|
10-26-2017, 03:53 PM | #1 |
Registered User
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
|
Help Identifying Extension/Delete
So I hit a monster coyote on the highway (RIP my front bumper) and he ended up getting pulled underneath. Didn't think much of it till I started hearing a metal clinking/jingling sound. Finally got around to putting the car on stands and found one of the O2 sensor's cables had been completely ripped apart. The other sensor had this plugged in. I'm not convinced this is just an extension because of the heatshrink bulge in the middle. Possibly some sort of capacitor or resistor to alter the signal?
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with.... 2003 Torch Red Mach 1 ★ Rebuilt 3650 & MGW ★ Spec 2 & Fidanza flywheel ★ H&R Super Sports & Maximum Motorsports struts/shocks ★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates ★ Mosers + ARPs ★ Brembo slotted rotors, braided lines ★ Catless X and SLP LM2s ★ 18X9/10.5 - Toyo R888R Last edited by Tommy Z; 10-28-2017 at 08:46 AM. |
10-26-2017, 04:43 PM | #2 |
Registered User
Join Date: Mar 2010
Location: Wyoming, MI
Posts: 425
|
Re: Help Identifying Extension/Delete
Since you have a catless X pipe I would bet it's a MIL eliminator for the rear O2 sensor.
__________________
SLP Long tubes and O/R X pipe, Magnaflow cat back, K&N CAI, PHP intake spacer, 01 Cobra intake cam, 4.10s |
10-26-2017, 05:59 PM | #3 | |
Registered User
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
|
Quote:
Yup. I think I was freaking out a little and posted before looking around ha. So what's the general opinion on these? Should I order another new matching pair? Are they even worth the money? I'm also showing P0158 and P0161 codes but they are surprisingly for bank 2 only (the side that had this MIl eliminator still in tact).
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with.... 2003 Torch Red Mach 1 ★ Rebuilt 3650 & MGW ★ Spec 2 & Fidanza flywheel ★ H&R Super Sports & Maximum Motorsports struts/shocks ★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates ★ Mosers + ARPs ★ Brembo slotted rotors, braided lines ★ Catless X and SLP LM2s ★ 18X9/10.5 - Toyo R888R Last edited by Tommy Z; 10-28-2017 at 08:47 AM. |
|
10-26-2017, 07:48 PM | #4 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Help Identifying Extension/Delete
Good luck finding new ones, the feds got on people for selling things to get around emissions laws. You have to make your own or find someone still willing to turn em off in t eh tune to avoid a CEL
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
10-26-2017, 10:07 PM | #5 |
Registered User
Join Date: May 2008
Location: Waveland MS
Posts: 326
|
Re: Help Identifying Extension/Delete
I have a never use set from bbk.
|
10-27-2017, 06:28 AM | #6 | |
Registered User
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
|
Quote:
Oh, dang. Had no idea. I ran across a diagram somewhere showing how to make them. It didn't seem too difficult so I may take a stab at it.
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with.... 2003 Torch Red Mach 1 ★ Rebuilt 3650 & MGW ★ Spec 2 & Fidanza flywheel ★ H&R Super Sports & Maximum Motorsports struts/shocks ★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates ★ Mosers + ARPs ★ Brembo slotted rotors, braided lines ★ Catless X and SLP LM2s ★ 18X9/10.5 - Toyo R888R Last edited by Tommy Z; 10-28-2017 at 08:47 AM. |
|
10-27-2017, 07:37 AM | #7 |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: Help Identifying Extension/Delete
American Muscle shows a set of MIL eliminators for about $50.
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
10-27-2017, 12:27 PM | #8 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
__________________
|
10-27-2017, 01:22 PM | #9 |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: Help Identifying Extension/Delete
I have had a set of Steeda MIL eliminators in my Mach1 for at least 12 years, still working.
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
10-27-2017, 10:39 PM | #10 |
Registered User
Join Date: Nov 2016
Location: Central California
Posts: 219
|
Re: Help Identifying Extension/Delete
I’ve tried three brands of MILs and none of them worked, I still think they’re a scam. Got a tuner and that fixed everything right up and permanently. I’d like to see a coyote knock a tune off a car.
__________________
2003 TORCH RED Mach 1 Auto SLP Loudmouth 1 Mac O/R ProChamber ICT Billet 1/2in Spacer JLT Ram Air Intake FRPP 4.10 Gears FRPP Aluminum DriveShaft SCT REV X Tuner Black 17X9 1995 Cobra Rs |
10-28-2017, 08:49 AM | #11 |
Registered User
Join Date: Jun 2011
Location: Midland, Texas
Posts: 787
|
Re: Help Identifying Extension/Delete
Is it a mail order tune on that SCT or a pre-written one?
__________________
No accident that my birthday is March 1st. Take out the 'r' and you end up with.... 2003 Torch Red Mach 1 ★ Rebuilt 3650 & MGW ★ Spec 2 & Fidanza flywheel ★ H&R Super Sports & Maximum Motorsports struts/shocks ★ Maximum Motorsports rear lowers, MM panhard, MM caster camber plates ★ Mosers + ARPs ★ Brembo slotted rotors, braided lines ★ Catless X and SLP LM2s ★ 18X9/10.5 - Toyo R888R |
10-28-2017, 11:28 PM | #12 |
Registered User
Join Date: Nov 2016
Location: Central California
Posts: 219
|
Re: Help Identifying Extension/Delete
Mail order time
__________________
2003 TORCH RED Mach 1 Auto SLP Loudmouth 1 Mac O/R ProChamber ICT Billet 1/2in Spacer JLT Ram Air Intake FRPP 4.10 Gears FRPP Aluminum DriveShaft SCT REV X Tuner Black 17X9 1995 Cobra Rs |
10-29-2017, 09:09 AM | #13 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Help Identifying Extension/Delete
Quote:
Same here.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|