Insert Your Exhaust Sound Clips Here - 2003-04 Mach 1 Registry Owners Club

Orange whip 04 · 04-25-2006, 01:07 AM

Maybe it would be easy if everyone was to just submit your sound clips all under this post and have a moderator sticky this for us so we can find it fast when we need to find a certain exhaust setup ? Just give a brief listing of your setup and link to your clip. Easy as pie.

P.S. Be specific on your setup... example

Headers: Stock
Mid pipe: SLP offroad X
Cat back: SLP loudmouth1 resonators

black_mach_03 · 04-25-2006, 07:41 AM

JBA Mid-length headers
JBA catted H-pipe
No mufflers/piping stops at the rear axle/turndowns
Bunch of vacuum lines disconnected

idle/rev 6000 rpm

http://videos.streetfire.net/search/...1F3159D5C9.htm

mgk2 · 04-25-2006, 09:30 AM

I found the video clarity excelent, sorry there was some wind flutter. I too choose the stainless steel bumper inserts for my blue Mach 1. I am very anxious to receive and install my Kooks headers and catted x-pipe to mate to my Borla stingers.
I hope to post also!
Mike

Orange whip 04 · 04-25-2006, 11:09 PM

Is this post worth a sticky Moderators ?

So our sound clips dont get lost. They will always be near the top for the future which will provide quick access to the links. Thanks

Orange whip 04 · 04-26-2006, 12:10 AM

These clips are irrelavant to the 4.6 4 valve, but for those of you inquiring of 5.0 liter exhaust sounds i thought i would throw this in for you. This is what the SLP cat back sounds like on a 5.0.

Headers - stock

Mid pipe - MAC Offroad H-pipe

Cat back - SLP Loudmouth 1 Resonators (1987-93 GT systems use part number SLP-31016).

Idle/Rev- http://www.stangnet.com/media/slp_idel_rev.mp3

Take off- http://www.stangnet.com/media/slp_takeoff.mp3

Inside- http://www.stangnet.com/media/slp_inside.mp3

Orange whip 04 · 04-26-2006, 12:34 AM

Brought to you by fas4d.

Headers - Stock

Mid pipe - MAC offroad H pipe

Cat back - Stock pipe with cut in Flowmasters.

http://videos.streetfire.net/video/E...B2F0E0ECD6.htm

Orange whip 04 · 04-26-2006, 12:42 AM

Brought to you by Mach1nut

Headers - stock

Mid pipe - Bassani offroad X pipe

Cat back - Flowmasters Delta Flow 40's welded in.

http://videos.streetfire.net/Player....6-17D9C94EAD8B

Orange whip 04 · 04-26-2006, 12:58 AM

Brought to you by Mach1nut - A before and after prespective.

Headers - stock

Mid pipe - Factory cats

Cat back - Factory stock

After

Headers - stock

Mid pipe - Bassani Catted X-pipe

Cat back - Flowmasters Delta flow 40 series

http://videos.streetfire.net/video/E...93F2E093D1.htm

Orange whip 04 · 04-26-2006, 01:27 AM

Brought to you by black mach 03.

Headers - JBA Mid-Length Headers

Mid pipe - JBA Catted H-Pipe

Cat back - No Mufflers/Turndowns

http://videos.streetfire.net/player....E-75BBE56293CE

Orange whip 04 · 04-26-2006, 01:33 AM

Brought to you by BlueDevil04

Headers - Hooker Long Tubes

Mid pipe - Hooker shorty O/R X Pipe

Cat back - Single Chamber Flowmasters

http://videos.streetfire.net/Player....E-B87DF6C57B3A

http://videos.streetfire.net/Player....7-26F0E855EC32

http://media.putfile.com/04-Mach-1-3

http://media.putfile.com/04-Mach-1-2

http://media.putfile.com/04-Mach-1

StevesTorchRed · 02-07-2009, 05:14 PM

Quote:

Originally Posted by Orange whip 04

Brought to you by BlueDevil04

Headers - Hooker Long Tubes

Mid pipe - Hooker shorty O/R X Pipe

Cat back - Single Chamber Flowmasters

http://videos.streetfire.net/Player....E-B87DF6C57B3A

http://videos.streetfire.net/Player....7-26F0E855EC32

http://media.putfile.com/04-Mach-1-3

http://media.putfile.com/04-Mach-1-2

http://media.putfile.com/04-Mach-1

I like that, I have hooker lts waiting to go in but was just gonna do header to straight pipe with my magnaflow resonators in it.

tom281 · 03-21-2009, 09:05 PM

Factory manifolds, Mac offroad H, and Borla ProXS mufflers welded into the factory axle pipes. 4" rolled tips.

http://www.youtube.com/watch?v=FNHlLJFhChc

Madmax305 · 03-21-2009, 09:42 PM

Here's mine: Bassani headers/catted x-pipe, SS cat back....

http://www.youtube.com/watch?v=smBbw...e=channel_page

03-28-2009, 09:12 PM

Anyone got a clip of bassani catback with mrt catted h? I had found one on youtube, but cannot seem to find it again.

Mudd92 · 09-02-2009, 07:21 PM

Anyone with an lt's o/r h and mac catback?>

Orange whip 04 · 04-26-2006, 01:50 AM

Brought to you by SPDASND

Headers - Stock

Mid pipe - Bassani Catted X-pipe

Cat back - Borla stingers

http://videos.streetfire.net/video/7...42B411709C.htm

Orange whip 04 · 04-26-2006, 02:04 AM

Brought to you by The Mach Says

Headers - Stock

Mid pipe - Stock

Cat back - Borla Stingers

http://videos.streetfire.net/Player....4-8A0E28769563

Orange whip 04 · 04-26-2006, 02:08 AM

Brought to you by BrianWannaMach

Headers - Stock

Mid pipe - Stock

Cat back - Borla Stingers

http://www.mustang-club.com/OnTheRoad/05mr_thu_1.wmv

Orange whip 04 · 04-26-2006, 02:15 AM

Brought to you by threefitydotcom

Headers - Stock

Mid pipe - Magnaflow Offroad X-pipe

Cat back - Magnaflow (Not the packs)

http://videos.streetfire.net/video/3...E81F0776D8.htm

Orange whip 04 · 04-26-2006, 02:27 AM

Brought to you by J1mJ1m

Headers - Stock

Mid pipe - SLP offroad X-pipe

Cat back - MAC SS system

http://videos.streetfire.net/video/1...0EE127888D.htm

http://videos.streetfire.net/video/1...915B4DD8EC.htm

Orange whip 04 · 04-26-2006, 02:37 AM

Brought to you by instantmassege

Headers - Stock

Mid pipe - MAC Offroad Prochamber

Cat back - Borla Stingers

http://videos.streetfire.net/video/5...7B523E27A9.htm

http://videos.streetfire.net/video/A...DC06D02D20.htm

Orange whip 04 · 04-26-2006, 02:50 AM

Brought to you by DTMach1

Headers - Stock

Mid pipe - MAC Offroad Prochamber

Cat back - SLP loudmouth 1 resonators

http://media.putfile.com/DT23

Orange whip 04 · 04-26-2006, 03:17 AM

Brought to you by BONESTOCK

Headers - Stock

Mid pipe - Bassani Offroad X-pipe

Cat back - Magnaflow ( Not the packs )

http://videos.streetfire.net/video/2...AD536464C9.htm

http://videos.streetfire.net/video/...DE1753CCA3B.htm

BONESTOCK · 05-02-2006, 04:33 AM

Quote:

Originally Posted by Orange whip 04

Brought to you by FstMach04

Headers - Stock

Mid pipe - Bassani Offroad X-pipe

Cat back - Magnaflow ( Not the packs )

http://videos.streetfire.net/video/2...AD536464C9.htm

Hah..I don't know who FstMach04 is but that's my vid and car. :THUMBSUP:

Here's an in car vid at the track! http://videos.streetfire.net/video/3...E1753CCA3B.htm

Orange whip 04 · 05-02-2006, 06:39 PM

Quote:

Originally Posted by BONESTOCK

Hah..I don't know who FstMach04 is but that's my vid and car. :THUMBSUP:

Here's an in car vid at the track! http://videos.streetfire.net/video/3...E1753CCA3B.htm

I will make the apropriate change Bonestock. Thanks for letting me know.

04-25-2006, 01:07 AM	#1
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Insert Your Exhaust Sound/Vid Clips Here Maybe it would be easy if everyone was to just submit your sound clips all under this post and have a moderator sticky this for us so we can find it fast when we need to find a certain exhaust setup ? Just give a brief listing of your setup and link to your clip. Easy as pie. P.S. Be specific on your setup... example Headers: Stock Mid pipe: SLP offroad X Cat back: SLP loudmouth1 resonators Last edited by Orange whip 04; 09-23-2006 at 02:24 AM.

04-25-2006, 07:41 AM	#2
black_mach_03 Registered User Join Date: Jan 2004 Location: Tucson, AZ Posts: 432	Re: Insert Your Exhaust Sound Clips Here JBA Mid-length headers JBA catted H-pipe No mufflers/piping stops at the rear axle/turndowns Bunch of vacuum lines disconnected idle/rev 6000 rpm http://videos.streetfire.net/search/...1F3159D5C9.htm __________________ BONE STOCK Last edited by black_mach_03; 05-03-2006 at 04:24 AM.

04-25-2006, 09:30 AM	#3
mgk2 Registered User Join Date: Aug 2002 Location: Pembroke Pines,Fla Posts: 986	Re: Insert Your Exhaust Sound Clips Here I found the video clarity excelent, sorry there was some wind flutter. I too choose the stainless steel bumper inserts for my blue Mach 1. I am very anxious to receive and install my Kooks headers and catted x-pipe to mate to my Borla stingers. I hope to post also! Mike

04-25-2006, 11:09 PM	#4
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Is this post worth a sticky Moderators ? So our sound clips dont get lost. They will always be near the top for the future which will provide quick access to the links. Thanks

04-26-2006, 12:10 AM	#5
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here These clips are irrelavant to the 4.6 4 valve, but for those of you inquiring of 5.0 liter exhaust sounds i thought i would throw this in for you. This is what the SLP cat back sounds like on a 5.0. Headers - stock Mid pipe - MAC Offroad H-pipe Cat back - SLP Loudmouth 1 Resonators (1987-93 GT systems use part number SLP-31016). Idle/Rev- http://www.stangnet.com/media/slp_idel_rev.mp3 Take off- http://www.stangnet.com/media/slp_takeoff.mp3 Inside- http://www.stangnet.com/media/slp_inside.mp3 Last edited by Orange whip 04; 04-26-2006 at 02:52 PM.

04-26-2006, 12:34 AM	#6
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by fas4d. Headers - Stock Mid pipe - MAC offroad H pipe Cat back - Stock pipe with cut in Flowmasters. http://videos.streetfire.net/video/E...B2F0E0ECD6.htm

04-26-2006, 12:42 AM	#7
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by Mach1nut Headers - stock Mid pipe - Bassani offroad X pipe Cat back - Flowmasters Delta Flow 40's welded in. http://videos.streetfire.net/Player....6-17D9C94EAD8B Last edited by Orange whip 04; 04-26-2006 at 02:51 PM.

04-26-2006, 12:58 AM	#8
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by Mach1nut - A before and after prespective. Headers - stock Mid pipe - Factory cats Cat back - Factory stock After Headers - stock Mid pipe - Bassani Catted X-pipe Cat back - Flowmasters Delta flow 40 series http://videos.streetfire.net/video/E...93F2E093D1.htm

04-26-2006, 01:27 AM	#9
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by black mach 03. Headers - JBA Mid-Length Headers Mid pipe - JBA Catted H-Pipe Cat back - No Mufflers/Turndowns http://videos.streetfire.net/player....E-75BBE56293CE

04-26-2006, 01:33 AM	#10
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BlueDevil04 Headers - Hooker Long Tubes Mid pipe - Hooker shorty O/R X Pipe Cat back - Single Chamber Flowmasters http://videos.streetfire.net/Player....E-B87DF6C57B3A http://videos.streetfire.net/Player....7-26F0E855EC32 http://media.putfile.com/04-Mach-1-3 http://media.putfile.com/04-Mach-1-2 http://media.putfile.com/04-Mach-1

03-21-2009, 09:05 PM	#12
tom281 forty-six & 2 Join Date: Jan 2005 Location: NE Indiana Posts: 508	Re: Insert Your Exhaust Sound Clips Here Factory manifolds, Mac offroad H, and Borla ProXS mufflers welded into the factory axle pipes. 4" rolled tips. http://www.youtube.com/watch?v=FNHlLJFhChc __________________ tom281 Current: 2003 Mach 1: black on black auto Basic bolt ons Previous: 2006 Vista Blue GT 11.74 @ 119, 3880lbs 450hp/450tq My keeper: '92 GT Convertible Emerald Green w/ White Lthr & Top Original Owner

03-21-2009, 09:42 PM	#13
Madmax305 Registered User Join Date: May 2004 Location: SOUTHERN CALIFORNIA Posts: 1,081	Re: Insert Your Exhaust Sound Clips Here Here's mine: Bassani headers/catted x-pipe, SS cat back.... http://www.youtube.com/watch?v=smBbw...e=channel_page __________________ MMR-950 5.0 STROKER PORT/POLISH-FRPP RACING CAMS KB 2.1 15LBS 570RWHP 550RWTQ (SAE) LDC COOLING MOD, DAVIS WP, 8-RIB BELT TKO 600 .82OD 3.55 GEARS EATON POSI/31 SPLINE AXLES COBRA TANK/PUMPS, SCT-2800 MAF, BAP 60LB INJ, FORE FUEL RAILS, -8AN FUEL LINE BASSANI HEADERS/X-PIPE CANTON 7QT PAN MM TUBULAR K-MEMBER/PANHARD BAR ALUMINUM D.S./FLYWHEEL BILSTEIN SPORT VALVE COILOVERS 4-PISTON BREMBO CALIPERS/ROTORS 18X9/18X10 CHROME BULLITS/NITTO DR'S 2001 COBRA FRONT COVER RET Tune

03-28-2009, 09:12 PM	#14
nikbait Guest Posts: n/a	Re: Insert Your Exhaust Sound Clips Here Anyone got a clip of bassani catback with mrt catted h? I had found one on youtube, but cannot seem to find it again.

09-02-2009, 07:21 PM	#15
Mudd92 03 Mach Join Date: Jan 2009 Location: Savannah, GA Posts: 1,396	Re: Insert Your Exhaust Sound Clips Here Anyone with an lt's o/r h and mac catback?> __________________ -03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey

04-26-2006, 01:50 AM	#16
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by SPDASND Headers - Stock Mid pipe - Bassani Catted X-pipe Cat back - Borla stingers http://videos.streetfire.net/video/7...42B411709C.htm

04-26-2006, 02:04 AM	#17
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by The Mach Says Headers - Stock Mid pipe - Stock Cat back - Borla Stingers http://videos.streetfire.net/Player....4-8A0E28769563

04-26-2006, 02:08 AM	#18
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BrianWannaMach Headers - Stock Mid pipe - Stock Cat back - Borla Stingers http://www.mustang-club.com/OnTheRoad/05mr_thu_1.wmv

04-26-2006, 02:15 AM	#19
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by threefitydotcom Headers - Stock Mid pipe - Magnaflow Offroad X-pipe Cat back - Magnaflow (Not the packs) http://videos.streetfire.net/video/3...E81F0776D8.htm

04-26-2006, 02:27 AM	#20
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by J1mJ1m Headers - Stock Mid pipe - SLP offroad X-pipe Cat back - MAC SS system http://videos.streetfire.net/video/1...0EE127888D.htm http://videos.streetfire.net/video/1...915B4DD8EC.htm

04-26-2006, 02:37 AM	#21
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by instantmassege Headers - Stock Mid pipe - MAC Offroad Prochamber Cat back - Borla Stingers http://videos.streetfire.net/video/5...7B523E27A9.htm http://videos.streetfire.net/video/A...DC06D02D20.htm Last edited by Orange whip 04; 04-26-2006 at 02:50 PM.

04-26-2006, 02:50 AM	#22
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by DTMach1 Headers - Stock Mid pipe - MAC Offroad Prochamber Cat back - SLP loudmouth 1 resonators http://media.putfile.com/DT23 Last edited by Orange whip 04; 04-26-2006 at 02:49 PM.

04-26-2006, 03:17 AM	#23
Orange whip 04 Never Fear Smith Is Here Join Date: Apr 2004 Location: Saline, Michigan Posts: 3,187	Re: Insert Your Exhaust Sound Clips Here Brought to you by BONESTOCK Headers - Stock Mid pipe - Bassani Offroad X-pipe Cat back - Magnaflow ( Not the packs ) http://videos.streetfire.net/video/2...AD536464C9.htm http://videos.streetfire.net/video/...DE1753CCA3B.htm Last edited by Orange whip 04; 05-02-2006 at 06:42 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)