|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
01-06-2013, 02:09 AM | #1 |
Registered User
Join Date: Mar 2009
Location: Houston, TX
Posts: 137
|
04 Mach 1 PMC and Married xcal3
I have the PCM from my 2004 Mach and the SCT X3 handheld that is married to it. It is from Bill CO mach that I bought. I have gone auto and the PCM I am using is a 2004 auto and I have already changed the wiring harness in the car and now cannot unmarry the two and just plan to get a new one from the tuner I plan to use. If I had access to another 04 Mach then I guess I could swap in PCM and pull tune, but at this time I dont.
Handheld says it has 5 unlocks so I assume it has a custom tune on it. I also am not sure of the tune currently on it unless Bill chimes in. Wanting to get $300 for both. Sent via talk to text...mistakes expected. |
01-07-2013, 11:58 AM | #2 |
Registered User
Join Date: Mar 2009
Location: Houston, TX
Posts: 137
|
Re: 04 Mach 1 PMC and Married xcal3
Emailed Bill and noted the tune on the PCM and XCal 3 are for:
The last tune it had was for a Whipple 3.4, E85, T-56 transmission, and return style fuel system. Again this can all be removed once the PCM is installed and the tune removed. Or get an unlocked SCT X3 and sale the PCM off for cheap or keep as a back up. |
01-09-2013, 10:41 PM | #3 |
Registered User
Join Date: Mar 2009
Location: Houston, TX
Posts: 137
|
Re: 04 Mach 1 PMC and Married xcal3
Sold
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|