06-11-2010 at 02:10 PM.

06-11-2010, 06:41 PM	#15
MachyMach Registered User Join Date: Jan 2010 Location: Palm Beach Gardens, Florida Posts: 71	Re: AB guys post up! I know I know I need to lower her.....I'll get to it lol. Rims are 17x9 Black Cobras all around with 275/40/17 Nitto 555's.

06-11-2010, 11:31 PM	#16
G Undocumented Member Join Date: Feb 2004 Location: Enterprise, AL Posts: 15,828	Re: AB guys post up! 10th Anniv Cobra wheels. __________________ _____________________________________________ 2003 Mach1 AB 5spd 2004 Mach1 TR 5spd (sold) 1933 Ford 3W Coupe (4.6 dohc Stack Injection) 2003 Cobra TR (sold) 2014 Mustang GT (Track Pack) in Black

06-13-2010, 12:12 AM	#17
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: AB guys post up! Lookin awsome folks, keep em coming!! Esp. anyone with some TF's hah! __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

07-03-2010, 02:18 PM	#18
MachRan Registered? Join Date: Oct 2003 Location: Havre de Grace, MD Posts: 1,071	Re: AB guys post up! My old car. Attached Thumbnails __________________ 87 Turbo T Limited 10k org miles 87 Turbo T light chestnut (sold) 86 SVO 7B (sold) 95 Cobra 347 (SOLD) 03 Azure blue 5 spd (SOLD) 93 Calypso coupe (SOLD) 90 LX Vert (SOLD) 86 GT (SOLD)

07-03-2010, 02:48 PM	#19
USACUBS Registered User Join Date: Dec 2005 Location: Round Lake Beach, IL Posts: 209	Re: AB guys post up! I don't mind the extra weight, so I use the Ford Chrome Magnum's. I personally LOVE this rim on this car, especially the chrome. Attached Thumbnails

08-06-2010, 01:37 PM	#20
Detroitmach Registered User Join Date: Apr 2010 Location: Detroit Posts: 195	Re: AB guys post up! 17x9 w/275 & 17x10.5 w/315 drag. 03 chrome cobra's __________________ 04 Azure Blue - 5 spd. 03-04 Cobra front bumper Complete UPR Front & Rear Suspension w/ K Member Caster Camber Plates Steeda Bump Steer 4.10 Gears Tri Ax Shifter Bassani Headers Custom Xpipe w/o cats Magnaflow Cat Back Exhaust Custom Tune - Alternative Performance Sequential Tail Lights 03 Chrome Cobra Rims 17x9 275 - 17x10.5 315 DR 313 RWHP Write up in Racepages Magazine - June 2010 http://nmradigital.com/rpmagazine/june10/index.htm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)