2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > Mustangs Parts For Sale/Wanted

Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here!

Reply
 
Thread Tools Display Modes
Old 12-06-2008, 12:14 AM   #1
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Custom Mach 1 Grill Emblem

I made myself a custom Mach 1 grill emblem, and I've had some interest from others who wanted it. So I decided I could make a few and post them up for sale. The brackets are powdercoated black, and the letters are OEM Mach 1 letters. Price will be $80 shipped to your door and ready to bolt onto your car.

Here's a few pics of the one I made for my car:







__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com

Last edited by TorchedMach1; 05-11-2009 at 09:54 PM.
TorchedMach1 is offline   Reply With Quote
Old 12-06-2008, 01:04 PM   #2
FastEddie09
Registered User
 
FastEddie09's Avatar
 
Join Date: Apr 2008
Location: Chicago, IL
Posts: 370
Re: Custom Mach 1 Grill Emblem

Looks like I'll be the 2nd person besides you with this .......I'll post some pics on the car as soon as it gets here.

Thanks again, Eddie
__________________
2003 Mach 1 (The Black Slowmatic)
13.1 @ 106mph / 2.05 60ft before stall and dr
  • Tuned by Tim Barth @ Mr Norms Garage
  • 4200 Stall - BC Automotive
  • Nitto NT05-R 275/40/17
  • MM FLSFC
  • HPM Megabite JR LCAs
  • CHE adjustable UCAs
  • Tociko D-Specs
  • Eibach Pro Kit
  • 31 Spline Cobra diff
  • 31 Spline Mosers
  • FRPP Axle girdle
  • 4.10 Gears
  • FRPP Aluminum DS
  • K&N Intake
  • Intake spacer 3/8
  • O/R X pipe w/ Magnaflows
  • Shaker air diverter
FastEddie09 is offline   Reply With Quote
Old 12-06-2008, 01:39 PM   #3
swoop1156
Parked again...
 
swoop1156's Avatar
 
Join Date: Jul 2006
Location: Pensacola, Florida
Posts: 2,041
Re: Custom Mach 1 Grill Emblem

I like it and I don't like it at the same time. Hmm. I never usually have that problem. But, thanks for showing me what the 99-01 Cobra bumper looks like with the '03 Cobra chin. I was wondering about that.
__________________
Sold but not forgotten...
2004 Torch Red Mach 1
IUP / 5-Speed

Mach #238576
Modifications | Borla Stinger's | Painted C&L Intake | 15% Tint | Powdercoated Valve Covers | '01 Cobra Tails | '04 Cobra Mirrors | '01 Cobra Bumper | '01 Bullitt Skirts | FR500 Steering Wheel | MGW Shifter | 3/8" Spacer | IAC Restrictor | 17x9/10.5 Mach's | 275/315 Vredestein's | MM Subframe Connectors | Tokico D-Spec's | MM 4-Bolt C/C Plates | H&R Super Sport's |
Build Number | #6935 of 7182
swoop1156 is offline   Reply With Quote
Old 12-07-2008, 05:48 PM   #4
02gtfromky
Registered User
 
02gtfromky's Avatar
 
Join Date: Jul 2008
Location: Danville, ky
Posts: 165
Re: Custom Mach 1 Grill Emblem

How well did that chin fit, have to do much to it to make it fit.
I have the mach 1 chin on my 99/01 bumper and it doesnt fit that great
jon
02gtfromky is offline   Reply With Quote
Old 12-08-2008, 05:49 PM   #5
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Quote:
Looks like I'll be the 2nd person besides you with this .......I'll post some pics on the car as soon as it gets here.

Thanks again, Eddie
So far we will be the only two with anything like it. Let me know when it gets there, and what ya think.

Quote:
Originally Posted by swoop1156 View Post
I like it and I don't like it at the same time. Hmm. I never usually have that problem. But, thanks for showing me what the 99-01 Cobra bumper looks like with the '03 Cobra chin. I was wondering about that.
I was the same way at the beginning along with a few buddies. But it grows on ya quick and we all love it. So buy one! :LAUGH:

Quote:
How well did that chin fit, have to do much to it to make it fit.
I have the mach 1 chin on my 99/01 bumper and it doesnt fit that great
jon
Yeah I've recently took off the that chin. It didn't fit that great either. Somebody should make a cool chin for the 99-01 Cobra Front bumper.
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 12-08-2008, 09:40 PM   #6
swoop1156
Parked again...
 
swoop1156's Avatar
 
Join Date: Jul 2006
Location: Pensacola, Florida
Posts: 2,041
Re: Custom Mach 1 Grill Emblem

Quote:
Originally Posted by TorchedMach1 View Post
Somebody should make a cool chin for the 99-01 Cobra Front bumper.
No kidding!
__________________
Sold but not forgotten...
2004 Torch Red Mach 1
IUP / 5-Speed

Mach #238576
Modifications | Borla Stinger's | Painted C&L Intake | 15% Tint | Powdercoated Valve Covers | '01 Cobra Tails | '04 Cobra Mirrors | '01 Cobra Bumper | '01 Bullitt Skirts | FR500 Steering Wheel | MGW Shifter | 3/8" Spacer | IAC Restrictor | 17x9/10.5 Mach's | 275/315 Vredestein's | MM Subframe Connectors | Tokico D-Spec's | MM 4-Bolt C/C Plates | H&R Super Sport's |
Build Number | #6935 of 7182
swoop1156 is offline   Reply With Quote
Old 12-11-2008, 10:11 PM   #7
nikbait
Guest
 
Posts: n/a
Re: Custom Mach 1 Grill Emblem

Very nice! I like it.
  Reply With Quote
Old 12-11-2008, 10:40 PM   #8
yinks281
S281
 
Join Date: Mar 2007
Location: Texas
Posts: 562
Re: Custom Mach 1 Grill Emblem

can I see some pics of those wheels. They look nice. The emblem is innovative I might just pick one up.
__________________
S281
yinks281 is offline   Reply With Quote
Old 12-11-2008, 10:48 PM   #9
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Pm sent

Here's a link to that has some better pics of my wheels. Just scroll down a tad.

http://www.mach1registry.org/forums/...ad.php?t=86726
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 12-31-2008, 09:31 AM   #10
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

bump
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 01-05-2009, 08:24 PM   #11
04_Mach
Registered User
 
04_Mach's Avatar
 
Join Date: May 2008
Location: Virginia Beach, VA
Posts: 33
Re: Custom Mach 1 Grill Emblem

Hey man I want one of these. Do they come in any colors or what?? I get paid friday so the money will be in to you sometime after that. PM me and let me know
__________________
2004 Screamin' Yellow Mach 1: FRPP 3:73's, 6 point roll cage, and a lot more to come.
04_Mach is offline   Reply With Quote
Old 01-05-2009, 10:11 PM   #12
whoffman
Registered User
 
whoffman's Avatar
 
Join Date: Nov 2005
Location: Shrevport La
Posts: 1,110
Re: Custom Mach 1 Grill Emblem

you have any left???
__________________
PERFORMANCE

Mac Lt & Mac off road X pipe
JLT RAI
MGW Shifter
Moser 31 spline axles 456 gears auburn true trac differential
PSR K member & MM front and rear coil over's, heavy duty lower control arms
Steeda 4 point caster camber plates
CCW 16x5.5" fronts 16x10" rears w/ Hoosier 28x10 slicks
Cobra side skirts
6000 HID
Steeda STB
interior guages
03-04 cobra mirrors
whoffman is offline   Reply With Quote
Old 01-05-2009, 11:26 PM   #13
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Sent both of ya PM's
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 01-06-2009, 12:40 AM   #14
chitownmikey
Registered User
 
Join Date: Oct 2007
Location: Chicago, IL
Posts: 57
Re: Custom Mach 1 Grill Emblem

Just sent payment.
Was informed that it will be shipped within one week from today as he has to custom make them.
Will keep everyone updated on the progress.

Regards
__________________
10/13/2007 - was the day I became a happy owner of a 2003 DSG Mach1
Borla Stinger Cat Back // Mac Off Road H Pipe // MGW Short Shifter // JLT RAI // Roy's Intake Spacer // Accufab Throttle Body // SCT Tuned
chitownmikey is offline   Reply With Quote
Old 01-06-2009, 12:44 AM   #15
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

I received Payment and will get it on its way to ya as soon as possible.
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 01-12-2009, 11:11 PM   #16
FastEddie09
Registered User
 
FastEddie09's Avatar
 
Join Date: Apr 2008
Location: Chicago, IL
Posts: 370
Re: Custom Mach 1 Grill Emblem

These emblems are great. I cant seem to get a good pic, due to the way the car is stored in the garage right now. I wish you guys could see this in person. Great quality, and customer service.
__________________
2003 Mach 1 (The Black Slowmatic)
13.1 @ 106mph / 2.05 60ft before stall and dr
  • Tuned by Tim Barth @ Mr Norms Garage
  • 4200 Stall - BC Automotive
  • Nitto NT05-R 275/40/17
  • MM FLSFC
  • HPM Megabite JR LCAs
  • CHE adjustable UCAs
  • Tociko D-Specs
  • Eibach Pro Kit
  • 31 Spline Cobra diff
  • 31 Spline Mosers
  • FRPP Axle girdle
  • 4.10 Gears
  • FRPP Aluminum DS
  • K&N Intake
  • Intake spacer 3/8
  • O/R X pipe w/ Magnaflows
  • Shaker air diverter
FastEddie09 is offline   Reply With Quote
Old 01-14-2009, 02:25 AM   #17
cobrasvtcoupe25
Registered User
 
cobrasvtcoupe25's Avatar
 
Join Date: Aug 2008
Location: Bay Area, CA
Posts: 60
Re: Custom Mach 1 Grill Emblem

Quote:
Originally Posted by TorchedMach1 View Post
Yeah I've recently took off the that chin. It didn't fit that great either. Somebody should make a cool chin for the 99-01 Cobra Front bumper.
I've found this one btw

http://www.maierracing.com/

P.S. - Cool custom grill emblem
__________________
1999 COBRA #1945 of 4040 - Built SRA w/ 4.56's , PP Lower w/ 3/8 spacer, Bolt-ons, BBS RK's 18 x 8.5/10, Full Exhaust, Suspension, Can Diablo Tune and some 01/03 Cobra body parts
cobrasvtcoupe25 is offline   Reply With Quote
Old 01-16-2009, 11:48 PM   #18
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Just to let you guys know there brackets are now being powdercoating black for durability.
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 01-28-2009, 12:31 AM   #19
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Hey guys just gonna let you know I just got a batch of these finished up and I made a few extras. I have three left for sale.
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 02-05-2009, 01:44 PM   #20
chitownmikey
Registered User
 
Join Date: Oct 2007
Location: Chicago, IL
Posts: 57
Re: Custom Mach 1 Grill Emblem

*Update*

I did receive the emblem today. Everything looks good, I would buy from TorchedMach1 again. Very honest and informative guy.

I will put it on my mach and take pictures as soon as it gets warmer.
__________________
10/13/2007 - was the day I became a happy owner of a 2003 DSG Mach1
Borla Stinger Cat Back // Mac Off Road H Pipe // MGW Short Shifter // JLT RAI // Roy's Intake Spacer // Accufab Throttle Body // SCT Tuned
chitownmikey is offline   Reply With Quote
Old 02-05-2009, 10:49 PM   #21
ScreamingMach46
Registered User
 
ScreamingMach46's Avatar
 
Join Date: Dec 2008
Location: Chicago, IL
Posts: 907
Re: Custom Mach 1 Grill Emblem

Quote:
Originally Posted by chitownmikey View Post
*Update*

I did receive the emblem today. Everything looks good, I would buy from TorchedMach1 again. Very honest and informative guy.

I will put it on my mach and take pictures as soon as it gets warmer.
Take some pics saturday. 50*:THUMBSUP:
__________________
2004 Mach 1 - Screaming Yellow - 5 speed - IUP - 1 of 624
Full Bolt-ons, Built Rear, NX 100 shot, tune by Tim Barth @ MPH
N/A - 12.7 @ 107 (1.70)
N2O - 380rwhp 487rwtq
12.03 @ 110 (1.55)

SOLD

2004 Cobra - Screaming Yellow - T56 - 1 of 299
KB 2.8H @ 20lbs, 98 Intake Cams, E85, Tune by Tim Barth @ MPH
711rwhp 635rwtq
ScreamingMach46 is offline   Reply With Quote
Old 02-05-2009, 11:03 PM   #22
WuD
Registered User
 
WuD's Avatar
 
Join Date: Mar 2007
Location: Covington, Ga.
Posts: 475
Re: Custom Mach 1 Grill Emblem

i like it too....

will you be making more soon?
WuD is offline   Reply With Quote
Old 02-05-2009, 11:42 PM   #23
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

Quote:
Originally Posted by chitownmikey View Post
*Update*

I did receive the emblem today. Everything looks good, I would buy from TorchedMach1 again. Very honest and informative guy.

I will put it on my mach and take pictures as soon as it gets warmer.
Thanks man! Can't wait to see some pics of it on your DSG!

Quote:
i like it too....

will you be making more soon?
I have 2 left! Sent ya a PM. I also updated first post.
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Old 02-09-2009, 03:34 PM   #24
WuD
Registered User
 
WuD's Avatar
 
Join Date: Mar 2007
Location: Covington, Ga.
Posts: 475
Re: Custom Mach 1 Grill Emblem

PM returned........didn't get the notification of a PM or reply to this thread. gotta check my settings again.
WuD is offline   Reply With Quote
Old 02-10-2009, 11:51 AM   #25
TorchedMach1
TorchedMach1
 
TorchedMach1's Avatar
 
Join Date: Mar 2006
Location: Phoenix, AZ
Posts: 798
Re: Custom Mach 1 Grill Emblem

WuD your emblem will be on it was soon.

I only have one of these left!!!
__________________
Arizona's Fastest Mach 1
11.14 @ 120 w/ 1.48 60'
3300 lbs With Driver

GO-FAST MODS
O/R H-Pipe
Magnaflow Catback
K&N FIPK GEN II
Roy's Composite Spacer
T-56 6 Speed
Liberty 26 Spline Input Shaft
Steeda Tri-Ax
Spec Stage 3+ Clutch
Aluminum Flywheel
Aluminum Driveshaft
Built 31 Spline Rear w/ 4.30's
Rear upper and Lower Control Arms
NX Wet Kit (100 Shot)
SCT Chip
Custom Tune by Devin @ www.performancesolutionracing.com
TorchedMach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<